CC1352P1F3RGZR Texas Instruments component image

CC1352P1F3RGZR

In Stock

Texas Instruments logo Texas Instruments · franchised distributor

IC RF TXRX+MCU BLE 5.1 48VQFN

Listed in RF Transceiver ICs

648 pcs in stock ships same day before 6pm

from $8.1600

Quantity Unit Price
1+ $8.1600 BEST
100% Original Same-Day Ship 180-Day Warranty Worldwide Delivery

Overview

What is the CC1352P1F3RGZR?

CC1352P1F3RGZR is a ic rf txrx+mcu ble 5.1 48vqfn, featuring a frequency of 143MHz ~ 176MHz, 287MHz ~ 351MHz, 359MHz ~ 527MHz, 861MHz ~ 1.054GHz, 1.076GHz ~ 1.315GHz, 2.36GHz ~ 2.5GHz, the 48-VFQFN Exposed Pad case. Available from Xinyun IC with immediate dispatch and a 180-day warranty.

Same Series

Texas Instruments Series Variants in Stock

2 variants of this series in stock
Part Number Description Stock Unit Price Status
CC1352R1F3RGZR IC RF TXRX+MCU BLE 5.1 48VQFN 686 $7.8000 In Stock
+ 1 more variants in stock — browse the full category

Technical Parameters

CC1352P1F3RGZR Specifications

Series SimpleLink™
Package Tape & Reel (TR)Cut Tape (CT)Digi-Reel®
Part Status Active
Type TxRx + MCU
RF Family/Standard 802.15.4, Bluetooth
Protocol 6LoWPAN, Bluetooth v5.1, Thread, Zigbee®
Modulation DSSS, GFSK, O-QPSK
Frequency 143MHz ~ 176MHz, 287MHz ~ 351MHz, 359MHz ~ 527MHz, 861MHz ~ 1.054GHz, 1.076GHz ~ 1.315GHz, 2.36GHz ~ 2.5GHz
Data Rate (Max) 2Mbps
Power - Output 20dBm
Sensitivity -122dBm
Memory Size 352kB Flash, 80kB SRAM
Serial Interfaces ADC, GPIO, I²C, I²S, SPI, UART
GPIO 26
Voltage - Supply 1.8V ~ 3.8V
Current - Receiving 5.8mA
Current - Transmitting 63mA ~ 79mA
Operating Temperature -40°C ~ 85°C (TA)
Mounting Type Surface Mount
Package / Case 48-VFQFN Exposed Pad
Supplier Device Package 48-VQFN (7x7)

Buying Guide

Choosing RF/IF and RFID

RF component selection lives and dies by the frequency-conditioned numbers. Judge filters by insertion loss and return loss at the band edges, not center; check passband ripple for modulation-sensitive links. Baluns must cover the full band with amplitude balance ±0.5 dB and phase ±5° or your modulation quality (EVM) degrades. For amplifiers, distinguish small-signal gain from compression: back off 8–10 dB from P1dB for linear modulation, more for high-order QAM. Verify 50 Ω match assumptions — antenna ports and differential chains need their matching networks at design frequency. Finally, respect PCB layout as part of the component: ground vias, pad geometry and trace length all sit inside the signal path above ~1 GHz; datasheet evaluation-board layouts are the safest reference.

Same Manufacturer

Texas Instruments Parts in Stock

Request a Quote

Need CC1352P1F3RGZR or an alternative?

Send your quantity — our team replies with pricing and lead time within 24 hours, from franchised channels only.