277LMH350M2BF Cornell Dubilier Electronics component image

277LMH350M2BF

In Stock

Cornell Dubilier Electronics logo Cornell Dubilier Electronics · franchised distributor

CAP ALUM 270UF 20% 350V SNAP

Listed in Aluminum Electrolytic Capacitors

2,107 pcs in stock ships same day before 6pm

from $2.3118

Quantity Unit Price
1 - 1,007 $2.4219
1,008+ $2.3118 BEST
100% Original Same-Day Ship 180-Day Warranty Worldwide Delivery

Overview

What is the 277LMH350M2BF?

277LMH350M2BF is a cap alum 270uf 20% 350v snap, featuring a capacitance of 270 µF, a rated voltage of 350 V, a tolerance of ±20%, and the Radial, Can - Snap-In case. Stocked at Xinyun IC — volume pricing and datasheet support available on request.

Same Series

Cornell Dubilier Electronics Series Variants in Stock

10 variants of this series in stock
Part Number Description Stock Unit Price Status
827LMH400M2EH CAP ALUM 820UF 20% 400V SNAP 794 $6.6000 In Stock
337LMH250M2BD CAP ALUM 330UF 20% 250V SNAP 2,603 $1.9520 In Stock
477LMH250M2BF CAP ALUM 470UF 20% 250V SNAP 2,414 $2.1018 In Stock
158LMH250MZEF CAP ALUM 1500UF 20% 250V SNAP 1,214 $4.2305 In Stock
188LMH160MZCH CAP ALUM 1800UF 20% 160V SNAP 1,370 $3.7485 In Stock
187LMH400MZBE CAP ALUM 180UF 20% 400V SNAP 2,441 $2.0748 In Stock
189LMH050MZEG CAP ALUM 18000UF 20% 50V SNAP 978 $5.2881 In Stock
277LMH350MZDC CAP ALUM 270UF 20% 350V SNAP 2,104 $2.4161 In Stock
158LMH250MZEG CAP ALUM 1500UF 20% 250V SNAP 956 $5.4889 In Stock
+ 1 more variants in stock — browse the full category

Technical Parameters

277LMH350M2BF Specifications

Series LMH
Package Bulk
Part Status Active
Capacitance 270 µF
Tolerance ±20%
Voltage - Rated 350 V
ESR (Equivalent Series Resistance) 921.04mOhm @ 120Hz
Lifetime @ Temp. 2000 Hrs @ 105°C
Operating Temperature -40°C ~ 105°C
Polarization Polar
Ratings -
Applications General Purpose
Ripple Current @ Low Frequency 1.1 A @ 120 Hz
Ripple Current @ High Frequency 1.617 A @ 10 kHz
Impedance -
Lead Spacing 0.394" (10.00mm)
Size / Dimension 0.866" Dia (22.00mm)
Height - Seated (Max) 1.654" (42.00mm)
Surface Mount Land Size -
Mounting Type Through Hole
Package / Case Radial, Can - Snap-In

Buying Guide

Choosing Capacitors

Selecting a capacitor means matching the dielectric to the job: Class 1 ceramics (C0G/NP0) for timing, RF and precision filtering; Class 2 (X7R/X5R) for decoupling where value drift is tolerable; aluminum electrolytic or polymer for bulk storage; film for AC line and precision analog; tantalum/niobium where stable capacitance in a small footprint matters most. Order of checks: capacitance at operating voltage (MLCCs lose 30–60% of nominal value near rated voltage — derate to 50–80%), temperature range vs dielectric code (X7R = −55~+125°C), tolerance, and ripple current rating in power paths. For switching regulators, verify the ESR window the controller expects. In decoupling banks, mix a bulk MLCC with a small 100 nF per device pin for broadband impedance.

Cross-Brand Equivalents

Specs-Comparable Alternatives

Matched on package, key parameters and mounting
Part Number Description Stock Unit Price Match
EKMH351VNN391MR45S CAP ALUM 390UF 20% 350V SNAP 1,529 $3.3737 100%
B43252C4107M CAP ALUM 100UF 20% 350V SNAP 3,043 $1.6694 100%
EKMR351VSN271MQ30S CAP ALUM 270UF 20% 350V SNAP 1,173 $4.4184 100%
381LQ221M350H032 CAP ALUM 220UF 20% 350V SNAP 1,418 $3.6000 100%
EKMQ351VSN271MR25S CAP ALUM 270UF 20% 350V SNAP 1,156 $4.4400 100%
B43252A4567M CAP ALUM 560UF 20% 350V SNAP 799 $6.5520 100%
Alternatives verified in stock at Xinyun IC Verify dielectric and reflow profile against the datasheet before release

Same Manufacturer

Cornell Dubilier Electronics Parts in Stock

Request a Quote

Need 277LMH350M2BF or an alternative?

Send your quantity — our team replies with pricing and lead time within 24 hours, from franchised channels only.