BD33HC5WEFJ-E2 ROHM Semiconductor component image

BD33HC5WEFJ-E2

In Stock

ROHM Semiconductor logo ROHM Semiconductor · franchised distributor

IC REG LINEAR 3.3V 1.5A 8HTSOP

Listed in PMIC - Voltage Regulators - Linear

6,704 pcs in stock ships same day before 6pm

from $0.2632

Quantity Unit Price
1 - 2,499 $0.7500
2,500 - 4,999 $0.2726
5,000+ $0.2632 BEST
100% Original Same-Day Ship 180-Day Warranty Worldwide Delivery

Overview

What is the BD33HC5WEFJ-E2?

BD33HC5WEFJ-E2 is a ic reg linear 3.3v 1.5a 8htsop, featuring the 8-SOIC (0.154", 3.90mm Width) Exposed Pad package, Surface Mount mounting. Available from Xinyun IC with immediate dispatch and a 180-day warranty.

Same Series

ROHM Semiconductor Series Variants in Stock

9 variants of this series in stock
Part Number Description Stock Unit Price Status
BD60HC5WEFJ-E2 IC REG LINEAR 6V 1.5A 8HTSOP 6,711 $0.7500 In Stock
BD50HC5WEFJ-E2 IC REG LINEAR 5V 1.5A 8HTSOP 6,700 $0.7500 In Stock
BD18HC5WEFJ-E2 IC REG LINEAR 1.8V 1.5A 8HTSOP 6,706 $0.7500 In Stock
BD70HC5WEFJ-E2 IC REG LINEAR 7V 1.5A 8HTSOP 6,708 $0.7500 In Stock
BD25HC5WEFJ-E2 IC REG LINEAR 2.5V 1.5A 8HTSOP 7,187 $0.7000 In Stock
BD30HC5WEFJ-E2 IC REG LINEAR 3V 1.5A 8HTSOP 6,697 $0.7500 In Stock
BD00HC5WEFJ-E2 IC REG LIN POS ADJ 1.5A 8HTSOP 5,851 $0.8600 In Stock
BD15HC5WEFJ-E2 IC REG LINEAR 1.5V 1.5A 8HTSOP 7,179 $0.7000 In Stock
+ 1 more variants in stock — browse the full category

Technical Parameters

BD33HC5WEFJ-E2 Specifications

Series -
Package Tape & Reel (TR)Cut Tape (CT)Digi-Reel®
Part Status Active
Output Configuration Positive
Output Type Fixed
Number of Regulators 1
Voltage - Input (Max) 8V
Voltage - Output (Min/Fixed) 3.3V
Voltage - Output (Max) -
Voltage Dropout (Max) 0.93V @ 1.5A
Current - Output 1.5A
Current - Quiescent (Iq) 0.6 mA
Current - Supply (Max) 900 µA
PSRR -
Control Features Enable
Protection Features Over Current, Over Temperature, Soft Start
Operating Temperature -25°C ~ 85°C
Mounting Type Surface Mount
Package / Case 8-SOIC (0.154", 3.90mm Width) Exposed Pad
Supplier Device Package 8-HTSOP-J

Buying Guide

Choosing Integrated Circuits (ICs)

Choosing an IC starts with the datasheet's absolute maximums and recommended operating conditions — never design to typical values. For microcontrollers, budget 30–50% flash/RAM headroom and verify peripheral availability in the exact package (pin-count often removes features). For power ICs, check the controller's minimum on-time, bootstrap voltage and thermal derating at your switching frequency. Interface transceivers must match the bus standard's fault ratings — RS-485 common-mode range, CAN bus fault protection (±40 V or system-level parts). Verify the moisture sensitivity level (MSL) for BGA/QFN parts in your reflow process, and always order by full part number including suffix (package, temperature grade, reel size) — the base number alone is ambiguous.

Same Manufacturer

ROHM Semiconductor Parts in Stock

Request a Quote

Need BD33HC5WEFJ-E2 or an alternative?

Send your quantity — our team replies with pricing and lead time within 24 hours, from franchised channels only.