CRL2010-FW-3R90ELF J.W. Miller / Bourns component image

CRL2010-FW-3R90ELF

In Stock

J.W. Miller / Bourns logo J.W. Miller / Bourns · franchised distributor

RES SMD 3.9 OHM 1% 1/2W 2010

Listed in Chip Resistor - Surface Mount

66,525 pcs in stock ships same day before 6pm

from $0.0718

Quantity Unit Price
1 - 3,999 $0.0752
4,000+ $0.0718 BEST
100% Original Same-Day Ship 180-Day Warranty Worldwide Delivery

Overview

What is the CRL2010-FW-3R90ELF?

CRL2010-FW-3R90ELF is a res smd 3.9 ohm 1% 1/2w 2010, featuring a power rating of 0.5W, 1/2W, a tolerance of ±1%, a Thick Film composition, and the 2010 (5025 Metric) case. Stocked at Xinyun IC — volume pricing and datasheet support available on request.

Same Series

J.W. Miller / Bourns Series Variants in Stock

50+ variants of this series in stock
Part Number Description Stock Unit Price Status
CRL0603-JW-4R30ELF RES SMD 4.3 OHM 5% 1/10W 0603 847 RFQ In Stock
CRL0805-JW-R150ELF RES 0.15 OHM 5% 1/8W 0805 179,570 $0.0279 In Stock
CRL0805-FW-4R75ELF RES SMD 4.75 OHM 1% 1/8W 0805 284,940 $0.0176 In Stock
CRL0603-JW-2R70ELF RES SMD 2.7 OHM 5% 1/10W 0603 951 RFQ In Stock
CRL2512-FW-R300ELF RES 0.3 OHM 1% 1W 2512 20,463 $0.2447 In Stock
CRL0805-JW-4R30ELF RES SMD 4.3 OHM 5% 1/8W 0805 4,748 RFQ In Stock
CRL1206-FW-4R30ELF RES SMD 4.3 OHM 1% 1/4W 1206 270,016 $0.0185 In Stock
CRL2512-FW-2R00ELF RES SMD 2 OHM 1% 1W 2512 7,190 $0.7000 In Stock
CRL0805-FW-3R90ELF RES SMD 3.9 OHM 1% 1/8W 0805 284,936 $0.0176 In Stock
CRL0603-JW-R510ELF RES 0.51 OHM 5% 1/10W 0603 1,462,022 $0.0034 In Stock
More variants of this series in stock — browse the full category

Technical Parameters

CRL2010-FW-3R90ELF Specifications

Series CRL
Package Tape & Reel (TR)
Part Status Last Time Buy
Resistance 3.9 Ohms
Tolerance ±1%
Power (Watts) 0.5W, 1/2W
Composition Thick Film
Features -
Temperature Coefficient ±200ppm/°C
Operating Temperature -55°C ~ 125°C
Package / Case 2010 (5025 Metric)
Supplier Device Package 2010
Ratings -
Size / Dimension 0.197" L x 0.098" W (5.00mm x 2.50mm)
Height - Seated (Max) 0.028" (0.70mm)
Number of Terminations 2
Failure Rate -

Buying Guide

Choosing Resistors

When selecting a chip resistor, match four parameters in order of impact: resistance value and tolerance (5% suffices for pulls and straps; 1% or better for precision dividers), power rating (0603 standard is 0.1 W — derate 50% for continuous duty in enclosed assemblies), temperature coefficient (±100~200 ppm/°C typical for thick film; use thin film below ±50 ppm/°C where stability matters), and packaging (tape & reel for automated assembly, cut tape for prototyping). For zero-ohm jumpers, verify the maximum continuous current — most 0603 jumpers handle 1–2 A. In humid or automotive environments, prefer moisture-resistant coatings and AEC-Q200-qualified parts. Higher voltages need larger cases or anti-surge (thick-film surge-resistant) constructions, since arcing and creepage limits scale with package geometry.

Cross-Brand Equivalents

Specs-Comparable Alternatives

Matched on package, key parameters and mounting
Part Number Description Stock Unit Price Match
CRCW20103R90FKTF RES SMD 3.9 OHM 1% 3/4W 2010 58,008 $0.0863 100%
RMCP2010FT3R90 RES 3.9 OHM 1% 1W 2010 46,042 $0.1087 100%
CRCW20103R90FNEF RES SMD 3.9 OHM 1% 3/4W 2010 95,858 $0.0522 100%
CRCW20103R90FNTF RES SMD 3.9 OHM 1% 3/4W 2010 58,020 $0.0863 100%
ERJ-S1DF3R90U RES 3.9 OHM 1% 3/4W 2010 SMD 38,190 $0.1311 100%
ERJ-U1DF3R90U RES 3.9 OHM 1% 3/4W 2010 SMD 46,911 $0.1067 100%
Alternatives verified in stock at Xinyun IC Verify dielectric and reflow profile against the datasheet before release

Same Manufacturer

J.W. Miller / Bourns Parts in Stock

Request a Quote

Need CRL2010-FW-3R90ELF or an alternative?

Send your quantity — our team replies with pricing and lead time within 24 hours, from franchised channels only.