4789PA22101800 Laird - Performance Materials component image

4789PA22101800

In Stock

Laird - Performance Materials logo Laird - Performance Materials · franchised distributor

GSKT FAB/FOAM 9.5X457.2MM DSHAPE

Listed in RFI and EMI - Contacts, Fingerstock and Gaskets

1,262 pcs in stock ships same day before 6pm

from $4.0755

Quantity Unit Price
1 - 87 $4.0755 BEST
88+ $4.0755 BEST
100% Original Same-Day Ship 180-Day Warranty Worldwide Delivery

Overview

What is the 4789PA22101800?

4789PA22101800 is a gskt fab/foam 9.5x457.2mm dshape, featuring the Bulk package. It is in stock at Xinyun IC with tiered pricing and same-day worldwide shipping.

Same Series

Laird - Performance Materials Series Variants in Stock

50+ variants of this series in stock
Part Number Description Stock Unit Price Status
4797PA22101800 GSKT FAB/FOAM 11.3X457.2MM KNIFE 872 $6.0500 In Stock
4742PA22101800 GSKT FAB/FOAM 3.8X457.2MM DSHAPE 1,864 $2.7476 In Stock
4202PA22101800 GSKT FAB/FOAM 6.4X457.2MM DSHAPE 1,671 $3.0771 In Stock
4522PA22101800 GASKET FABRIC/FOAM 4X457.2MM SQ 1,277 $4.0200 In Stock
4242PA22101800 GSKT FAB/FOAM 6.4X457.2MM DSHAPE 1,488 $3.4281 In Stock
4283PA22101800 GASKET FAB/FOAM 4X457.2MM DSHAPE 1,956 $2.6013 In Stock
4212PA22101800 GASKET FAB/FOAM 4.95X457.2MM SQ 1,701 $3.0206 In Stock
4209PA22101800 GASKT FAB/FOAM 3.94X457.2MM RECT 1,860 $2.7495 In Stock
4096PA22101800 GASKT FABRIC/FOAM 7X457.2MM RECT 1,732 $2.9718 In Stock
4693PA22101800 GASKET FAB/FOAM 4.8X457.2MM RECT 1,792 $2.8431 In Stock
More variants of this series in stock — browse the full category

Technical Parameters

4789PA22101800 Specifications

Series 221 FOF
Package Bulk
Part Status Active
Type Fabric Over Foam
Shape D-Shape
Width 0.374" (9.50mm)
Length 18.000" (457.20mm)
Height 0.252" (6.40mm)
Material -
Plating -
Plating - Thickness -
Attachment Method Adhesive
Operating Temperature -

Buying Guide

Choosing RF/IF and RFID

RF component selection lives and dies by the frequency-conditioned numbers. Judge filters by insertion loss and return loss at the band edges, not center; check passband ripple for modulation-sensitive links. Baluns must cover the full band with amplitude balance ±0.5 dB and phase ±5° or your modulation quality (EVM) degrades. For amplifiers, distinguish small-signal gain from compression: back off 8–10 dB from P1dB for linear modulation, more for high-order QAM. Verify 50 Ω match assumptions — antenna ports and differential chains need their matching networks at design frequency. Finally, respect PCB layout as part of the component: ground vias, pad geometry and trace length all sit inside the signal path above ~1 GHz; datasheet evaluation-board layouts are the safest reference.

Same Manufacturer

Laird - Performance Materials Parts in Stock

Request a Quote

Need 4789PA22101800 or an alternative?

Send your quantity — our team replies with pricing and lead time within 24 hours, from franchised channels only.