605SJR00500 Ohmite component image

605SJR00500

In Stock

Ohmite logo Ohmite · franchised distributor

RES 0.005 OHM 5% 1/2W L BEND

Listed in Chip Resistor - Surface Mount

4,056 pcs in stock ships same day before 6pm

RFQ for pricing — volume discounts available for this part.

100% Original Same-Day Ship 180-Day Warranty Worldwide Delivery

Overview

What is the 605SJR00500?

605SJR00500 is a res 0.005 ohm 5% 1/2w l bend, featuring a power rating of 0.5W, 1/2W, a tolerance of ±5%, a Metal Element composition, and the Strip, L Bend case. Available from Xinyun IC with immediate dispatch and a 180-day warranty.

Same Series

Ohmite Series Variants in Stock

10 variants of this series in stock
Part Number Description Stock Unit Price Status
610SJR00300 RES 0.003 OHM 5% 1W C BEND 854 RFQ In Stock
610SJR00200 RES 0.002 OHM 5% 1W C BEND 4,745 RFQ In Stock
602SJR00300 RES 0.003 OHM 5% 1/4W L BEND 3,630 RFQ In Stock
602SJR00500 RES 0.005 OHM 5% 1/4W L BEND 4,906 RFQ In Stock
605SJR00200 RES 0.002 OHM 5% 1/2W L BEND 659 RFQ In Stock
605SJR00500-T RES 0.005 OHM 5% 1/2W L BEND 4,692 RFQ In Stock
605SJR00800 RES 0.008 OHM 5% 1/2W L BEND 4,215 RFQ In Stock
605SJR00375-T RES 0.00375 OHM 5% 1/2W LBEND 4,254 RFQ In Stock
610SJR00200-T RES 0.002 OHM 5% 1W C BEND 1,418 RFQ In Stock
+ 1 more variants in stock — browse the full category

Technical Parameters

605SJR00500 Specifications

Series 60S
Package Bulk
Part Status Obsolete
Resistance 5 mOhms
Tolerance ±5%
Power (Watts) 0.5W, 1/2W
Composition Metal Element
Features Current Sense, Flame Proof, Moisture Resistant, Safety
Temperature Coefficient ±100ppm/°C
Operating Temperature -40°C ~ 155°C
Package / Case Strip, L Bend
Supplier Device Package SMD
Ratings -
Size / Dimension 0.551" L x 0.205" W (14.00mm x 5.20mm)
Height - Seated (Max) 0.079" (2.00mm)
Number of Terminations 2
Failure Rate -

Buying Guide

Choosing Resistors

When selecting a chip resistor, match four parameters in order of impact: resistance value and tolerance (5% suffices for pulls and straps; 1% or better for precision dividers), power rating (0603 standard is 0.1 W — derate 50% for continuous duty in enclosed assemblies), temperature coefficient (±100~200 ppm/°C typical for thick film; use thin film below ±50 ppm/°C where stability matters), and packaging (tape & reel for automated assembly, cut tape for prototyping). For zero-ohm jumpers, verify the maximum continuous current — most 0603 jumpers handle 1–2 A. In humid or automotive environments, prefer moisture-resistant coatings and AEC-Q200-qualified parts. Higher voltages need larger cases or anti-surge (thick-film surge-resistant) constructions, since arcing and creepage limits scale with package geometry.

Cross-Brand Equivalents

Specs-Comparable Alternatives

Matched on package, key parameters and mounting
Part Number Description Stock Unit Price Match
605SJR00500E RES 0.005 OHM 5% 1/2W L BEND 8,754 $0.5736 100%
605SJR00375E RES 0.00375 OHM 5% 1/2W LBEND 8,764 $0.5735 74%
605SJR00800E RES 0.008 OHM 5% 1/2W L BEND 8,754 $0.5735 58%
605SJR00500E-T RES 0.005 OHM 5% 1/2W L BEND 4,650 RFQ 100%
605SJR00500-T RES 0.005 OHM 5% 1/2W L BEND 4,692 RFQ 100%
605SJR00375-T RES 0.00375 OHM 5% 1/2W LBEND 4,254 RFQ 74%
Alternatives verified in stock at Xinyun IC Verify dielectric and reflow profile against the datasheet before release

Same Manufacturer

Ohmite Parts in Stock

Request a Quote

Need 605SJR00500 or an alternative?

Send your quantity — our team replies with pricing and lead time within 24 hours, from franchised channels only.