HMC546MS8GETR XinYun Electronics component image

HMC546MS8GETR

In Stock

XinYun Electronics logo XinYun Electronics · franchised distributor

IC RF SWITCH SPDT 2.2GHZ 8MSOP

Listed in RF Switches

727 pcs in stock ships same day before 6pm

from $4.2269

Quantity Unit Price
1 - 499 $7.3800
500 - 999 $4.6965
1,000+ $4.2269 BEST
100% Original Same-Day Ship 180-Day Warranty Worldwide Delivery

Overview

What is the HMC546MS8GETR?

HMC546MS8GETR is a ic rf switch spdt 2.2ghz 8msop, featuring an insertion loss of 1.1dB, the 8-TSSOP, 8-MSOP (0.118", 3.00mm Width) case. Available from Xinyun IC with immediate dispatch and a 180-day warranty.

Same Series

XinYun Electronics Series Variants in Stock

10 variants of this series in stock
Part Number Description Stock Unit Price Status
110227-HMC514LP5 BOARD EVAL HMC514LP5E 48 $513.3600 In Stock
110123-HMC546MS8G EVAL BOARD HMC546MS8G 49 $513.3600 In Stock
110126-HMC546MS8G BOARD EVAL HMC546MS8GE 915MHZ 59 $513.3600 In Stock
110124-HMC546MS8G EVAL BOARD HMC546MS8G 55 $513.3600 In Stock
123987-HMC736LP4 BOARD EVAL HMC736LP4E 42 $513.3600 In Stock
115201-HMC546LP2 BOARD EVAL HMC546LP2E 2015MHZ 44 $513.3600 In Stock
DC9018A-C BOARD DEMO WIRELESSHART RF CERT 57 $500.0000 In Stock
DC9020B BOARD SMARTMESH IP MGR MMCX ANT 47 $500.0000 In Stock
HMC546MS8GE IC RF SWITCH SPDT 2.2GHZ 8MSOP 713 $7.3800 In Stock
+ 1 more variants in stock — browse the full category

Technical Parameters

HMC546MS8GETR Specifications

Series -
Package Tape & Reel (TR)Cut Tape (CT)Digi-Reel®
Part Status Active
RF Type Cellular
Topology -
Circuit SPDT
Frequency Range 200MHz ~ 2.2GHz
Isolation 30dB
Insertion Loss 1.1dB
Test Frequency 2.17GHz
P1dB 43dBm
IIP3 -
Features -
Impedance 50Ohm
Voltage - Supply 3V
Operating Temperature -40°C ~ 85°C
Package / Case 8-TSSOP, 8-MSOP (0.118", 3.00mm Width)
Supplier Device Package 8-MSOP

Buying Guide

Choosing RF/IF and RFID

RF component selection lives and dies by the frequency-conditioned numbers. Judge filters by insertion loss and return loss at the band edges, not center; check passband ripple for modulation-sensitive links. Baluns must cover the full band with amplitude balance ±0.5 dB and phase ±5° or your modulation quality (EVM) degrades. For amplifiers, distinguish small-signal gain from compression: back off 8–10 dB from P1dB for linear modulation, more for high-order QAM. Verify 50 Ω match assumptions — antenna ports and differential chains need their matching networks at design frequency. Finally, respect PCB layout as part of the component: ground vias, pad geometry and trace length all sit inside the signal path above ~1 GHz; datasheet evaluation-board layouts are the safest reference.

Same Manufacturer

XinYun Electronics Parts in Stock

Request a Quote

Need HMC546MS8GETR or an alternative?

Send your quantity — our team replies with pricing and lead time within 24 hours, from franchised channels only.