2118715-2 TE Connectivity AMP Connectors component image

2118715-2

In Stock

TE Connectivity AMP Connectors logo TE Connectivity AMP Connectors · franchised distributor

RF SHIELD 0.665" X 0.665" SMD

Listed in RF Shields

4,719 pcs in stock ships same day before 6pm

from $0.3244

Quantity Unit Price
1 - 9 $1.0700
10 - 24 $0.8945
25 - 99 $0.7832
100 - 249 $0.6713
250 - 499 $0.5817
500 - 999 $0.4922
1,000 - 2,499 $0.3804
2,500 - 4,999 $0.3468
5,000+ $0.3244 BEST
100% Original Same-Day Ship 180-Day Warranty Worldwide Delivery

Overview

What is the 2118715-2?

2118715-2 is a rf shield 0.665" x 0.665" smd, featuring the Bulk package. Available from Xinyun IC with immediate dispatch and a 180-day warranty.

Same Series

TE Connectivity AMP Connectors Series Variants in Stock

42 variants of this series in stock
Part Number Description Stock Unit Price Status
2118713-2 RF SHIELD 0.516" X 0.554" SMD 10,688 $0.4700 In Stock
2118709-2 RF SHIELD 1.26" X 1.26" SMD 1PC 4,857 $1.0400 In Stock
2118730-2 RF SHIELD 1.201" X 1.732" SMD 4,709 $1.0700 In Stock
2118724-2 RF SHIELD 1.326" X 1.45" SMD 4,356 $1.1600 In Stock
2118708-2 RF SHIELD 1.032"X1.032" SMD 1PC 5,476 $0.9200 In Stock
2118708-4 RF SHIELD 1.032"X1.032" SMD 1PC 3,160 $1.6000 In Stock
2118725-2 RF SHIELD 1.77" X 1.77" SMD 7,845 $0.6400 In Stock
2118723-4 RF SHIELD 1.346" X 1.47" SMD 3,699 $1.3700 In Stock
2118713-4 RF SHIELD 0.516" X 0.554" SMD 7,283 $0.6900 In Stock
2118721-4 RF SHIELD 1.02" X 1.52" SMD 4,357 $1.1600 In Stock
+ 32 more variants in stock — browse the full category

Technical Parameters

2118715-2 Specifications

Series -
Package Bulk
Part Status Active
Type Cover
Height - Overall 0.079" (2.00mm)
Length - Overall 0.665" (16.90mm)
Width - Overall 0.665" (16.90mm)
Ventilation Vented
Mounting Type Surface Mount

Buying Guide

Choosing RF/IF and RFID

RF component selection lives and dies by the frequency-conditioned numbers. Judge filters by insertion loss and return loss at the band edges, not center; check passband ripple for modulation-sensitive links. Baluns must cover the full band with amplitude balance ±0.5 dB and phase ±5° or your modulation quality (EVM) degrades. For amplifiers, distinguish small-signal gain from compression: back off 8–10 dB from P1dB for linear modulation, more for high-order QAM. Verify 50 Ω match assumptions — antenna ports and differential chains need their matching networks at design frequency. Finally, respect PCB layout as part of the component: ground vias, pad geometry and trace length all sit inside the signal path above ~1 GHz; datasheet evaluation-board layouts are the safest reference.

Same Manufacturer

TE Connectivity AMP Connectors Parts in Stock

Request a Quote

Need 2118715-2 or an alternative?

Send your quantity — our team replies with pricing and lead time within 24 hours, from franchised channels only.