4116R-2-332LF J.W. Miller / Bourns component image

4116R-2-332LF

In Stock

J.W. Miller / Bourns logo J.W. Miller / Bourns · franchised distributor

RES ARRAY 15 RES 3.3K OHM 16DIP

Listed in Resistor Networks, Arrays

3,196 pcs in stock ships same day before 6pm

from $0.5731

Quantity Unit Price
1 - 9 $1.5800
10 - 24 $1.3934
25 - 49 $1.2809
50 - 99 $1.1687
100 - 249 $1.0113
250 - 499 $0.8540
500 - 999 $0.7192
1,000 - 4,999 $0.5978
5,000+ $0.5731 BEST
100% Original Same-Day Ship 180-Day Warranty Worldwide Delivery

Overview

What is the 4116R-2-332LF?

4116R-2-332LF is a res array 15 res 3.3k ohm 16dip, featuring a resistance of 3.3k, a tolerance of ±2%, the 16-DIP (0.300", 7.62mm) case. Stocked at Xinyun IC — volume pricing and datasheet support available on request.

Same Series

J.W. Miller / Bourns Series Variants in Stock

50+ variants of this series in stock
Part Number Description Stock Unit Price Status
4116R-1-204 RES ARRAY 8 RES 200K OHM 16DIP 11,439 $0.4389 In Stock
4114R-1-270 RES ARRAY 7 RES 27 OHM 14DIP 7,720 $0.6517 In Stock
4114R-1-271LF RES ARRAY 7 RES 270 OHM 14DIP 3,050 $1.6600 In Stock
4116R-1-150LF RES ARRAY 8 RES 15 OHM 16DIP 7,414 $0.6783 In Stock
4108R-1-203LF RES ARRAY 4 RES 20K OHM 8DIP 4,319 $1.1704 In Stock
4116R-2-225 RES ARRAY 15 RES 2.2M OHM 16DIP 11,434 $0.4389 In Stock
4114R-2-333 RES ARRAY 13 RES 33K OHM 14DIP 7,705 $0.6517 In Stock
4116R-2-124LF RES ARRAY 15 RES 120K OHM 16DIP 7,417 $0.6783 In Stock
4114R-1-181 RES ARRAY 7 RES 180 OHM 14DIP 7,716 $0.6517 In Stock
4116R-1-390LF RES ARRAY 8 RES 39 OHM 16DIP 3,196 $1.5800 In Stock
More variants of this series in stock — browse the full category

Technical Parameters

4116R-2-332LF Specifications

Series 4100R
Package Tube
Part Status Active
Circuit Type Bussed
Resistance (Ohms) 3.3k
Tolerance ±2%
Number of Resistors 15
Resistor Matching Ratio -
Resistor-Ratio-Drift 50ppm/°C
Number of Pins 16
Power Per Element 125mW
Temperature Coefficient ±100ppm/°C
Operating Temperature -55°C ~ 125°C
Applications -
Mounting Type Through Hole
Package / Case 16-DIP (0.300", 7.62mm)
Supplier Device Package 16-DIP
Size / Dimension 0.865" L x 0.300" W (21.97mm x 7.62mm)
Height - Seated (Max) 0.185" (4.69mm)

Buying Guide

Choosing Resistors

When selecting a chip resistor, match four parameters in order of impact: resistance value and tolerance (5% suffices for pulls and straps; 1% or better for precision dividers), power rating (0603 standard is 0.1 W — derate 50% for continuous duty in enclosed assemblies), temperature coefficient (±100~200 ppm/°C typical for thick film; use thin film below ±50 ppm/°C where stability matters), and packaging (tape & reel for automated assembly, cut tape for prototyping). For zero-ohm jumpers, verify the maximum continuous current — most 0603 jumpers handle 1–2 A. In humid or automotive environments, prefer moisture-resistant coatings and AEC-Q200-qualified parts. Higher voltages need larger cases or anti-surge (thick-film surge-resistant) constructions, since arcing and creepage limits scale with package geometry.

Same Manufacturer

J.W. Miller / Bourns Parts in Stock

Request a Quote

Need 4116R-2-332LF or an alternative?

Send your quantity — our team replies with pricing and lead time within 24 hours, from franchised channels only.