4522PA22101800 Laird - Performance Materials component image

4522PA22101800

In Stock

Laird - Performance Materials logo Laird - Performance Materials · franchised distributor

GASKET FABRIC/FOAM 4X457.2MM SQ

Listed in RFI and EMI - Contacts, Fingerstock and Gaskets

1,277 pcs in stock ships same day before 6pm

from $1.8363

Quantity Unit Price
1 - 9 $4.0200
10 - 24 $3.5864
25 - 99 $3.2279
100 - 249 $2.9409
250 - 499 $2.6540
500 - 999 $2.3814
1,000 - 2,499 $2.0085
2,500 - 4,999 $1.9080
5,000+ $1.8363 BEST
100% Original Same-Day Ship 180-Day Warranty Worldwide Delivery

Overview

What is the 4522PA22101800?

4522PA22101800 is a gasket fabric/foam 4x457.2mm sq, featuring the Bulk package. Stocked at Xinyun IC — volume pricing and datasheet support available on request.

Same Series

Laird - Performance Materials Series Variants in Stock

50+ variants of this series in stock
Part Number Description Stock Unit Price Status
4797PA22101800 GSKT FAB/FOAM 11.3X457.2MM KNIFE 872 $6.0500 In Stock
4742PA22101800 GSKT FAB/FOAM 3.8X457.2MM DSHAPE 1,864 $2.7476 In Stock
4202PA22101800 GSKT FAB/FOAM 6.4X457.2MM DSHAPE 1,671 $3.0771 In Stock
4242PA22101800 GSKT FAB/FOAM 6.4X457.2MM DSHAPE 1,488 $3.4281 In Stock
4283PA22101800 GASKET FAB/FOAM 4X457.2MM DSHAPE 1,956 $2.6013 In Stock
4212PA22101800 GASKET FAB/FOAM 4.95X457.2MM SQ 1,701 $3.0206 In Stock
4209PA22101800 GASKT FAB/FOAM 3.94X457.2MM RECT 1,860 $2.7495 In Stock
4096PA22101800 GASKT FABRIC/FOAM 7X457.2MM RECT 1,732 $2.9718 In Stock
4693PA22101800 GASKET FAB/FOAM 4.8X457.2MM RECT 1,792 $2.8431 In Stock
4049PA22101800 GASKET FAB/FOAM 6.35X457.2MM SQ 1,496 $3.4281 In Stock
More variants of this series in stock — browse the full category

Technical Parameters

4522PA22101800 Specifications

Series 221 FOF
Package Bulk
Part Status Active
Type Fabric Over Foam
Shape Square
Width 0.157" (4.00mm)
Length 18.000" (457.20mm)
Height 0.157" (4.00mm)
Material -
Plating -
Plating - Thickness -
Attachment Method Adhesive
Operating Temperature -

Buying Guide

Choosing RF/IF and RFID

RF component selection lives and dies by the frequency-conditioned numbers. Judge filters by insertion loss and return loss at the band edges, not center; check passband ripple for modulation-sensitive links. Baluns must cover the full band with amplitude balance ±0.5 dB and phase ±5° or your modulation quality (EVM) degrades. For amplifiers, distinguish small-signal gain from compression: back off 8–10 dB from P1dB for linear modulation, more for high-order QAM. Verify 50 Ω match assumptions — antenna ports and differential chains need their matching networks at design frequency. Finally, respect PCB layout as part of the component: ground vias, pad geometry and trace length all sit inside the signal path above ~1 GHz; datasheet evaluation-board layouts are the safest reference.

Same Manufacturer

Laird - Performance Materials Parts in Stock

Request a Quote

Need 4522PA22101800 or an alternative?

Send your quantity — our team replies with pricing and lead time within 24 hours, from franchised channels only.