BD50HA3MEFJ-ME2 ROHM Semiconductor component image

BD50HA3MEFJ-ME2

In Stock

ROHM Semiconductor logo ROHM Semiconductor · franchised distributor

IC REG LINEAR 5V 1.5A 8HTSOP

Listed in PMIC - Voltage Regulators - Linear

6,293 pcs in stock ships same day before 6pm

from $0.2929

Quantity Unit Price
1 - 2,499 $0.8000
2,500+ $0.2929 BEST
100% Original Same-Day Ship 180-Day Warranty Worldwide Delivery

Overview

What is the BD50HA3MEFJ-ME2?

BD50HA3MEFJ-ME2 is a ic reg linear 5v 1.5a 8htsop, featuring the 8-SOIC (0.154", 3.90mm Width) Exposed Pad package, Surface Mount mounting. Stocked at Xinyun IC — volume pricing and datasheet support available on request.

Same Series

ROHM Semiconductor Series Variants in Stock

9 variants of this series in stock
Part Number Description Stock Unit Price Status
BD25HA3MEFJ-ME2 IC REG LIN 2.5V 300MA 8HTSOP-J 5,982 $0.8400 In Stock
BD70HA3MEFJ-ME2 IC REG LINEAR 7V 300MA 8HTSOP-J 5,992 $0.8400 In Stock
BD18HA3MEFJ-ME2 IC REG LIN 1.8V 300MA 8HTSOP-J 5,989 $0.8400 In Stock
BD15HA3MEFJ-ME2 IC REG LIN 1.5V 300MA 8HTSOP-J 5,994 $0.8400 In Stock
BD60HA3MEFJ-ME2 IC REG LINEAR 6V 300MA 8HTSOP 5,603 $0.9000 In Stock
BD30HA3MEFJ-ME2 IC REG LINEAR 3V 300MA 8HTSOP 5,587 $0.9000 In Stock
BD33HA3MEFJ-ME2 IC REG LIN 3.3V 300MA 8HTSOP-J 5,991 $0.8400 In Stock
BD00HA3MEFJ-ME2 IC REG LIN POS ADJ 300MA 8HTSOP 5,985 $0.8400 In Stock
+ 1 more variants in stock — browse the full category

Technical Parameters

BD50HA3MEFJ-ME2 Specifications

Series Automotive, AEC-Q100
Package Tape & Reel (TR)Cut Tape (CT)Digi-Reel®
Part Status Active
Output Configuration Positive
Output Type Fixed
Number of Regulators 1
Voltage - Input (Max) 8V
Voltage - Output (Min/Fixed) 5V
Voltage - Output (Max) -
Voltage Dropout (Max) 0.9V @ 300mA
Current - Output 1.5A
Current - Quiescent (Iq) -
Current - Supply (Max) 900 µA
PSRR -
Control Features Enable
Protection Features Over Current, Over Temperature, Soft Start
Operating Temperature -40°C ~ 105°C (TA)
Mounting Type Surface Mount
Package / Case 8-SOIC (0.154", 3.90mm Width) Exposed Pad
Supplier Device Package 8-HTSOP-J

Buying Guide

Choosing Integrated Circuits (ICs)

Choosing an IC starts with the datasheet's absolute maximums and recommended operating conditions — never design to typical values. For microcontrollers, budget 30–50% flash/RAM headroom and verify peripheral availability in the exact package (pin-count often removes features). For power ICs, check the controller's minimum on-time, bootstrap voltage and thermal derating at your switching frequency. Interface transceivers must match the bus standard's fault ratings — RS-485 common-mode range, CAN bus fault protection (±40 V or system-level parts). Verify the moisture sensitivity level (MSL) for BGA/QFN parts in your reflow process, and always order by full part number including suffix (package, temperature grade, reel size) — the base number alone is ambiguous.

Same Manufacturer

ROHM Semiconductor Parts in Stock

Request a Quote

Need BD50HA3MEFJ-ME2 or an alternative?

Send your quantity — our team replies with pricing and lead time within 24 hours, from franchised channels only.