DS1803E-100/T&R Maxim Integrated component image

DS1803E-100/T&R

In Stock

Maxim Integrated logo Maxim Integrated · franchised distributor

IC DGT POT 100KOHM 256TP 14TSSOP

Listed in Data Acquisition - Digital Potentiometers

3,958 pcs in stock ships same day before 6pm

RFQ for pricing — volume discounts available for this part.

100% Original Same-Day Ship 180-Day Warranty Worldwide Delivery

Overview

What is the DS1803E-100/T&R?

DS1803E-100-T-amp-R is a ic dgt pot 100kohm 256tp 14tssop, featuring the 14-TSSOP (0.173", 4.40mm Width) package, Surface Mount mounting, a supply range of 2.7V ~ 5.5V. Stocked at Xinyun IC — volume pricing and datasheet support available on request.

Same Series

Maxim Integrated Series Variants in Stock

21 variants of this series in stock
Part Number Description Stock Unit Price Status
DS1803E-50+T&R IC DGT POT 50KOHM 256TAP 14TSSOP 1,412 $3.6530 In Stock
DS1803Z-100+ IC DGTL POT 100KOHM 256TAP 16SO 1,055 $4.9500 In Stock
DS1803E-010+T&R IC DGT POT 10KOHM 256TAP 14TSSOP 1,411 $3.6530 In Stock
DS1803Z-050+T&R IC DGTL POT 50KOHM 256TAP 16SO 746 $7.0900 In Stock
DS1803E-100 IC DGT POT 100KOHM 256TP 14TSSOP 1,679 RFQ In Stock
DS1803Z-050/T&R IC DGTL POT 50KOHM 256TAP 16SO 1,659 RFQ In Stock
DS18030-010+ IC DGTL POT 10KOHM 256TAP 16DIP 1,055 $4.9500 In Stock
DS1803E-50/T&R IC DGT POT 50KOHM 256TAP 14TSSOP 3,156 RFQ In Stock
DS1803Z-010+ IC DGTL POT 10KOHM 256TAP 16SO 1,047 $4.9500 In Stock
DS1803Z-010+T&R IC DGTL POT 10KOHM 256TAP 16SOIC 739 $7.0900 In Stock
+ 11 more variants in stock — browse the full category

Technical Parameters

DS1803E-100/T&R Specifications

Series -
Package Tape & Reel (TR)
Part Status Obsolete
Taper Linear
Configuration Potentiometer
Number of Circuits 2
Number of Taps 256
Resistance (Ohms) 100k
Interface I²C
Memory Type Volatile
Voltage - Supply 2.7V ~ 5.5V
Features Selectable Address
Tolerance ±20%
Temperature Coefficient (Typ) 750ppm/°C
Mounting Type Surface Mount
Supplier Device Package 14-TSSOP
Package / Case 14-TSSOP (0.173", 4.40mm Width)
Operating Temperature -40°C ~ 85°C
Resistance - Wiper (Ohms) (Typ) 400

Buying Guide

Choosing Integrated Circuits (ICs)

Choosing an IC starts with the datasheet's absolute maximums and recommended operating conditions — never design to typical values. For microcontrollers, budget 30–50% flash/RAM headroom and verify peripheral availability in the exact package (pin-count often removes features). For power ICs, check the controller's minimum on-time, bootstrap voltage and thermal derating at your switching frequency. Interface transceivers must match the bus standard's fault ratings — RS-485 common-mode range, CAN bus fault protection (±40 V or system-level parts). Verify the moisture sensitivity level (MSL) for BGA/QFN parts in your reflow process, and always order by full part number including suffix (package, temperature grade, reel size) — the base number alone is ambiguous.

Cross-Brand Equivalents

Specs-Comparable Alternatives

Matched on package, key parameters and mounting
Part Number Description Stock Unit Price Match
DS1803E-100+ IC DGT POT 100KOHM 256TP 14TSSOP 1,060 $4.8500 100%
DS1845E-100+ IC DGTL POT 100KOHM 14TSSOP 1,480 $3.4600 100%
DS1803E-100+T&R IC DGT POT 100KOHM 256TP 14TSSOP 1,412 $3.6530 100%
DS1803E-100+ IC DGT POT 100KOHM 256TP 14TSSOP 1,060 $4.8500 100%
DS1845E-100+ IC DGTL POT 100KOHM 14TSSOP 1,480 $3.4600 100%
DS1845E-100+T&R IC DGTL POT 100KOHM 14TSSOP 4,207 RFQ 100%
Alternatives verified in stock at Xinyun IC Verify dielectric and reflow profile against the datasheet before release

Same Manufacturer

Maxim Integrated Parts in Stock

Request a Quote

Need DS1803E-100/T&R or an alternative?

Send your quantity — our team replies with pricing and lead time within 24 hours, from franchised channels only.