AT-2210(46) Hirose component image

AT-2210(46)

In Stock

Hirose logo Hirose · franchised distributor

RF ATTENUATOR 10DB 50OHM SMA

Listed in Attenuators

758 pcs in stock ships same day before 6pm

from $6.7298

Quantity Unit Price
1 - 999 $6.9692
1,000+ $6.7298 BEST
100% Original Same-Day Ship 180-Day Warranty Worldwide Delivery

Overview

What is the AT-2210(46)?

AT-2210-46 is a rf attenuator 10db 50ohm sma, featuring the SMA In-Line Module case. Available from Xinyun IC with immediate dispatch and a 180-day warranty.

Same Series

Hirose Series Variants in Stock

24 variants of this series in stock
Part Number Description Stock Unit Price Status
AT-2206(46) RF ATTENUATOR 6DB 50OHM 4SMD 2,146 RFQ In Stock
AT-2201(40) RF ATTENUATOR 1DB 50OHM 4SMD 493 $11.2710 In Stock
AT-2205(46) RF ATTENUATOR 5DB 50OHM 4SMD 3,638 RFQ In Stock
AT-2220(40) RF ATTENUATOR 20DB 50OHM 4SMD 490 $11.2710 In Stock
AT-2207(46) RF ATTENUATOR 7DB 50OHM 4SMD 3,995 RFQ In Stock
AT-2210(40) RF ATTENUATOR 10DB 50OHM SMA 487 $11.2710 In Stock
AT-2203(40) RF ATTENUATOR 3DB 50OHM 4SMD 488 $11.2710 In Stock
AT-2200-(0)(46) RF ATTENUATOR 0DB 50OHM 4SMD 2,208 RFQ In Stock
AT-2203(46) RF ATTENUATOR 3DB 50OHM 4SMD 4,379 RFQ In Stock
AT-2206(40) RF ATTENUATOR 6DB 50OHM 4SMD 481 $11.2710 In Stock
+ 14 more variants in stock — browse the full category

Technical Parameters

AT-2210(46) Specifications

Series -
Package Bulk
Part Status Active
Attenuation Value 10dB
Frequency Range 0 Hz ~ 2.5 GHz
Power (Watts) 1W
Impedance 50 Ohms
Package / Case SMA In-Line Module

Buying Guide

Choosing RF/IF and RFID

RF component selection lives and dies by the frequency-conditioned numbers. Judge filters by insertion loss and return loss at the band edges, not center; check passband ripple for modulation-sensitive links. Baluns must cover the full band with amplitude balance ±0.5 dB and phase ±5° or your modulation quality (EVM) degrades. For amplifiers, distinguish small-signal gain from compression: back off 8–10 dB from P1dB for linear modulation, more for high-order QAM. Verify 50 Ω match assumptions — antenna ports and differential chains need their matching networks at design frequency. Finally, respect PCB layout as part of the component: ground vias, pad geometry and trace length all sit inside the signal path above ~1 GHz; datasheet evaluation-board layouts are the safest reference.

Cross-Brand Equivalents

Specs-Comparable Alternatives

Matched on package, key parameters and mounting
Part Number Description Stock Unit Price Match
CATTEN-0100 RF ATTENUATOR 10DB 50OHM SMA 312 $18.5500 92%
CATTEN-02R0 RF ATTENUATOR 2DB 50OHM SMA 304 $18.5500 92%
CATTEN-07R0 RF ATTENUATOR 7DB 50OHM SMA 303 $18.5500 92%
CATTEN-05R0 RF ATTENUATOR 5DB 50OHM SMA 318 $18.5500 92%
CATTEN-09R0 RF ATTENUATOR 9DB 50OHM SMA 307 $18.5500 92%
CATTEN-01R5 RF ATTENUATOR 1.5DB 50OHM SMA 309 $18.5500 92%
Alternatives verified in stock at Xinyun IC Verify dielectric and reflow profile against the datasheet before release

Same Manufacturer

Hirose Parts in Stock

Request a Quote

Need AT-2210(46) or an alternative?

Send your quantity — our team replies with pricing and lead time within 24 hours, from franchised channels only.