BD10KA5FP-E2 ROHM Semiconductor component image

BD10KA5FP-E2

In Stock

ROHM Semiconductor logo ROHM Semiconductor · franchised distributor

IC REG LINEAR 1V 500MA TO252-3

Listed in PMIC - Voltage Regulators - Linear

9,456 pcs in stock ships same day before 6pm

from $0.5275

Quantity Unit Price
1 - 1,999 $0.5312
2,000+ $0.5275 BEST
100% Original Same-Day Ship 180-Day Warranty Worldwide Delivery

Overview

What is the BD10KA5FP-E2?

BD10KA5FP-E2 is a ic reg linear 1v 500ma to252-3, featuring the TO-252-3, DPak (2 Leads + Tab), SC-63 package, Surface Mount mounting. Stocked at Xinyun IC — volume pricing and datasheet support available on request.

Same Series

ROHM Semiconductor Series Variants in Stock

23 variants of this series in stock
Part Number Description Stock Unit Price Status
BD33KA5FP-E2 IC REG LINEAR 3.3V 500MA TO252-3 4,075 $1.2400 In Stock
BD00KA5WFP-E2 IC REG LIN POS ADJ 500MA TO252-5 5,407 $0.9300 In Stock
BD12KA5FP-E2 IC REG LINEAR 1.2V 500MA TO252-3 17,287 $0.2900 In Stock
BD25KA5WF-E2 IC REG LINEAR 2.5V 500MA 8SOP 3,609 $1.4000 In Stock
BD15KA5WFP-E2 IC REG LINEAR 1.5V 500MA TO252-5 4,081 $1.2400 In Stock
BD18KA5WF-E2 IC REG LINEAR 1.8V 500MA 8SOP 3,618 $1.4000 In Stock
BD30KA5FP-E2 IC REG LINEAR 3V 500MA TO252-3 9,551 $0.5255 In Stock
BD12KA5WF-E2 IC REG LINEAR 1.2V 500MA 8SOP 3,617 $1.4000 In Stock
BD18KA5FP-E2 IC REG LINEAR 1.8V 500MA TO252 4,079 $1.2400 In Stock
BD25KA5FP-E2 IC REG LINEAR 2.5V 500MA TO252 4,066 $1.2400 In Stock
+ 13 more variants in stock — browse the full category

Technical Parameters

BD10KA5FP-E2 Specifications

Series -
Package Tape & Reel (TR)
Part Status Active
Output Configuration Positive
Output Type Fixed
Number of Regulators 1
Voltage - Input (Max) 5.5V
Voltage - Output (Min/Fixed) 1V
Voltage - Output (Max) -
Voltage Dropout (Max) -
Current - Output 500mA
Current - Quiescent (Iq) 0.35 mA
Current - Supply (Max) 550 µA
PSRR 50dB (120Hz)
Control Features -
Protection Features Over Current, Over Temperature
Operating Temperature -40°C ~ 105°C
Mounting Type Surface Mount
Package / Case TO-252-3, DPak (2 Leads + Tab), SC-63
Supplier Device Package TO-252-3

Buying Guide

Choosing Integrated Circuits (ICs)

Choosing an IC starts with the datasheet's absolute maximums and recommended operating conditions — never design to typical values. For microcontrollers, budget 30–50% flash/RAM headroom and verify peripheral availability in the exact package (pin-count often removes features). For power ICs, check the controller's minimum on-time, bootstrap voltage and thermal derating at your switching frequency. Interface transceivers must match the bus standard's fault ratings — RS-485 common-mode range, CAN bus fault protection (±40 V or system-level parts). Verify the moisture sensitivity level (MSL) for BGA/QFN parts in your reflow process, and always order by full part number including suffix (package, temperature grade, reel size) — the base number alone is ambiguous.

Same Manufacturer

ROHM Semiconductor Parts in Stock

Request a Quote

Need BD10KA5FP-E2 or an alternative?

Send your quantity — our team replies with pricing and lead time within 24 hours, from franchised channels only.