HMC452ST89 XinYun Electronics component image

HMC452ST89

In Stock

XinYun Electronics logo XinYun Electronics · franchised distributor

IC RF AMP GP 400MHZ-2.2GHZ SOT89

Listed in RF Amplifiers

376 pcs in stock ships same day before 6pm

from $14.5775

Quantity Unit Price
1 - 59 $14.5775 BEST
60+ $14.5775 BEST
100% Original Same-Day Ship 180-Day Warranty Worldwide Delivery

Overview

What is the HMC452ST89?

HMC452ST89 is a ic rf amp gp 400mhz-2.2ghz sot89, featuring a frequency of 400MHz ~ 2.2GHz, the TO-243AA case. Stocked at Xinyun IC — volume pricing and datasheet support available on request.

Same Series

XinYun Electronics Series Variants in Stock

8 variants of this series in stock
Part Number Description Stock Unit Price Status
108712-HMC452ST89 BOARD EVAL HMC452ST89 1900MHZ 50 $361.6200 In Stock
110409-HMC452ST89 BOARD EVAL HMC452ST89E 400MHZ 56 $390.5100 In Stock
110384-HMC452ST89 BOARD EVAL HMC452ST89E 900MHZ 55 $325.4600 In Stock
109824-HMC452ST89 BOARD EVAL HMC452ST89E 2100MHZ 56 $390.5100 In Stock
110416-HMC452ST89 BOARD EVAL HMC452ST89E 470MHZ 52 $390.5100 In Stock
HMC452ST89E IC RF AMP GP 400MHZ-2.2GHZ 375 $14.7800 In Stock
HMC452ST89ETR IC RF AMP GP 400MHZ-2.2GHZ SOT89 381 $14.7800 In Stock
+ 1 more variants in stock — browse the full category

Technical Parameters

HMC452ST89 Specifications

Series -
Package Bulk
Part Status Active
Frequency 400MHz ~ 2.2GHz
P1dB 31.5dBm
Gain 9dB
Noise Figure 6.5dB
RF Type General Purpose
Voltage - Supply 5V
Current - Supply 510mA
Test Frequency 2.1GHz
Mounting Type Surface Mount
Package / Case TO-243AA
Supplier Device Package SOT-89

Buying Guide

Choosing RF/IF and RFID

RF component selection lives and dies by the frequency-conditioned numbers. Judge filters by insertion loss and return loss at the band edges, not center; check passband ripple for modulation-sensitive links. Baluns must cover the full band with amplitude balance ±0.5 dB and phase ±5° or your modulation quality (EVM) degrades. For amplifiers, distinguish small-signal gain from compression: back off 8–10 dB from P1dB for linear modulation, more for high-order QAM. Verify 50 Ω match assumptions — antenna ports and differential chains need their matching networks at design frequency. Finally, respect PCB layout as part of the component: ground vias, pad geometry and trace length all sit inside the signal path above ~1 GHz; datasheet evaluation-board layouts are the safest reference.

Same Manufacturer

XinYun Electronics Parts in Stock

Request a Quote

Need HMC452ST89 or an alternative?

Send your quantity — our team replies with pricing and lead time within 24 hours, from franchised channels only.