BD3575FP-E2 ROHM Semiconductor component image

BD3575FP-E2

In Stock

ROHM Semiconductor logo ROHM Semiconductor · franchised distributor

IC REG LIN POS ADJ 500MA TO252-3

Listed in PMIC - Voltage Regulators - Linear

3,145 pcs in stock ships same day before 6pm

from $1.6050

Quantity Unit Price
1 - 1,999 $1.6050 BEST
2,000+ $1.6050 BEST
100% Original Same-Day Ship 180-Day Warranty Worldwide Delivery

Overview

What is the BD3575FP-E2?

BD3575FP-E2 is a ic reg lin pos adj 500ma to252-3, featuring the TO-252-3, DPak (2 Leads + Tab), SC-63 package, Surface Mount mounting. Stocked at Xinyun IC — volume pricing and datasheet support available on request.

Same Series

ROHM Semiconductor Series Variants in Stock

11 variants of this series in stock
Part Number Description Stock Unit Price Status
BD3572FP-E2 IC REG LIN POS ADJ 500MA TO252-5 1,711 $3.0100 In Stock
BD3571FP-E2 IC REG LINEAR 5V 500MA TO252 1,434 $3.6000 In Stock
BD3574HFP-TR IC REG LINEAR 5V 500MA HRP5 1,420 $3.6100 In Stock
BD3573HFP-TR IC REG LINEAR 3.3V 500MA HRP-5 3,099 $1.6396 In Stock
BD3571HFP-TR IC REG LINEAR 5V 500MA HRP-5 1,578 $3.2700 In Stock
BD3575HFP-TR IC REG LIN POS ADJ 500MA HRP-5 1,576 $3.2700 In Stock
BD3572HFP-TR IC REG LIN POS ADJ 500MA HRP-5 2,487 $2.0459 In Stock
BD3570HFP-TR IC REG LINEAR 3.3V 500MA HRP-5 3,086 $1.6396 In Stock
BD3570FP-E2 IC REG LINEAR 3.3V 500MA TO252-3 1,710 $3.0100 In Stock
BD3573FP-E2 IC REG LINEAR 3.3V 500MA TO252 3,349 $1.5085 In Stock
+ 1 more variants in stock — browse the full category

Technical Parameters

BD3575FP-E2 Specifications

Series -
Package Tape & Reel (TR)
Part Status Not For New Designs
Output Configuration Positive
Output Type Adjustable
Number of Regulators 1
Voltage - Input (Max) 36V
Voltage - Output (Min/Fixed) 2.8V
Voltage - Output (Max) 12V
Voltage Dropout (Max) 0.48V @ 200mA
Current - Output 500mA
Current - Quiescent (Iq) 30 µA
Current - Supply (Max) 50 µA
PSRR 55dB (120Hz)
Control Features -
Protection Features Over Current, Over Temperature
Operating Temperature -40°C ~ 125°C
Mounting Type Surface Mount
Package / Case TO-252-3, DPak (2 Leads + Tab), SC-63
Supplier Device Package TO-252-3

Buying Guide

Choosing Integrated Circuits (ICs)

Choosing an IC starts with the datasheet's absolute maximums and recommended operating conditions — never design to typical values. For microcontrollers, budget 30–50% flash/RAM headroom and verify peripheral availability in the exact package (pin-count often removes features). For power ICs, check the controller's minimum on-time, bootstrap voltage and thermal derating at your switching frequency. Interface transceivers must match the bus standard's fault ratings — RS-485 common-mode range, CAN bus fault protection (±40 V or system-level parts). Verify the moisture sensitivity level (MSL) for BGA/QFN parts in your reflow process, and always order by full part number including suffix (package, temperature grade, reel size) — the base number alone is ambiguous.

Same Manufacturer

ROHM Semiconductor Parts in Stock

Request a Quote

Need BD3575FP-E2 or an alternative?

Send your quantity — our team replies with pricing and lead time within 24 hours, from franchised channels only.