HMC546MS8GE XinYun Electronics component image

HMC546MS8GE

In Stock

XinYun Electronics logo XinYun Electronics · franchised distributor

IC RF SWITCH SPDT 2.2GHZ 8MSOP

Listed in RF Switches

713 pcs in stock ships same day before 6pm

from $4.1537

Quantity Unit Price
1 - 9 $7.3800
10 - 24 $6.7688
25 - 99 $6.1536
100 - 249 $5.5382
250 - 499 $5.0767
500 - 999 $4.6152
1,000+ $4.1537 BEST
100% Original Same-Day Ship 180-Day Warranty Worldwide Delivery

Overview

What is the HMC546MS8GE?

HMC546MS8GE is a ic rf switch spdt 2.2ghz 8msop, featuring an insertion loss of 1.1dB, the 8-TSSOP, 8-MSOP (0.118", 3.00mm Width) case. Stocked at Xinyun IC — volume pricing and datasheet support available on request.

Same Series

XinYun Electronics Series Variants in Stock

10 variants of this series in stock
Part Number Description Stock Unit Price Status
110227-HMC514LP5 BOARD EVAL HMC514LP5E 48 $513.3600 In Stock
110123-HMC546MS8G EVAL BOARD HMC546MS8G 49 $513.3600 In Stock
110126-HMC546MS8G BOARD EVAL HMC546MS8GE 915MHZ 59 $513.3600 In Stock
110124-HMC546MS8G EVAL BOARD HMC546MS8G 55 $513.3600 In Stock
123987-HMC736LP4 BOARD EVAL HMC736LP4E 42 $513.3600 In Stock
115201-HMC546LP2 BOARD EVAL HMC546LP2E 2015MHZ 44 $513.3600 In Stock
DC9018A-C BOARD DEMO WIRELESSHART RF CERT 57 $500.0000 In Stock
DC9020B BOARD SMARTMESH IP MGR MMCX ANT 47 $500.0000 In Stock
HMC546MS8GETR IC RF SWITCH SPDT 2.2GHZ 8MSOP 727 $7.3800 In Stock
+ 1 more variants in stock — browse the full category

Technical Parameters

HMC546MS8GE Specifications

Series -
Package Strip
Part Status Active
RF Type WiMAX / WiBro
Topology Reflective
Circuit SPDT
Frequency Range 200MHz ~ 2.2GHz
Isolation 30dB
Insertion Loss 1.1dB
Test Frequency 2.17GHz
P1dB -
IIP3 43dBm
Features -
Impedance 50Ohm
Voltage - Supply -
Operating Temperature -40°C ~ 85°C
Package / Case 8-TSSOP, 8-MSOP (0.118", 3.00mm Width)
Supplier Device Package 8-MSOP

Buying Guide

Choosing RF/IF and RFID

RF component selection lives and dies by the frequency-conditioned numbers. Judge filters by insertion loss and return loss at the band edges, not center; check passband ripple for modulation-sensitive links. Baluns must cover the full band with amplitude balance ±0.5 dB and phase ±5° or your modulation quality (EVM) degrades. For amplifiers, distinguish small-signal gain from compression: back off 8–10 dB from P1dB for linear modulation, more for high-order QAM. Verify 50 Ω match assumptions — antenna ports and differential chains need their matching networks at design frequency. Finally, respect PCB layout as part of the component: ground vias, pad geometry and trace length all sit inside the signal path above ~1 GHz; datasheet evaluation-board layouts are the safest reference.

Same Manufacturer

XinYun Electronics Parts in Stock

Request a Quote

Need HMC546MS8GE or an alternative?

Send your quantity — our team replies with pricing and lead time within 24 hours, from franchised channels only.