LP2992IM5-1.5 Rochester Electronics component image

LP2992IM5-1.5

In Stock

Rochester Electronics logo Rochester Electronics · franchised distributor

IC REG LINEAR 1.5V 250MA SOT23-5

Listed in PMIC - Voltage Regulators - Linear

20,032 pcs in stock ships same day before 6pm

from $0.2500

Quantity Unit Price
1+ $0.2500 BEST
100% Original Same-Day Ship 180-Day Warranty Worldwide Delivery

Overview

What is the LP2992IM5-1.5?

LP2992IM5-1-5 is a ic reg linear 1.5v 250ma sot23-5, featuring the SC-74A, SOT-753 package, Surface Mount mounting. Stocked at Xinyun IC — volume pricing and datasheet support available on request.

Same Series

Rochester Electronics Series Variants in Stock

10 variants of this series in stock
Part Number Description Stock Unit Price Status
LP2992AIM5X-1.5/NOPB IC REG LINEAR 1.5V 250MA SOT23-5 10,238 $0.4900 In Stock
LP2992AIM5-1.8 IC REG LINEAR FIXED POS LDO REG 9,659 $0.5200 In Stock
LP2992AILD-1.8 IC REG LINEAR 1.8V 250MA 6WSON 9,654 $0.5200 In Stock
LP2992IM5-5.0 IC REG LINEAR FIXED POS LDO REG 9,658 $0.5200 In Stock
MC33463H-50KT1 IC REG LIN SWITCHING VOLT MODE 9,657 $0.5200 In Stock
LP2992ILDX-5.0 IC REG LINEAR FIXED POS LDO REG 17,900 $0.2800 In Stock
LP2992AIM5X-2.5 IC REG LINEAR FIXED POS LDO REG 8,235 $0.6100 In Stock
LP2992IM5X-1.8 IC REG LINEAR FIXED POS LDO REG 20,037 $0.2500 In Stock
MAX8841ELT26+T IC REG LINEAR ULTRA LO NOISE LDO 9,657 $0.5200 In Stock
+ 1 more variants in stock — browse the full category

Technical Parameters

LP2992IM5-1.5 Specifications

Series -
Package Bulk
Part Status Obsolete
Output Configuration Positive
Output Type Fixed
Number of Regulators 1
Voltage - Input (Max) 16V
Voltage - Output (Min/Fixed) 1.5V
Voltage - Output (Max) -
Voltage Dropout (Max) 0.85V @ 250mA
Current - Output 250mA
Current - Quiescent (Iq) 95 µA
Current - Supply (Max) 4 mA
PSRR 45dB (1kHz)
Control Features Enable
Protection Features Over Current, Over Temperature, Short Circuit
Operating Temperature -40°C ~ 125°C
Mounting Type Surface Mount
Package / Case SC-74A, SOT-753
Supplier Device Package SOT-23-5

Buying Guide

Choosing Integrated Circuits (ICs)

Choosing an IC starts with the datasheet's absolute maximums and recommended operating conditions — never design to typical values. For microcontrollers, budget 30–50% flash/RAM headroom and verify peripheral availability in the exact package (pin-count often removes features). For power ICs, check the controller's minimum on-time, bootstrap voltage and thermal derating at your switching frequency. Interface transceivers must match the bus standard's fault ratings — RS-485 common-mode range, CAN bus fault protection (±40 V or system-level parts). Verify the moisture sensitivity level (MSL) for BGA/QFN parts in your reflow process, and always order by full part number including suffix (package, temperature grade, reel size) — the base number alone is ambiguous.

Same Manufacturer

Rochester Electronics Parts in Stock

Request a Quote

Need LP2992IM5-1.5 or an alternative?

Send your quantity — our team replies with pricing and lead time within 24 hours, from franchised channels only.