2118731-2 TE Connectivity AMP Connectors component image

2118731-2

In Stock

TE Connectivity AMP Connectors logo TE Connectivity AMP Connectors · franchised distributor

RF SHIELD 1.52" X 2.02" SMD

Listed in RF Shields

7,853 pcs in stock ships same day before 6pm

from $0.2167

Quantity Unit Price
1 - 9 $0.6400
10 - 24 $0.5615
25 - 99 $0.4977
100 - 249 $0.4335
250 - 499 $0.3772
500 - 999 $0.3211
1,000 - 2,499 $0.2568
2,500 - 4,999 $0.2328
5,000+ $0.2167 BEST
100% Original Same-Day Ship 180-Day Warranty Worldwide Delivery

Overview

What is the 2118731-2?

2118731-2 is a rf shield 1.52" x 2.02" smd, featuring the Bulk package. Stocked at Xinyun IC — volume pricing and datasheet support available on request.

Same Series

TE Connectivity AMP Connectors Series Variants in Stock

42 variants of this series in stock
Part Number Description Stock Unit Price Status
2118715-2 RF SHIELD 0.665" X 0.665" SMD 4,719 $1.0700 In Stock
2118713-2 RF SHIELD 0.516" X 0.554" SMD 10,688 $0.4700 In Stock
2118709-2 RF SHIELD 1.26" X 1.26" SMD 1PC 4,857 $1.0400 In Stock
2118730-2 RF SHIELD 1.201" X 1.732" SMD 4,709 $1.0700 In Stock
2118724-2 RF SHIELD 1.326" X 1.45" SMD 4,356 $1.1600 In Stock
2118708-2 RF SHIELD 1.032"X1.032" SMD 1PC 5,476 $0.9200 In Stock
2118708-4 RF SHIELD 1.032"X1.032" SMD 1PC 3,160 $1.6000 In Stock
2118725-2 RF SHIELD 1.77" X 1.77" SMD 7,845 $0.6400 In Stock
2118723-4 RF SHIELD 1.346" X 1.47" SMD 3,699 $1.3700 In Stock
2118713-4 RF SHIELD 0.516" X 0.554" SMD 7,283 $0.6900 In Stock
+ 32 more variants in stock — browse the full category

Technical Parameters

2118731-2 Specifications

Series -
Package Bulk
Part Status Active
Type Cover
Height - Overall 0.079" (2.00mm)
Length - Overall 2.020" (51.30mm)
Width - Overall 1.520" (38.60mm)
Ventilation Vented
Mounting Type Surface Mount

Buying Guide

Choosing RF/IF and RFID

RF component selection lives and dies by the frequency-conditioned numbers. Judge filters by insertion loss and return loss at the band edges, not center; check passband ripple for modulation-sensitive links. Baluns must cover the full band with amplitude balance ±0.5 dB and phase ±5° or your modulation quality (EVM) degrades. For amplifiers, distinguish small-signal gain from compression: back off 8–10 dB from P1dB for linear modulation, more for high-order QAM. Verify 50 Ω match assumptions — antenna ports and differential chains need their matching networks at design frequency. Finally, respect PCB layout as part of the component: ground vias, pad geometry and trace length all sit inside the signal path above ~1 GHz; datasheet evaluation-board layouts are the safest reference.

Same Manufacturer

TE Connectivity AMP Connectors Parts in Stock

Request a Quote

Need 2118731-2 or an alternative?

Send your quantity — our team replies with pricing and lead time within 24 hours, from franchised channels only.