CR1206-F/-2R00ELF J.W. Miller / Bourns component image

CR1206-F/-2R00ELF

In Stock

J.W. Miller / Bourns logo J.W. Miller / Bourns · franchised distributor

RES SMD 2 OHM 1% 1/4W 1206

Listed in Chip Resistor - Surface Mount

50,038 pcs in stock ships same day before 6pm

from $0.1000

Quantity Unit Price
1+ $0.1000 BEST
100% Original Same-Day Ship 180-Day Warranty Worldwide Delivery

Overview

What is the CR1206-F/-2R00ELF?

CR1206-F--2R00ELF is a res smd 2 ohm 1% 1/4w 1206, featuring a power rating of 0.25W, 1/4W, a tolerance of ±1%, a Thick Film composition, and the 1206 (3216 Metric) case. Stocked at Xinyun IC — volume pricing and datasheet support available on request.

Same Series

J.W. Miller / Bourns Series Variants in Stock

50+ variants of this series in stock
Part Number Description Stock Unit Price Status
CR1206-F/-3R90ELF RES SMD 3.9 OHM 1% 1/4W 1206 575,421 $0.0087 In Stock
CR0603-F/-7R50ELF RES SMD 7.5 OHM 1% 1/10W 0603 4,565 RFQ In Stock
CR0603-F/-2R70ELF RES SMD 2.7 OHM 1% 1/10W 0603 2,673 RFQ In Stock
CR2512-F/-9R10ELF RES SMD 9.1 OHM 1% 1W 2512 4,011 RFQ In Stock
CR2010-F/-1R20ELF RES SMD 1.2 OHM 1% 1/2W 2010 2,313 RFQ In Stock
CR2010-F/-6R80ELF RES SMD 6.8 OHM 1% 1/2W 2010 3,623 RFQ In Stock
CR0603-F/-3R00ELF RES SMD 3 OHM 1% 1/10W 0603 2,537 RFQ In Stock
CR2512-F/-1R20ELF RES SMD 1.2 OHM 1% 1W 2512 4,739 RFQ In Stock
CR2010-F/-2R00ELF RES SMD 2 OHM 1% 1/2W 2010 4,123 RFQ In Stock
CR1206-F/-4R99ELF RES SMD 4.99 OHM 1% 1/4W 1206 1,604 RFQ In Stock
More variants of this series in stock — browse the full category

Technical Parameters

CR1206-F/-2R00ELF Specifications

Series CR
Package Tape & Reel (TR)Cut Tape (CT)Digi-Reel®
Part Status Active
Resistance 2 Ohms
Tolerance ±1%
Power (Watts) 0.25W, 1/4W
Composition Thick Film
Features -
Temperature Coefficient ±200ppm/°C
Operating Temperature -55°C ~ 155°C
Package / Case 1206 (3216 Metric)
Supplier Device Package 1206
Ratings -
Size / Dimension 0.122" L x 0.061" W (3.10mm x 1.55mm)
Height - Seated (Max) 0.026" (0.65mm)
Number of Terminations 2
Failure Rate -

Buying Guide

Choosing Resistors

When selecting a chip resistor, match four parameters in order of impact: resistance value and tolerance (5% suffices for pulls and straps; 1% or better for precision dividers), power rating (0603 standard is 0.1 W — derate 50% for continuous duty in enclosed assemblies), temperature coefficient (±100~200 ppm/°C typical for thick film; use thin film below ±50 ppm/°C where stability matters), and packaging (tape & reel for automated assembly, cut tape for prototyping). For zero-ohm jumpers, verify the maximum continuous current — most 0603 jumpers handle 1–2 A. In humid or automotive environments, prefer moisture-resistant coatings and AEC-Q200-qualified parts. Higher voltages need larger cases or anti-surge (thick-film surge-resistant) constructions, since arcing and creepage limits scale with package geometry.

Cross-Brand Equivalents

Specs-Comparable Alternatives

Matched on package, key parameters and mounting
Part Number Description Stock Unit Price Match
AS06FTF0020 RES 2 OHM 1% 1/4W 1206 1,834 RFQ 100%
RMCS1206FT2R00 RES 2 OHM 1% 1/4W 1206 319,730 $0.0156 100%
RM12F2R00CT RES SMD 2 OHM 1% 1/4W 1206 500,045 $0.0100 100%
CR-06FL7--1R96 RES 1.96 OHM 1% 1/4W 1206 3,133 RFQ 98%
RMCS1206FT2R05 RES 2.05 OHM 1% 1/4W 1206 319,730 $0.0156 98%
CR-06FL7--1R91 RES 1.91 OHM 1% 1/4W 1206 2,924 RFQ 96%
Alternatives verified in stock at Xinyun IC Verify dielectric and reflow profile against the datasheet before release

Same Manufacturer

J.W. Miller / Bourns Parts in Stock

Request a Quote

Need CR1206-F/-2R00ELF or an alternative?

Send your quantity — our team replies with pricing and lead time within 24 hours, from franchised channels only.