CR1206AF/-2R20EAS J.W. Miller / Bourns component image

CR1206AF/-2R20EAS

In Stock

J.W. Miller / Bourns logo J.W. Miller / Bourns · franchised distributor

RESA-AS 1206 2R2 1% 250MW TC400

Listed in Chip Resistor - Surface Mount

38,507 pcs in stock ships same day before 6pm

from $0.1300

Quantity Unit Price
1+ $0.1300 BEST
100% Original Same-Day Ship 180-Day Warranty Worldwide Delivery

Overview

What is the CR1206AF/-2R20EAS?

CR1206AF--2R20EAS is a resa-as 1206 2r2 1% 250mw tc400, featuring a power rating of 0.25W, 1/4W, a tolerance of ±1%, a Thick Film composition, and the 1206 (3216 Metric) case. Stocked at Xinyun IC — volume pricing and datasheet support available on request.

Same Series

J.W. Miller / Bourns Series Variants in Stock

50+ variants of this series in stock
Part Number Description Stock Unit Price Status
CR0603AFX-2703EAS RES SMD 270K OHM 1% 0603 673 RFQ In Stock
CR0402AFX-8202GAS RES SMD 82K OHM 1% 0402 758 RFQ In Stock
CR1206AJ/-000EAS RESA-AS 1206 0R JUMPER 250MW 41,701 $0.1200 In Stock
CR0402AFX-3302GAS RES SMD 33K OHM 1% 0402 4,507 RFQ In Stock
CR0402AFX-1003GAS RES SMD 100K OHM 1% 0402 4,068 RFQ In Stock
CR0402AFX-2002GAS RES SMD 20K OHM 1% 0402 2,010 RFQ In Stock
CR1206AFX-4753EAS RESA-AS 1206 475K 1% 250MW TC100 38,495 $0.1300 In Stock
CR0805AFX-1003EAS RESA-AS 0805 100K 1% 125MW TC100 50,040 $0.1000 In Stock
CR0402AFX-4702GAS RES SMD 47K OHM 1% 0402 614 RFQ In Stock
CR0201AFW-1002GAS RESA-AS 0201 10K 1% 50MW TC200 50,037 $0.1000 In Stock
More variants of this series in stock — browse the full category

Technical Parameters

CR1206AF/-2R20EAS Specifications

Series CR1206A-AS
Package Tape & Reel (TR)Cut Tape (CT)Digi-Reel®
Part Status Active
Resistance 2.2 Ohms
Tolerance ±1%
Power (Watts) 0.25W, 1/4W
Composition Thick Film
Features Anti-Sulfur, Automotive AEC-Q200, Moisture Resistant
Temperature Coefficient ±400ppm/°C
Operating Temperature -55°C ~ 155°C
Package / Case 1206 (3216 Metric)
Supplier Device Package 1206
Ratings AEC-Q200
Size / Dimension 0.122" L x 0.061" W (3.10mm x 1.55mm)
Height - Seated (Max) 0.026" (0.65mm)
Number of Terminations 2
Failure Rate -

Buying Guide

Choosing Resistors

When selecting a chip resistor, match four parameters in order of impact: resistance value and tolerance (5% suffices for pulls and straps; 1% or better for precision dividers), power rating (0603 standard is 0.1 W — derate 50% for continuous duty in enclosed assemblies), temperature coefficient (±100~200 ppm/°C typical for thick film; use thin film below ±50 ppm/°C where stability matters), and packaging (tape & reel for automated assembly, cut tape for prototyping). For zero-ohm jumpers, verify the maximum continuous current — most 0603 jumpers handle 1–2 A. In humid or automotive environments, prefer moisture-resistant coatings and AEC-Q200-qualified parts. Higher voltages need larger cases or anti-surge (thick-film surge-resistant) constructions, since arcing and creepage limits scale with package geometry.

Cross-Brand Equivalents

Specs-Comparable Alternatives

Matched on package, key parameters and mounting
Part Number Description Stock Unit Price Match
CRG1206F2R2 RES SMD 2.2 OHM 1% 1/4W 1206 218,758 $0.0229 100%
CR1206-F/-2R20ELF RES SMD 2.2 OHM 1% 1/4W 1206 3,568 RFQ 100%
RM12F2R20CT RES SMD 2.2 OHM 1% 1/4W 1206 500,032 $0.0100 100%
PWR06FTFU2R21 RES 2.21 OHM 1% 1/2W 1206 1,016 RFQ 100%
CR1206-F/-2R21ELF RES SMD 2.21 OHM 1% 1/4W 1206 3,965 RFQ 100%
CR-06FL7--2R37 RES 2.37 OHM 1% 1/4W 1206 3,635 RFQ 93%
Alternatives verified in stock at Xinyun IC Verify dielectric and reflow profile against the datasheet before release

Same Manufacturer

J.W. Miller / Bourns Parts in Stock

Request a Quote

Need CR1206AF/-2R20EAS or an alternative?

Send your quantity — our team replies with pricing and lead time within 24 hours, from franchised channels only.