CAT5111VI50 Sanyo Semiconductor/ON Semiconductor component image

CAT5111VI50

In Stock

Sanyo Semiconductor/ON Semiconductor logo Sanyo Semiconductor/ON Semiconductor · franchised distributor

IC DGTL POT INTERFACE 8SOIC

Listed in Data Acquisition - Digital Potentiometers

3,736 pcs in stock ships same day before 6pm

RFQ for pricing — volume discounts available for this part.

100% Original Same-Day Ship 180-Day Warranty Worldwide Delivery

Overview

What is the CAT5111VI50?

CAT5111VI50 is a ic dgtl pot interface 8soic, featuring the 8-SOIC (0.154", 3.90mm Width) package, Surface Mount mounting, a supply range of 2.5V ~ 6V. Available from Xinyun IC with immediate dispatch and a 180-day warranty.

Same Series

Sanyo Semiconductor/ON Semiconductor Series Variants in Stock

10 variants of this series in stock
Part Number Description Stock Unit Price Status
CAT5111VI-50-T3 IC DGTL POT INTERFACE 8SOIC 888 RFQ In Stock
CAT5111VI-00-T3 IC DGTL POT INTERFACE 8SOIC 1,199 RFQ In Stock
CAT5111VI10 IC DGTL POT INTERFACE 8SOIC 4,454 RFQ In Stock
CAT5111YI-00-T3 IC DGTL POT INTERFACE 8TSSOP 3,015 RFQ In Stock
CAT5111YI-10-T3 IC DGTL POT INTERFACE 8TSSOP 4,521 RFQ In Stock
CAT5111YI00 IC DGTL POT INTERFACE 8TSSOP 3,227 RFQ In Stock
CAT5111LI50 IC DGTL POT INTERFACE 8DIP 2,979 RFQ In Stock
CAT5111YI-50-T3 IC DGTL POT INTERFACE 8TSSOP 4,848 RFQ In Stock
CAT5111VI00 IC DGTL POT INTERFACE 8SOIC 3,674 RFQ In Stock
+ 1 more variants in stock — browse the full category

Technical Parameters

CAT5111VI50 Specifications

Series CAT5111
Package Tube
Part Status Obsolete
Taper Linear
Configuration Potentiometer
Number of Circuits 1
Number of Taps 100
Resistance (Ohms) 50k
Interface Up/Down (U/D, INC, CS)
Memory Type Non-Volatile
Voltage - Supply 2.5V ~ 6V
Features -
Tolerance ±20%
Temperature Coefficient (Typ) 300ppm/°C
Mounting Type Surface Mount
Supplier Device Package 8-SOIC
Package / Case 8-SOIC (0.154", 3.90mm Width)
Operating Temperature -40°C ~ 85°C
Resistance - Wiper (Ohms) (Typ) -

Buying Guide

Choosing Integrated Circuits (ICs)

Choosing an IC starts with the datasheet's absolute maximums and recommended operating conditions — never design to typical values. For microcontrollers, budget 30–50% flash/RAM headroom and verify peripheral availability in the exact package (pin-count often removes features). For power ICs, check the controller's minimum on-time, bootstrap voltage and thermal derating at your switching frequency. Interface transceivers must match the bus standard's fault ratings — RS-485 common-mode range, CAN bus fault protection (±40 V or system-level parts). Verify the moisture sensitivity level (MSL) for BGA/QFN parts in your reflow process, and always order by full part number including suffix (package, temperature grade, reel size) — the base number alone is ambiguous.

Cross-Brand Equivalents

Specs-Comparable Alternatives

Matched on package, key parameters and mounting
Part Number Description Stock Unit Price Match
CAT5113VI-50-GT3 IC DGTL POT 50KOHM 100TAP 8SOIC 2,513 $2.0250 100%
CAT5111VI-50-GT3 CAT5111 - 100-TAP DIGITALLY PROG 3,085 $1.6400 100%
CAT5112VI-50-GT3 IC DGTL POT 50KOHM 32TAP 8SOIC 2,758 $1.8360 100%
N57M5114WD50TG IC DGTL POT 50KOHM 32TAP 8SOIC 4,710 RFQ 100%
CAT5112VI50 IC DGTL POT 50KOHM 32TAP 8SOIC 4,309 RFQ 100%
CAT5113VI50 DIGIPOT, 50000OHM, 100 PSTN 2,826 $1.8000 100%
Alternatives verified in stock at Xinyun IC Verify dielectric and reflow profile against the datasheet before release

Same Manufacturer

Sanyo Semiconductor/ON Semiconductor Parts in Stock

Request a Quote

Need CAT5111VI50 or an alternative?

Send your quantity — our team replies with pricing and lead time within 24 hours, from franchised channels only.