CR2010-FW-R050ELF J.W. Miller / Bourns component image

CR2010-FW-R050ELF

In Stock

J.W. Miller / Bourns logo J.W. Miller / Bourns · franchised distributor

RES 0.05 OHM 1% 1/2W 2010

Listed in Chip Resistor - Surface Mount

3,073 pcs in stock ships same day before 6pm

RFQ for pricing — volume discounts available for this part.

100% Original Same-Day Ship 180-Day Warranty Worldwide Delivery

Overview

What is the CR2010-FW-R050ELF?

CR2010-FW-R050ELF is a res 0.05 ohm 1% 1/2w 2010, featuring a power rating of 0.5W, 1/2W, a tolerance of ±1%, a Thick Film composition, and the 2010 (5025 Metric) case. Stocked at Xinyun IC — volume pricing and datasheet support available on request.

Same Series

J.W. Miller / Bourns Series Variants in Stock

50+ variants of this series in stock
Part Number Description Stock Unit Price Status
CR0402-FX-3301GLF RES SMD 3.3K OHM 1% 1/16W 0402 50,030 $0.1000 In Stock
CR1206-FX-1473ELF RES SMD 147K OHM 1% 1/4W 1206 575,422 $0.0087 In Stock
CR0603-FX-1073ELF RES SMD 107K OHM 1% 1/10W 0603 1,567,444 $0.0032 In Stock
CR0402-FX-4700GLF RES SMD 470 OHM 1% 1/16W 0402 50,036 $0.1000 In Stock
CR1206-FX-3653ELF RES SMD 365K OHM 1% 1/4W 1206 600,994 $0.0083 In Stock
CR1206-FX-2552ELF RES SMD 25.5K OHM 1% 1/4W 1206 575,415 $0.0087 In Stock
CR0603-FX-8450ELF RES SMD 845 OHM 1% 1/10W 0603 1,497,037 $0.0033 In Stock
CR0603-J/-1R5ELF RES SMD 1.5 OHM 5% 1/10W 0603 50,044 $0.1000 In Stock
CR0402-FX-6623GLF RES SMD 662K OHM 1% 1/16W 0402 1,111,150 $0.0045 In Stock
CR0805-FX-7501GLF RES SMD 7.5K OHM 1% 1/8W 0805 1,388 RFQ In Stock
More variants of this series in stock — browse the full category

Technical Parameters

CR2010-FW-R050ELF Specifications

Series CR2010
Package Tape & Reel (TR)
Part Status Active
Resistance 50 mOhms
Tolerance ±1%
Power (Watts) 0.5W, 1/2W
Composition Thick Film
Features -
Temperature Coefficient ±200ppm/°C
Operating Temperature -55°C ~ 155°C
Package / Case 2010 (5025 Metric)
Supplier Device Package 2010
Ratings -
Size / Dimension 0.197" L x 0.098" W (5.00mm x 2.50mm)
Height - Seated (Max) 0.028" (0.70mm)
Number of Terminations 2
Failure Rate -

Buying Guide

Choosing Resistors

When selecting a chip resistor, match four parameters in order of impact: resistance value and tolerance (5% suffices for pulls and straps; 1% or better for precision dividers), power rating (0603 standard is 0.1 W — derate 50% for continuous duty in enclosed assemblies), temperature coefficient (±100~200 ppm/°C typical for thick film; use thin film below ±50 ppm/°C where stability matters), and packaging (tape & reel for automated assembly, cut tape for prototyping). For zero-ohm jumpers, verify the maximum continuous current — most 0603 jumpers handle 1–2 A. In humid or automotive environments, prefer moisture-resistant coatings and AEC-Q200-qualified parts. Higher voltages need larger cases or anti-surge (thick-film surge-resistant) constructions, since arcing and creepage limits scale with package geometry.

Cross-Brand Equivalents

Specs-Comparable Alternatives

Matched on package, key parameters and mounting
Part Number Description Stock Unit Price Match
CRM2010-FX-R050ELF RES 0.05 OHM 1% 1W 2010 14,894 $0.3365 100%
ERJ-L1DKF50MU RES 0.05 OHM 1% 1/2W 2010 27,817 $0.1800 100%
RCWE201050L0FNEA RES 0.05 OHM 1% 1W 2010 7,276 $0.6900 100%
RCWE201051L0FKEA RES 0.051 OHM 1% 1W 2010 23,859 $0.2100 98%
ERJ-L1DUF51MU RES 0.051 OHM 1% 1/2W 2010 20,791 $0.2408 98%
SR732HTTE51LJ CURRENT SENSE RESISTOR 19,318 $0.2594 61%
Alternatives verified in stock at Xinyun IC Verify dielectric and reflow profile against the datasheet before release

Same Manufacturer

J.W. Miller / Bourns Parts in Stock

Request a Quote

Need CR2010-FW-R050ELF or an alternative?

Send your quantity — our team replies with pricing and lead time within 24 hours, from franchised channels only.