602SJR00500 Ohmite component image

602SJR00500

In Stock

Ohmite logo Ohmite · franchised distributor

RES 0.005 OHM 5% 1/4W L BEND

Listed in Chip Resistor - Surface Mount

4,906 pcs in stock ships same day before 6pm

RFQ for pricing — volume discounts available for this part.

100% Original Same-Day Ship 180-Day Warranty Worldwide Delivery

Overview

What is the 602SJR00500?

602SJR00500 is a res 0.005 ohm 5% 1/4w l bend, featuring a power rating of 0.25W, 1/4W, a tolerance of ±5%, a Metal Element composition, and the Strip, L Bend case. Stocked at Xinyun IC — volume pricing and datasheet support available on request.

Same Series

Ohmite Series Variants in Stock

10 variants of this series in stock
Part Number Description Stock Unit Price Status
610SJR00300 RES 0.003 OHM 5% 1W C BEND 854 RFQ In Stock
610SJR00200 RES 0.002 OHM 5% 1W C BEND 4,745 RFQ In Stock
602SJR00300 RES 0.003 OHM 5% 1/4W L BEND 3,630 RFQ In Stock
605SJR00500 RES 0.005 OHM 5% 1/2W L BEND 4,056 RFQ In Stock
605SJR00200 RES 0.002 OHM 5% 1/2W L BEND 659 RFQ In Stock
605SJR00500-T RES 0.005 OHM 5% 1/2W L BEND 4,692 RFQ In Stock
605SJR00800 RES 0.008 OHM 5% 1/2W L BEND 4,215 RFQ In Stock
605SJR00375-T RES 0.00375 OHM 5% 1/2W LBEND 4,254 RFQ In Stock
610SJR00200-T RES 0.002 OHM 5% 1W C BEND 1,418 RFQ In Stock
+ 1 more variants in stock — browse the full category

Technical Parameters

602SJR00500 Specifications

Series 60S
Package Bulk
Part Status Obsolete
Resistance 5 mOhms
Tolerance ±5%
Power (Watts) 0.25W, 1/4W
Composition Metal Element
Features Current Sense, Flame Proof, Moisture Resistant, Safety
Temperature Coefficient ±100ppm/°C
Operating Temperature -40°C ~ 155°C
Package / Case Strip, L Bend
Supplier Device Package SMD
Ratings -
Size / Dimension 0.551" L x 0.118" W (14.00mm x 3.00mm)
Height - Seated (Max) 0.028" (0.70mm)
Number of Terminations 2
Failure Rate -

Buying Guide

Choosing Resistors

When selecting a chip resistor, match four parameters in order of impact: resistance value and tolerance (5% suffices for pulls and straps; 1% or better for precision dividers), power rating (0603 standard is 0.1 W — derate 50% for continuous duty in enclosed assemblies), temperature coefficient (±100~200 ppm/°C typical for thick film; use thin film below ±50 ppm/°C where stability matters), and packaging (tape & reel for automated assembly, cut tape for prototyping). For zero-ohm jumpers, verify the maximum continuous current — most 0603 jumpers handle 1–2 A. In humid or automotive environments, prefer moisture-resistant coatings and AEC-Q200-qualified parts. Higher voltages need larger cases or anti-surge (thick-film surge-resistant) constructions, since arcing and creepage limits scale with package geometry.

Cross-Brand Equivalents

Specs-Comparable Alternatives

Matched on package, key parameters and mounting
Part Number Description Stock Unit Price Match
602SJR00500E RES 0.005 OHM 5% 1/4W L BEND 3,643 RFQ 100%
602SJR00500E-T RES 0.005 OHM 5% 1/4W L BEND 1,443 RFQ 100%
602SJR00300E-T RES 0.003 OHM 5% 1/4W L BEND 4,259 RFQ 54%
602SJR00300E RES 0.003 OHM 5% 1/4W L BEND 2,771 $1.8300 54%
602SJR00300 RES 0.003 OHM 5% 1/4W L BEND 3,630 RFQ 54%
Alternatives verified in stock at Xinyun IC Verify dielectric and reflow profile against the datasheet before release

Same Manufacturer

Ohmite Parts in Stock

Request a Quote

Need 602SJR00500 or an alternative?

Send your quantity — our team replies with pricing and lead time within 24 hours, from franchised channels only.