AT-2201(40) Hirose component image

AT-2201(40)

In Stock

Hirose logo Hirose · franchised distributor

RF ATTENUATOR 1DB 50OHM 4SMD

Listed in Attenuators

493 pcs in stock ships same day before 6pm

from $11.2710

Quantity Unit Price
1+ $11.2710 BEST
100% Original Same-Day Ship 180-Day Warranty Worldwide Delivery

Overview

What is the AT-2201(40)?

AT-2201-40 is a rf attenuator 1db 50ohm 4smd, featuring the 4-SMD, No Lead case. It is in stock at Xinyun IC with tiered pricing and same-day worldwide shipping.

Same Series

Hirose Series Variants in Stock

24 variants of this series in stock
Part Number Description Stock Unit Price Status
AT-2206(46) RF ATTENUATOR 6DB 50OHM 4SMD 2,146 RFQ In Stock
AT-2205(46) RF ATTENUATOR 5DB 50OHM 4SMD 3,638 RFQ In Stock
AT-2220(40) RF ATTENUATOR 20DB 50OHM 4SMD 490 $11.2710 In Stock
AT-2207(46) RF ATTENUATOR 7DB 50OHM 4SMD 3,995 RFQ In Stock
AT-2210(40) RF ATTENUATOR 10DB 50OHM SMA 487 $11.2710 In Stock
AT-2203(40) RF ATTENUATOR 3DB 50OHM 4SMD 488 $11.2710 In Stock
AT-2200-(0)(46) RF ATTENUATOR 0DB 50OHM 4SMD 2,208 RFQ In Stock
AT-2203(46) RF ATTENUATOR 3DB 50OHM 4SMD 4,379 RFQ In Stock
AT-2206(40) RF ATTENUATOR 6DB 50OHM 4SMD 481 $11.2710 In Stock
AT-2202(40) RF ATTENUATOR 2DB 50OHM 4SMD 490 $11.2710 In Stock
+ 14 more variants in stock — browse the full category

Technical Parameters

AT-2201(40) Specifications

Series -
Package Bulk
Part Status Last Time Buy
Attenuation Value 1dB
Frequency Range 0 Hz ~ 2.5 GHz
Power (Watts) 1W
Impedance 50 Ohms
Package / Case 4-SMD, No Lead

Buying Guide

Choosing RF/IF and RFID

RF component selection lives and dies by the frequency-conditioned numbers. Judge filters by insertion loss and return loss at the band edges, not center; check passband ripple for modulation-sensitive links. Baluns must cover the full band with amplitude balance ±0.5 dB and phase ±5° or your modulation quality (EVM) degrades. For amplifiers, distinguish small-signal gain from compression: back off 8–10 dB from P1dB for linear modulation, more for high-order QAM. Verify 50 Ω match assumptions — antenna ports and differential chains need their matching networks at design frequency. Finally, respect PCB layout as part of the component: ground vias, pad geometry and trace length all sit inside the signal path above ~1 GHz; datasheet evaluation-board layouts are the safest reference.

Cross-Brand Equivalents

Specs-Comparable Alternatives

Matched on package, key parameters and mounting
Part Number Description Stock Unit Price Match
AT-2220(40) RF ATTENUATOR 20DB 50OHM 4SMD 490 $11.2710 100%
AT-2203(40) RF ATTENUATOR 3DB 50OHM 4SMD 488 $11.2710 100%
AT-2206(40) RF ATTENUATOR 6DB 50OHM 4SMD 481 $11.2710 100%
AT-2202(40) RF ATTENUATOR 2DB 50OHM 4SMD 490 $11.2710 100%
AT-2209(40) RF ATTENUATOR 9DB 50OHM 4SMD 492 $11.2710 100%
AT-2204(40) RF ATTENUATOR 4DB 50OHM 4SMD 492 $11.2710 100%
Alternatives verified in stock at Xinyun IC Verify dielectric and reflow profile against the datasheet before release

Same Manufacturer

Hirose Parts in Stock

Request a Quote

Need AT-2201(40) or an alternative?

Send your quantity — our team replies with pricing and lead time within 24 hours, from franchised channels only.