CAT5111YI-50-T3 Sanyo Semiconductor/ON Semiconductor component image

CAT5111YI-50-T3

In Stock

Sanyo Semiconductor/ON Semiconductor logo Sanyo Semiconductor/ON Semiconductor · franchised distributor

IC DGTL POT INTERFACE 8TSSOP

Listed in Data Acquisition - Digital Potentiometers

4,848 pcs in stock ships same day before 6pm

RFQ for pricing — volume discounts available for this part.

100% Original Same-Day Ship 180-Day Warranty Worldwide Delivery

Overview

What is the CAT5111YI-50-T3?

CAT5111YI-50-T3 is a ic dgtl pot interface 8tssop, featuring the 8-TSSOP (0.173", 4.40mm Width) package, Surface Mount mounting, a supply range of 2.5V ~ 6V. Available from Xinyun IC with immediate dispatch and a 180-day warranty.

Same Series

Sanyo Semiconductor/ON Semiconductor Series Variants in Stock

10 variants of this series in stock
Part Number Description Stock Unit Price Status
CAT5111VI-50-T3 IC DGTL POT INTERFACE 8SOIC 888 RFQ In Stock
CAT5111VI-00-T3 IC DGTL POT INTERFACE 8SOIC 1,199 RFQ In Stock
CAT5111VI10 IC DGTL POT INTERFACE 8SOIC 4,454 RFQ In Stock
CAT5111YI-00-T3 IC DGTL POT INTERFACE 8TSSOP 3,015 RFQ In Stock
CAT5111YI-10-T3 IC DGTL POT INTERFACE 8TSSOP 4,521 RFQ In Stock
CAT5111YI00 IC DGTL POT INTERFACE 8TSSOP 3,227 RFQ In Stock
CAT5111LI50 IC DGTL POT INTERFACE 8DIP 2,979 RFQ In Stock
CAT5111VI00 IC DGTL POT INTERFACE 8SOIC 3,674 RFQ In Stock
CAT5111VI50 IC DGTL POT INTERFACE 8SOIC 3,736 RFQ In Stock
+ 1 more variants in stock — browse the full category

Technical Parameters

CAT5111YI-50-T3 Specifications

Series CAT5111
Package Tape & Reel (TR)
Part Status Obsolete
Taper Linear
Configuration Potentiometer
Number of Circuits 1
Number of Taps 100
Resistance (Ohms) 50k
Interface Up/Down (U/D, INC, CS)
Memory Type Non-Volatile
Voltage - Supply 2.5V ~ 6V
Features -
Tolerance ±20%
Temperature Coefficient (Typ) 300ppm/°C
Mounting Type Surface Mount
Supplier Device Package 8-TSSOP
Package / Case 8-TSSOP (0.173", 4.40mm Width)
Operating Temperature -40°C ~ 85°C
Resistance - Wiper (Ohms) (Typ) -

Buying Guide

Choosing Integrated Circuits (ICs)

Choosing an IC starts with the datasheet's absolute maximums and recommended operating conditions — never design to typical values. For microcontrollers, budget 30–50% flash/RAM headroom and verify peripheral availability in the exact package (pin-count often removes features). For power ICs, check the controller's minimum on-time, bootstrap voltage and thermal derating at your switching frequency. Interface transceivers must match the bus standard's fault ratings — RS-485 common-mode range, CAN bus fault protection (±40 V or system-level parts). Verify the moisture sensitivity level (MSL) for BGA/QFN parts in your reflow process, and always order by full part number including suffix (package, temperature grade, reel size) — the base number alone is ambiguous.

Cross-Brand Equivalents

Specs-Comparable Alternatives

Matched on package, key parameters and mounting
Part Number Description Stock Unit Price Match
CAT5112YI-50-GT3 IC DGTL POT 50KOHM 32TAP 8TSSOP 2,760 $1.8360 100%
CAT5113YI-50-GT3 CAT5113 - 100-TAP DIGITALLY PROG 2,693 $1.8900 100%
CAT5111YI-50-GT3 IC DGTL POT 50KOHM 100TAP 8TSSOP 2,894 $1.7550 100%
CAT5114YI-50-T3 IC DGTL POT INTERFACE 8TSSOP 2,189 RFQ 100%
CAT5111YI-50-G DIGIPOT, 50000OHM, 100 PSTN 3,243 $1.5600 100%
N57M5114YD50TG IC DGTL POT 50KOHM 32TAP 8TSSOP 1,607 RFQ 100%
Alternatives verified in stock at Xinyun IC Verify dielectric and reflow profile against the datasheet before release

Same Manufacturer

Sanyo Semiconductor/ON Semiconductor Parts in Stock

Request a Quote

Need CAT5111YI-50-T3 or an alternative?

Send your quantity — our team replies with pricing and lead time within 24 hours, from franchised channels only.