ATSAMR21E19A-MFT Roving Networks / Microchip Technology component image

ATSAMR21E19A-MFT

In Stock

Roving Networks / Microchip Technology logo Roving Networks / Microchip Technology · franchised distributor

IC RF TXRX+MCU ISM>1GHZ 32VFQFN

Listed in RF Transceiver ICs

767 pcs in stock ships same day before 6pm

from $5.6135

Quantity Unit Price
1 - 4,999 $6.9000
5,000+ $5.6135 BEST
100% Original Same-Day Ship 180-Day Warranty Worldwide Delivery

Overview

What is the ATSAMR21E19A-MFT?

ATSAMR21E19A-MFT is a ic rf txrx+mcu ism>1ghz 32vfqfn, featuring a frequency of 2.4GHz, the 32-VFQFN Exposed Pad case. Stocked at Xinyun IC — volume pricing and datasheet support available on request.

Same Series

Roving Networks / Microchip Technology Series Variants in Stock

9 variants of this series in stock
Part Number Description Stock Unit Price Status
ATSAMR21G16A-MU IC RF TXRX+MCU ISM>1GHZ 48VFQFN 2,560 $1.9900 In Stock
ATSAMR21E16A-MU IC RF TXRX+MCU ISM>1GHZ 32VQFN 1,187 $4.3700 In Stock
ATSAMR21E18A-MF IC RF TXRX+MCU ISM>1GHZ 32VQFN 912 $5.7200 In Stock
ATSAMR21G18A-MF IC RF TXRX+MCU ISM<1GHZ 48VFQFN 934 $5.5860 In Stock
ATSAMR21E18A-MUT IC RF TXRX+MCU ISM>1GHZ 32VQFN 987 $5.2800 In Stock
ATSAMR21E17A-MF IC RF TXRX+MCU ISM>1GHZ 32VQFN 2,187 $2.3300 In Stock
ATSAMR21E17A-MU IC RF TXRX+MCU ISM>1GHZ 32VQFN 2,391 $2.1200 In Stock
ATSAMR21G18A-MUT IC RF TXRX+MCU ISM>1GHZ 48VFQFN 945 $5.5300 In Stock
+ 1 more variants in stock — browse the full category

Technical Parameters

ATSAMR21E19A-MFT Specifications

Series -
Package Tape & Reel (TR)Cut Tape (CT)Digi-Reel®
Part Status Active
Type TxRx + MCU
RF Family/Standard General ISM > 1GHZ
Protocol -
Modulation O-QPSK
Frequency 2.4GHz
Data Rate (Max) 250kbps
Power - Output 4dBm
Sensitivity -99dBm
Memory Size 768kB Flash, 32kB SRAM
Serial Interfaces I²C, SPI, UART, USART, USB
GPIO 16
Voltage - Supply 2.35V ~ 3.6V
Current - Receiving 11.3mA ~ 11.8mA
Current - Transmitting 7.2mA ~ 13.8mA
Operating Temperature -40°C ~ 125°C
Mounting Type Surface Mount
Package / Case 32-VFQFN Exposed Pad
Supplier Device Package 32-QFN (5x5)

Buying Guide

Choosing RF/IF and RFID

RF component selection lives and dies by the frequency-conditioned numbers. Judge filters by insertion loss and return loss at the band edges, not center; check passband ripple for modulation-sensitive links. Baluns must cover the full band with amplitude balance ±0.5 dB and phase ±5° or your modulation quality (EVM) degrades. For amplifiers, distinguish small-signal gain from compression: back off 8–10 dB from P1dB for linear modulation, more for high-order QAM. Verify 50 Ω match assumptions — antenna ports and differential chains need their matching networks at design frequency. Finally, respect PCB layout as part of the component: ground vias, pad geometry and trace length all sit inside the signal path above ~1 GHz; datasheet evaluation-board layouts are the safest reference.

Same Manufacturer

Roving Networks / Microchip Technology Parts in Stock

Request a Quote

Need ATSAMR21E19A-MFT or an alternative?

Send your quantity — our team replies with pricing and lead time within 24 hours, from franchised channels only.