CC2640R2FRSMT Texas Instruments component image

CC2640R2FRSMT

In Stock

Texas Instruments logo Texas Instruments · franchised distributor

IC RF TXRX+MCU BLE 5.1 32VQFN

Listed in RF Transceiver ICs

1,077 pcs in stock ships same day before 6pm

from $2.5508

Quantity Unit Price
1 - 249 $4.8000
250 - 499 $3.3707
500 - 749 $3.0245
750 - 1,249 $2.7330
1,250+ $2.5508 BEST
100% Original Same-Day Ship 180-Day Warranty Worldwide Delivery

Overview

What is the CC2640R2FRSMT?

CC2640R2FRSMT is a ic rf txrx+mcu ble 5.1 32vqfn, featuring a frequency of 2.4GHz, the 32-VFQFN Exposed Pad case. Stocked at Xinyun IC — volume pricing and datasheet support available on request.

Same Series

Texas Instruments Series Variants in Stock

8 variants of this series in stock
Part Number Description Stock Unit Price Status
CC2640R2FRHBT IC RF TXRX+MCU BLE 5.1 32VQFN 1,075 $4.8000 In Stock
CC2640R2FRGZT IC RF TXRX+MCU BLE 5.1 48VQFN 1,027 $5.0800 In Stock
CC2640R2FYFVR IC RF TXRX+MCU BLE 5.1 34DSBGA 1,099 $4.7400 In Stock
CC2640R2FRGZR IC RF TXRX+MCU BLUETOOTH 48VFQFN 1,156 $4.4500 In Stock
CC2640R2FRHBR IC RF TXRX+MCU BLUETOOTH 32VFQFN 1,245 $4.1700 In Stock
CC2640R2FRSMR IC RF TXRX+MCU BLUETOOTH 32VFQFN 1,234 $4.1700 In Stock
CC2640R2FYFVT IC RF TXRX+MCU BLE 5.1 34DSBGA 1,059 $4.9400 In Stock
+ 1 more variants in stock — browse the full category

Technical Parameters

CC2640R2FRSMT Specifications

Series SimpleLink™
Package Tape & Reel (TR)Cut Tape (CT)Digi-Reel®
Part Status Active
Type TxRx + MCU
RF Family/Standard Bluetooth
Protocol Bluetooth v5.1
Modulation FSK
Frequency 2.4GHz
Data Rate (Max) 2Mbps
Power - Output 5dBm
Sensitivity -97dBm
Memory Size 128kB Flash, 20kB RAM
Serial Interfaces I²C, I²S, SPI, UART
GPIO 10
Voltage - Supply 1.8V ~ 3.8V
Current - Receiving 5.9mA
Current - Transmitting 9.1mA
Operating Temperature -40°C ~ 85°C
Mounting Type Surface Mount
Package / Case 32-VFQFN Exposed Pad
Supplier Device Package 32-VQFN (4x4)

Buying Guide

Choosing RF/IF and RFID

RF component selection lives and dies by the frequency-conditioned numbers. Judge filters by insertion loss and return loss at the band edges, not center; check passband ripple for modulation-sensitive links. Baluns must cover the full band with amplitude balance ±0.5 dB and phase ±5° or your modulation quality (EVM) degrades. For amplifiers, distinguish small-signal gain from compression: back off 8–10 dB from P1dB for linear modulation, more for high-order QAM. Verify 50 Ω match assumptions — antenna ports and differential chains need their matching networks at design frequency. Finally, respect PCB layout as part of the component: ground vias, pad geometry and trace length all sit inside the signal path above ~1 GHz; datasheet evaluation-board layouts are the safest reference.

Cross-Brand Equivalents

Specs-Comparable Alternatives

Matched on package, key parameters and mounting
Part Number Description Stock Unit Price Match
CC2640R2FRHBT IC RF TXRX+MCU BLE 5.1 32VQFN 1,075 $4.8000 100%
Alternatives verified in stock at Xinyun IC Verify dielectric and reflow profile against the datasheet before release

Same Manufacturer

Texas Instruments Parts in Stock

Request a Quote

Need CC2640R2FRSMT or an alternative?

Send your quantity — our team replies with pricing and lead time within 24 hours, from franchised channels only.