CC1110F32RSPG3 Texas Instruments component image

CC1110F32RSPG3

In Stock

Texas Instruments logo Texas Instruments · franchised distributor

IC RF TXRX+MCU ISM<1GHZ 36QFN

Listed in RF Transceiver ICs

2,682 pcs in stock ships same day before 6pm

RFQ for pricing — volume discounts available for this part.

100% Original Same-Day Ship 180-Day Warranty Worldwide Delivery

Overview

What is the CC1110F32RSPG3?

CC1110F32RSPG3 is a ic rf txrx+mcu ism<1ghz 36qfn, featuring a frequency of 300MHz ~ 348MHz, 391MHz ~ 464MHz, 782MHz ~ 928MHz, the 36-VFQFN Exposed Pad case. Available from Xinyun IC with immediate dispatch and a 180-day warranty.

Same Series

Texas Instruments Series Variants in Stock

7 variants of this series in stock
Part Number Description Stock Unit Price Status
CC1111EMK868-915 KIT EVAL MODULE FOR CC1111 88 $90.0000 In Stock
CC1110F8RHHT IC RF TXRX+MCU ISM<1GHZ 36-VFQFN 930 $5.6000 In Stock
CC1110F8RHHR IC RF TXRX+MCU ISM<1GHZ 36-VFQFN 1,062 $4.8700 In Stock
CC1110F32RHHT IC RF TXRX+MCU ISM<1GHZ 36-VFQFN 863 $6.0200 In Stock
CC1111F32RSPR IC RF TXRX+MCU ISM<1GHZ 36-VFQFN 870 $6.0900 In Stock
CC1111F8RSP IC RF TXRX+MCU ISM<1GHZ 36-VFQFN 1,223 $4.2368 In Stock
+ 1 more variants in stock — browse the full category

Technical Parameters

CC1110F32RSPG3 Specifications

Series -
Package Tray
Part Status Discontinued at Digi-Key
Type TxRx + MCU
RF Family/Standard General ISM < 1GHz
Protocol -
Modulation 2FSK, ASK, GFSK, MSK, OOK
Frequency 300MHz ~ 348MHz, 391MHz ~ 464MHz, 782MHz ~ 928MHz
Data Rate (Max) 500kBaud
Power - Output 10dBm
Sensitivity -112dBm
Memory Size 32kB Flash, 4kB SRAM
Serial Interfaces I²S, USART
GPIO 21
Voltage - Supply 2V ~ 3.6V
Current - Receiving 16.2mA ~ 21.5mA
Current - Transmitting 18mA ~ 36.2mA
Operating Temperature -40°C ~ 85°C
Mounting Type Surface Mount
Package / Case 36-VFQFN Exposed Pad
Supplier Device Package 36-VQFN (6x6)

Buying Guide

Choosing RF/IF and RFID

RF component selection lives and dies by the frequency-conditioned numbers. Judge filters by insertion loss and return loss at the band edges, not center; check passband ripple for modulation-sensitive links. Baluns must cover the full band with amplitude balance ±0.5 dB and phase ±5° or your modulation quality (EVM) degrades. For amplifiers, distinguish small-signal gain from compression: back off 8–10 dB from P1dB for linear modulation, more for high-order QAM. Verify 50 Ω match assumptions — antenna ports and differential chains need their matching networks at design frequency. Finally, respect PCB layout as part of the component: ground vias, pad geometry and trace length all sit inside the signal path above ~1 GHz; datasheet evaluation-board layouts are the safest reference.

Cross-Brand Equivalents

Specs-Comparable Alternatives

Matched on package, key parameters and mounting
Part Number Description Stock Unit Price Match
HPA00403RHHR IC RF TXRX+MCU ISM&lt;1GHZ 36VFQFN 983 $5.2900 100%
CC1110F32RHHR CC1110-CC1111 SUB-1 GHZ WIRELESS 1,827 $2.8000 100%
CC1110F32RHHT IC RF TXRX+MCU ISM&lt;1GHZ 36-VFQFN 863 $6.0200 100%
CC1111F32RSP CC1110-CC1111 SUB-1 GHZ WIRELESS 1,176 $4.3600 96%
CC1111F32RSPR IC RF TXRX+MCU ISM&lt;1GHZ 36-VFQFN 870 $6.0900 96%
Alternatives verified in stock at Xinyun IC Verify dielectric and reflow profile against the datasheet before release

Same Manufacturer

Texas Instruments Parts in Stock

Request a Quote

Need CC1110F32RSPG3 or an alternative?

Send your quantity — our team replies with pricing and lead time within 24 hours, from franchised channels only.