CRS2010-JW-4R7ELF J.W. Miller / Bourns component image

CRS2010-JW-4R7ELF

In Stock

J.W. Miller / Bourns logo J.W. Miller / Bourns · franchised distributor

RES SMD 4.7 OHM 5% 1W 2010

Listed in Chip Resistor - Surface Mount

8,660 pcs in stock ships same day before 6pm

from $0.1197

Quantity Unit Price
1 - 3,999 $0.5800
4,000 - 7,999 $0.1247
8,000 - 11,999 $0.1229
12,000+ $0.1197 BEST
100% Original Same-Day Ship 180-Day Warranty Worldwide Delivery

Overview

What is the CRS2010-JW-4R7ELF?

CRS2010-JW-4R7ELF is a res smd 4.7 ohm 5% 1w 2010, featuring a power rating of 1W, a tolerance of ±5%, a Thick Film composition, and the 2010 (5025 Metric) case. Stocked at Xinyun IC — volume pricing and datasheet support available on request.

Same Series

J.W. Miller / Bourns Series Variants in Stock

49 variants of this series in stock
Part Number Description Stock Unit Price Status
CRS0805-JX-100ELF RES SMD 10 OHM 5% 1/4W 0805 31,283 $0.1600 In Stock
CRS1206-FX-1000ELF RES SMD 100 OHM 1% 1/2W 1206 11,951 $0.4200 In Stock
CRS2010-FX-10R0ELF RES SMD 10 OHM 1% 1W 2010 6,612 $0.7600 In Stock
CRS0805-FX-1000ELF RES SMD 100 OHM 1% 1/4W 0805 23,844 $0.2100 In Stock
CRS1206-FX-1004ELF RES SMD 1M OHM 1% 1/2W 1206 11,943 $0.4200 In Stock
CRS2512-FX-1001ELF RES SMD 1K OHM 1% 2W 2512 7,189 $0.7000 In Stock
CRS1206-FW-1R00ELF RES SMD 1 OHM 1% 1/2W 1206 11,949 $0.4200 In Stock
CRS2010-FX-1004ELF RES SMD 1M OHM 1% 1W 2010 6,626 $0.7600 In Stock
CRS2010-FX-1000ELF RES SMD 100 OHM 1% 1W 2010 6,608 $0.7600 In Stock
CRS1206-FX-33R0ELF RES SMD 33 OHM 1% 1/2W 1206 11,948 $0.4200 In Stock
+ 39 more variants in stock — browse the full category

Technical Parameters

CRS2010-JW-4R7ELF Specifications

Series CRS
Package Tape & Reel (TR)Cut Tape (CT)Digi-Reel®
Part Status Active
Resistance 4.7 Ohms
Tolerance ±5%
Power (Watts) 1W
Composition Thick Film
Features High Voltage, Pulse Withstanding
Temperature Coefficient ±200ppm/°C
Operating Temperature -55°C ~ 155°C
Package / Case 2010 (5025 Metric)
Supplier Device Package 2010
Ratings -
Size / Dimension 0.197" L x 0.098" W (5.00mm x 2.50mm)
Height - Seated (Max) 0.026" (0.65mm)
Number of Terminations 2
Failure Rate -

Buying Guide

Choosing Resistors

When selecting a chip resistor, match four parameters in order of impact: resistance value and tolerance (5% suffices for pulls and straps; 1% or better for precision dividers), power rating (0603 standard is 0.1 W — derate 50% for continuous duty in enclosed assemblies), temperature coefficient (±100~200 ppm/°C typical for thick film; use thin film below ±50 ppm/°C where stability matters), and packaging (tape & reel for automated assembly, cut tape for prototyping). For zero-ohm jumpers, verify the maximum continuous current — most 0603 jumpers handle 1–2 A. In humid or automotive environments, prefer moisture-resistant coatings and AEC-Q200-qualified parts. Higher voltages need larger cases or anti-surge (thick-film surge-resistant) constructions, since arcing and creepage limits scale with package geometry.

Cross-Brand Equivalents

Specs-Comparable Alternatives

Matched on package, key parameters and mounting
Part Number Description Stock Unit Price Match
AS0AJTF4R70 RES 4.7 OHM 5% 3/4W 2010 2,286 RFQ 100%
CRGS2010J4R7 RES SMD 4.7 OHM 5% 3/4W 2010 26,918 $0.1860 100%
AC2010JK-074R7L RES SMD 4.7 OHM 5% 3/4W 2010 10,464 $0.4800 100%
CR024R7J RES SMD 4.7 OHM 5% 3/4W 2010 233,255 $0.0214 100%
CRGCQ2010J4R7 CRGCQ 2010 4R7 5% 17,276 $0.2900 100%
AA2010JK-074R7L RES SMD 4.7 OHM 5% 3/4W 2010 67,555 $0.0741 100%
Alternatives verified in stock at Xinyun IC Verify dielectric and reflow profile against the datasheet before release

Same Manufacturer

J.W. Miller / Bourns Parts in Stock

Request a Quote

Need CRS2010-JW-4R7ELF or an alternative?

Send your quantity — our team replies with pricing and lead time within 24 hours, from franchised channels only.