4614X-102-152LF J.W. Miller / Bourns component image

4614X-102-152LF

In Stock

J.W. Miller / Bourns logo J.W. Miller / Bourns · franchised distributor

RES ARRAY 7 RES 1.5K OHM 14SIP

Listed in Resistor Networks, Arrays

21,528 pcs in stock ships same day before 6pm

from $0.2328

Quantity Unit Price
1 - 1,999 $0.2328 BEST
2,000+ $0.2328 BEST
100% Original Same-Day Ship 180-Day Warranty Worldwide Delivery

Overview

What is the 4614X-102-152LF?

4614X-102-152LF is a res array 7 res 1.5k ohm 14sip, featuring a resistance of 1.5k, a tolerance of ±2%, the 14-SIP case. Stocked at Xinyun IC — volume pricing and datasheet support available on request.

Same Series

J.W. Miller / Bourns Series Variants in Stock

50+ variants of this series in stock
Part Number Description Stock Unit Price Status
4608X-AP1-105LF RES ARRAY 7 RES 1M OHM 8SIP 37,627 $0.1330 In Stock
4604X-102-393LF RES ARRAY 2 RES 39K OHM 4SIP 66,713 $0.0750 In Stock
4614X-102-822LF RES ARRAY 7 RES 8.2K OHM 14SIP 21,530 $0.2328 In Stock
4606X-102-153LF RES ARRAY 3 RES 15K OHM 6SIP 51,490 $0.0972 In Stock
4606X-102-473 RES ARRAY 3 RES 47K OHM 6SIP 1,467 RFQ In Stock
4610X-101-564 RES ARRAY 9 RES 560K OHM 10SIP 4,492 RFQ In Stock
4606X-102-752LF RES ARRAY 3 RES 7.5K OHM 6SIP 51,480 $0.0972 In Stock
4606X-101-104LF RES ARRAY 5 RES 100K OHM 6SIP 11,947 $0.4200 In Stock
4610X-101-392 RES ARRAY 9 RES 3.9K OHM 10SIP 4,340 RFQ In Stock
4610X-101-821LF RES ARRAY 9 RES 820 OHM 10SIP 7,982 $0.6300 In Stock
More variants of this series in stock — browse the full category

Technical Parameters

4614X-102-152LF Specifications

Series 4600X
Package Bulk
Part Status Active
Circuit Type Isolated
Resistance (Ohms) 1.5k
Tolerance ±2%
Number of Resistors 7
Resistor Matching Ratio -
Resistor-Ratio-Drift -
Number of Pins 14
Power Per Element 300mW
Temperature Coefficient ±100ppm/°C
Operating Temperature -55°C ~ 125°C
Applications -
Mounting Type Through Hole
Package / Case 14-SIP
Supplier Device Package 14-SIP
Size / Dimension 1.398" L x 0.098" W (35.51mm x 2.49mm)
Height - Seated (Max) 0.200" (5.08mm)

Buying Guide

Choosing Resistors

When selecting a chip resistor, match four parameters in order of impact: resistance value and tolerance (5% suffices for pulls and straps; 1% or better for precision dividers), power rating (0603 standard is 0.1 W — derate 50% for continuous duty in enclosed assemblies), temperature coefficient (±100~200 ppm/°C typical for thick film; use thin film below ±50 ppm/°C where stability matters), and packaging (tape & reel for automated assembly, cut tape for prototyping). For zero-ohm jumpers, verify the maximum continuous current — most 0603 jumpers handle 1–2 A. In humid or automotive environments, prefer moisture-resistant coatings and AEC-Q200-qualified parts. Higher voltages need larger cases or anti-surge (thick-film surge-resistant) constructions, since arcing and creepage limits scale with package geometry.

Same Manufacturer

J.W. Miller / Bourns Parts in Stock

Request a Quote

Need 4614X-102-152LF or an alternative?

Send your quantity — our team replies with pricing and lead time within 24 hours, from franchised channels only.