187LMH400MZBE Cornell Dubilier Electronics component image

187LMH400MZBE

In Stock

Cornell Dubilier Electronics logo Cornell Dubilier Electronics · franchised distributor

CAP ALUM 180UF 20% 400V SNAP

Listed in Aluminum Electrolytic Capacitors

2,441 pcs in stock ships same day before 6pm

from $2.0748

Quantity Unit Price
1 - 999 $2.0748 BEST
1,000+ $2.0748 BEST
100% Original Same-Day Ship 180-Day Warranty Worldwide Delivery

Overview

What is the 187LMH400MZBE?

187LMH400MZBE is a cap alum 180uf 20% 400v snap, featuring a capacitance of 180 µF, a rated voltage of 400 V, a tolerance of ±20%, and the Radial, Can - Snap-In case. Available from Xinyun IC with immediate dispatch and a 180-day warranty.

Same Series

Cornell Dubilier Electronics Series Variants in Stock

10 variants of this series in stock
Part Number Description Stock Unit Price Status
827LMH400M2EH CAP ALUM 820UF 20% 400V SNAP 794 $6.6000 In Stock
337LMH250M2BD CAP ALUM 330UF 20% 250V SNAP 2,603 $1.9520 In Stock
477LMH250M2BF CAP ALUM 470UF 20% 250V SNAP 2,414 $2.1018 In Stock
277LMH350M2BF CAP ALUM 270UF 20% 350V SNAP 2,107 $2.4219 In Stock
158LMH250MZEF CAP ALUM 1500UF 20% 250V SNAP 1,214 $4.2305 In Stock
188LMH160MZCH CAP ALUM 1800UF 20% 160V SNAP 1,370 $3.7485 In Stock
189LMH050MZEG CAP ALUM 18000UF 20% 50V SNAP 978 $5.2881 In Stock
277LMH350MZDC CAP ALUM 270UF 20% 350V SNAP 2,104 $2.4161 In Stock
158LMH250MZEG CAP ALUM 1500UF 20% 250V SNAP 956 $5.4889 In Stock
+ 1 more variants in stock — browse the full category

Technical Parameters

187LMH400MZBE Specifications

Series LMH
Package Bulk
Part Status Active
Capacitance 180 µF
Tolerance ±20%
Voltage - Rated 400 V
ESR (Equivalent Series Resistance) 1.38155Ohm @ 120Hz
Lifetime @ Temp. 2000 Hrs @ 105°C
Operating Temperature -25°C ~ 105°C
Polarization Polar
Ratings -
Applications General Purpose
Ripple Current @ Low Frequency 950 mA @ 120 Hz
Ripple Current @ High Frequency 1.3965 A @ 50 kHz
Impedance -
Lead Spacing 0.394" (10.00mm)
Size / Dimension 0.866" Dia (22.00mm)
Height - Seated (Max) 1.457" (37.00mm)
Surface Mount Land Size -
Mounting Type Through Hole
Package / Case Radial, Can - Snap-In

Buying Guide

Choosing Capacitors

Selecting a capacitor means matching the dielectric to the job: Class 1 ceramics (C0G/NP0) for timing, RF and precision filtering; Class 2 (X7R/X5R) for decoupling where value drift is tolerable; aluminum electrolytic or polymer for bulk storage; film for AC line and precision analog; tantalum/niobium where stable capacitance in a small footprint matters most. Order of checks: capacitance at operating voltage (MLCCs lose 30–60% of nominal value near rated voltage — derate to 50–80%), temperature range vs dielectric code (X7R = −55~+125°C), tolerance, and ripple current rating in power paths. For switching regulators, verify the ESR window the controller expects. In decoupling banks, mix a bulk MLCC with a small 100 nF per device pin for broadband impedance.

Cross-Brand Equivalents

Specs-Comparable Alternatives

Matched on package, key parameters and mounting
Part Number Description Stock Unit Price Match
LAK2G151MELC25 CAP ALUM 150UF 20% 400V SNAP 1,332 $3.8872 100%
LAK2G101MELC20 CAP ALUM 100UF 20% 400V SNAP 1,692 $3.0447 100%
400SXC47MEFC20X25 CAP ALUM 47UF 20% 400V SNAP 898 $5.8800 100%
LAK2G330MELZ20 CAP ALUM 33UF 20% 400V SNAP 3,096 $1.6409 100%
400SXC330MEFC30X45 CAP ALUM 330UF 20% 400V SNAP 856 $6.1320 100%
400MXH390MEFC30X35 CAP ALUM 390UF 20% 400V SNAP 1,212 $4.3018 100%
Alternatives verified in stock at Xinyun IC Verify dielectric and reflow profile against the datasheet before release

Same Manufacturer

Cornell Dubilier Electronics Parts in Stock

Request a Quote

Need 187LMH400MZBE or an alternative?

Send your quantity — our team replies with pricing and lead time within 24 hours, from franchised channels only.