CR2010-F/-2R70ELF J.W. Miller / Bourns component image

CR2010-F/-2R70ELF

In Stock

J.W. Miller / Bourns logo J.W. Miller / Bourns · franchised distributor

RES SMD 2.7 OHM 1% 1/2W 2010

Listed in Chip Resistor - Surface Mount

906 pcs in stock ships same day before 6pm

RFQ for pricing — volume discounts available for this part.

100% Original Same-Day Ship 180-Day Warranty Worldwide Delivery

Overview

What is the CR2010-F/-2R70ELF?

CR2010-F--2R70ELF is a res smd 2.7 ohm 1% 1/2w 2010, featuring a power rating of 0.5W, 1/2W, a tolerance of ±1%, a Thick Film composition, and the 2010 (5025 Metric) case. Available from Xinyun IC with immediate dispatch and a 180-day warranty.

Same Series

J.W. Miller / Bourns Series Variants in Stock

50+ variants of this series in stock
Part Number Description Stock Unit Price Status
CR1206-F/-3R90ELF RES SMD 3.9 OHM 1% 1/4W 1206 575,421 $0.0087 In Stock
CR0603-F/-7R50ELF RES SMD 7.5 OHM 1% 1/10W 0603 4,565 RFQ In Stock
CR0603-F/-2R70ELF RES SMD 2.7 OHM 1% 1/10W 0603 2,673 RFQ In Stock
CR2512-F/-9R10ELF RES SMD 9.1 OHM 1% 1W 2512 4,011 RFQ In Stock
CR2010-F/-1R20ELF RES SMD 1.2 OHM 1% 1/2W 2010 2,313 RFQ In Stock
CR2010-F/-6R80ELF RES SMD 6.8 OHM 1% 1/2W 2010 3,623 RFQ In Stock
CR0603-F/-3R00ELF RES SMD 3 OHM 1% 1/10W 0603 2,537 RFQ In Stock
CR2512-F/-1R20ELF RES SMD 1.2 OHM 1% 1W 2512 4,739 RFQ In Stock
CR2010-F/-2R00ELF RES SMD 2 OHM 1% 1/2W 2010 4,123 RFQ In Stock
CR1206-F/-4R99ELF RES SMD 4.99 OHM 1% 1/4W 1206 1,604 RFQ In Stock
More variants of this series in stock — browse the full category

Technical Parameters

CR2010-F/-2R70ELF Specifications

Series CR
Package Tape & Reel (TR)
Part Status Active
Resistance 2.7 Ohms
Tolerance ±1%
Power (Watts) 0.5W, 1/2W
Composition Thick Film
Features -
Temperature Coefficient ±200ppm/°C
Operating Temperature -55°C ~ 155°C
Package / Case 2010 (5025 Metric)
Supplier Device Package 2010
Ratings -
Size / Dimension 0.197" L x 0.098" W (5.00mm x 2.50mm)
Height - Seated (Max) 0.028" (0.70mm)
Number of Terminations 2
Failure Rate -

Buying Guide

Choosing Resistors

When selecting a chip resistor, match four parameters in order of impact: resistance value and tolerance (5% suffices for pulls and straps; 1% or better for precision dividers), power rating (0603 standard is 0.1 W — derate 50% for continuous duty in enclosed assemblies), temperature coefficient (±100~200 ppm/°C typical for thick film; use thin film below ±50 ppm/°C where stability matters), and packaging (tape & reel for automated assembly, cut tape for prototyping). For zero-ohm jumpers, verify the maximum continuous current — most 0603 jumpers handle 1–2 A. In humid or automotive environments, prefer moisture-resistant coatings and AEC-Q200-qualified parts. Higher voltages need larger cases or anti-surge (thick-film surge-resistant) constructions, since arcing and creepage limits scale with package geometry.

Cross-Brand Equivalents

Specs-Comparable Alternatives

Matched on package, key parameters and mounting
Part Number Description Stock Unit Price Match
CRCW20102R70FNTF RES SMD 2.7 OHM 1% 3/4W 2010 58,019 $0.0863 100%
RMCP2010FT2R70 RES 2.7 OHM 1% 1W 2010 46,054 $0.1087 100%
CRCW20102R70FKEFHP RES SMD 2.7 OHM 1% 1W 2010 30,073 $0.1664 100%
ERJ-12ZYJ2R7U RES SMD 2.7 OHM 5% 3/4W 2010 17,899 $0.2800 63%
RMCF2010JT2R70 RES 2.7 OHM 5% 3/4W 2010 22,775 $0.2200 63%
CRCW20102R70JNTF RES SMD 2.7 OHM 5% 3/4W 2010 72,493 $0.0690 63%
Alternatives verified in stock at Xinyun IC Verify dielectric and reflow profile against the datasheet before release

Same Manufacturer

J.W. Miller / Bourns Parts in Stock

Request a Quote

Need CR2010-F/-2R70ELF or an alternative?

Send your quantity — our team replies with pricing and lead time within 24 hours, from franchised channels only.