CR2512-J/-2R2ELF J.W. Miller / Bourns component image

CR2512-J/-2R2ELF

In Stock

J.W. Miller / Bourns logo J.W. Miller / Bourns · franchised distributor

RES SMD 2.2 OHM 5% 1W 2512

Listed in Chip Resistor - Surface Mount

13,189 pcs in stock ships same day before 6pm

from $0.0778

Quantity Unit Price
1 - 3,999 $0.3800
4,000+ $0.0778 BEST
100% Original Same-Day Ship 180-Day Warranty Worldwide Delivery

Overview

What is the CR2512-J/-2R2ELF?

CR2512-J--2R2ELF is a res smd 2.2 ohm 5% 1w 2512, featuring a power rating of 1W, a tolerance of ±5%, a Thick Film composition, and the 2512 (6432 Metric) case. Stocked at Xinyun IC — volume pricing and datasheet support available on request.

Same Series

J.W. Miller / Bourns Series Variants in Stock

50+ variants of this series in stock
Part Number Description Stock Unit Price Status
CR2512-FX-7500ELF RES SMD 750 OHM 1% 1W 2512 60,434 $0.0828 In Stock
CR2512-FX-1100ELF RES SMD 110 OHM 1% 1W 2512 60,424 $0.0828 In Stock
CR2512-JW-470ELF RES SMD 47 OHM 5% 1W 2512 103,998 $0.0481 In Stock
CR2512-FX-2210ELF RES SMD 221 OHM 1% 1W 2512 60,417 $0.0828 In Stock
CR2512-JW-272ELF RES SMD 2.7K OHM 5% 1W 2512 99,462 $0.0503 In Stock
CR2512-JW-390ELF RES SMD 39 OHM 5% 1W 2512 99,472 $0.0503 In Stock
CR2512-JW-122ELF RES SMD 1.2K OHM 5% 1W 2512 99,459 $0.0503 In Stock
CR2512-FX-90R9ELF RES SMD 90.9 OHM 1% 1W 2512 60,434 $0.0828 In Stock
CR2512-JW-101ELF RES SMD 100 OHM 5% 1W 2512 12,548 $0.4000 In Stock
CR2512-FX-1000ELF RES SMD 100 OHM 1% 1W 2512 63,175 $0.0792 In Stock
More variants of this series in stock — browse the full category

Technical Parameters

CR2512-J/-2R2ELF Specifications

Series CR2512
Package Tape & Reel (TR)Cut Tape (CT)Digi-Reel®
Part Status Active
Resistance 2.2 Ohms
Tolerance ±5%
Power (Watts) 1W
Composition Thick Film
Features -
Temperature Coefficient -
Operating Temperature -55°C ~ 155°C
Package / Case 2512 (6432 Metric)
Supplier Device Package 2512
Ratings -
Size / Dimension 0.248" L x 0.122" W (6.30mm x 3.10mm)
Height - Seated (Max) 0.030" (0.75mm)
Number of Terminations 2
Failure Rate -

Buying Guide

Choosing Resistors

When selecting a chip resistor, match four parameters in order of impact: resistance value and tolerance (5% suffices for pulls and straps; 1% or better for precision dividers), power rating (0603 standard is 0.1 W — derate 50% for continuous duty in enclosed assemblies), temperature coefficient (±100~200 ppm/°C typical for thick film; use thin film below ±50 ppm/°C where stability matters), and packaging (tape & reel for automated assembly, cut tape for prototyping). For zero-ohm jumpers, verify the maximum continuous current — most 0603 jumpers handle 1–2 A. In humid or automotive environments, prefer moisture-resistant coatings and AEC-Q200-qualified parts. Higher voltages need larger cases or anti-surge (thick-film surge-resistant) constructions, since arcing and creepage limits scale with package geometry.

Cross-Brand Equivalents

Specs-Comparable Alternatives

Matched on package, key parameters and mounting
Part Number Description Stock Unit Price Match
CR2512-J/-2R4ELF RES SMD 2.4 OHM 5% 1W 2512 3,022 RFQ 95%
CR2512-J/-3R0ELF RES SMD 3 OHM 5% 1W 2512 99,464 $0.0503 81%
CR2512-J/-1R5ELF RES SMD 1.5 OHM 5% 1W 2512 99,455 $0.0503 77%
CR2512-J/-3R3ELF RES SMD 3.3 OHM 5% 1W 2512 99,454 $0.0503 76%
CR2512-J/-1R2ELF RES SMD 1.2 OHM 5% 1W 2512 99,470 $0.0503 64%
Alternatives verified in stock at Xinyun IC Verify dielectric and reflow profile against the datasheet before release

Same Manufacturer

J.W. Miller / Bourns Parts in Stock

Request a Quote

Need CR2512-J/-2R2ELF or an alternative?

Send your quantity — our team replies with pricing and lead time within 24 hours, from franchised channels only.