ESP32-D0WD-V3 Espressif Systems component image

ESP32-D0WD-V3

In Stock

Espressif Systems logo Espressif Systems · franchised distributor

IC RF TXRX+MCU BLUETOOTH WIFI

Listed in RF Transceiver ICs

2,822 pcs in stock ships same day before 6pm

from $1.8000

Quantity Unit Price
1+ $1.8000 BEST
100% Original Same-Day Ship 180-Day Warranty Worldwide Delivery

Overview

What is the ESP32-D0WD-V3?

ESP32-D0WD-V3 is a ic rf txrx+mcu bluetooth wifi, featuring a frequency of 2.412GHz ~ 2.484GHz, the 48-VFQFN Exposed Pad case. It is in stock at Xinyun IC with tiered pricing and same-day worldwide shipping.

Same Series

Espressif Systems Series Variants in Stock

10 variants of this series in stock
Part Number Description Stock Unit Price Status
ESP32-DEVKITC-32D-F EVAL BOARD FOR ESP-WROOM-32 534 $10.0000 In Stock
ESP32-S2-SAOLA-1R ESP32-S2-WROVER DEV 4MB FLASH 662 $8.0000 In Stock
ESP32-MeshKit ESP32-MESHKIT, THE SMART-LIGHT D 74 $120.0000 In Stock
ESP32-LCDKit HMI DEVELOPMENT BOARD,INTEGRATED 453 $12.0000 In Stock
ESP32-MeshKit-Sense ESP32-MESHKIT-SENSE, A DEVELOPME 210 $28.0000 In Stock
ESP32-DEVKITC EVAL BOARD FOR ESP-WROOM-32 2,082 RFQ In Stock
ESP32-WROOM-32 (16MB) WIFI MODULE 128MBITS SPI FLASH 1,091 $4.8000 In Stock
ESP32-WROOM-32 (8MB) WIFI MODULE 64 MBITS SPI FLASH 1,153 $4.5000 In Stock
ESP32-D0WDQ6-V3 IC RF TXRX+MCU BLUETOOTH WIFI 2,818 $1.8000 In Stock
+ 1 more variants in stock — browse the full category

Technical Parameters

ESP32-D0WD-V3 Specifications

Series ESP32
Package Tape & Reel (TR)Cut Tape (CT)Digi-Reel®
Part Status Active
Type TxRx + MCU
RF Family/Standard Bluetooth, WiFi
Protocol 802.11b/g/n, Bluetooth 4.2
Modulation 8DPSK, DSSS, DQPSK, OFDM
Frequency 2.412GHz ~ 2.484GHz
Data Rate (Max) 150Mbps
Power - Output 20.5dBm
Sensitivity -97dBm
Memory Size 448kB ROM, 520kB SRAM
Serial Interfaces ADC, I²C, I²S, SDIO, SPI, PWM, UART
GPIO 34
Voltage - Supply 2.3V ~ 3.6V
Current - Receiving 95mA ~ 100mA
Current - Transmitting 130mA ~ 240mA
Operating Temperature -40°C ~ 125°C
Mounting Type Surface Mount
Package / Case 48-VFQFN Exposed Pad
Supplier Device Package 48-QFN (5x5)

Buying Guide

Choosing RF/IF and RFID

RF component selection lives and dies by the frequency-conditioned numbers. Judge filters by insertion loss and return loss at the band edges, not center; check passband ripple for modulation-sensitive links. Baluns must cover the full band with amplitude balance ±0.5 dB and phase ±5° or your modulation quality (EVM) degrades. For amplifiers, distinguish small-signal gain from compression: back off 8–10 dB from P1dB for linear modulation, more for high-order QAM. Verify 50 Ω match assumptions — antenna ports and differential chains need their matching networks at design frequency. Finally, respect PCB layout as part of the component: ground vias, pad geometry and trace length all sit inside the signal path above ~1 GHz; datasheet evaluation-board layouts are the safest reference.

Cross-Brand Equivalents

Specs-Comparable Alternatives

Matched on package, key parameters and mounting
Part Number Description Stock Unit Price Match
ESP32-D0WDQ6-V3 IC RF TXRX+MCU BLUETOOTH WIFI 2,818 $1.8000 100%
Alternatives verified in stock at Xinyun IC Verify dielectric and reflow profile against the datasheet before release

Same Manufacturer

Espressif Systems Parts in Stock

Request a Quote

Need ESP32-D0WD-V3 or an alternative?

Send your quantity — our team replies with pricing and lead time within 24 hours, from franchised channels only.