2-6-1182 3M component image

2-6-1182

In Stock

3M logo 3M · franchised distributor

RF EMI SHIELDING TAPE 18'X2"

Listed in RFI and EMI - Shielding and Absorbing Materials

100 pcs in stock ships same day before 6pm

from $71.9387

Quantity Unit Price
1 - 9 $89.2700
10 - 24 $84.0160
25 - 49 $81.3904
50 - 99 $76.1396
100+ $71.9387 BEST
100% Original Same-Day Ship 180-Day Warranty Worldwide Delivery

Overview

What is the 2-6-1182?

2-6-1182 is a rf emi shielding tape 18'x2", featuring the Box package. Stocked at Xinyun IC — volume pricing and datasheet support available on request.

Same Series

3M Series Variants in Stock

15 variants of this series in stock
Part Number Description Stock Unit Price Status
1182 X 6" RF EMI SHIELDING TAPE 54'X6" 3,580 RFQ In Stock
1/2-6-1182 RF EMI SHIELDING TAPE 18'X0.5" 213 $27.2500 In Stock
3/4-6-1182 RF EMI SHIELDING TAPE 18'X0.75" 160 $40.4800 In Stock
1182-1/4"X18YD RF EMI SHIELDING TAPE 54'X0.25" 281 $21.5600 In Stock
1182-3/4"X18YD RF EMI SHIELDING TAPE 54'X0.75" 138 $55.2500 In Stock
1-6-1182 RF EMI SHIELDING TAPE 18'X1" 152 $44.6400 In Stock
1182-1/2"X18YD RF EMI SHIELDING TAPE 54'X0.5" 162 $39.9400 In Stock
4-6-1182 RF EMI SHIELDING TAPE 18'X4" 78 $149.3900 In Stock
11.5X12-6-1182 RF EMI SHLDING SHEET 12"X11.5" 212 $28.0000 In Stock
11.5-6-1182 RF EMI SHLDING SHEET 18'X11.5" 61 $322.1000 In Stock
+ 5 more variants in stock — browse the full category

Technical Parameters

2-6-1182 Specifications

Series 1182
Package Box
Part Status Active
Type Shielding Tape
Shape -
Length 18.000' (5.50m)
Width 2.000" (50.80mm)
Thickness - Overall 0.004" (0.09mm)
Operating Temperature -
Adhesive Conductive, Double Sided
Material Copper Foil

Buying Guide

Choosing RF/IF and RFID

RF component selection lives and dies by the frequency-conditioned numbers. Judge filters by insertion loss and return loss at the band edges, not center; check passband ripple for modulation-sensitive links. Baluns must cover the full band with amplitude balance ±0.5 dB and phase ±5° or your modulation quality (EVM) degrades. For amplifiers, distinguish small-signal gain from compression: back off 8–10 dB from P1dB for linear modulation, more for high-order QAM. Verify 50 Ω match assumptions — antenna ports and differential chains need their matching networks at design frequency. Finally, respect PCB layout as part of the component: ground vias, pad geometry and trace length all sit inside the signal path above ~1 GHz; datasheet evaluation-board layouts are the safest reference.

Same Manufacturer

3M Parts in Stock

Request a Quote

Need 2-6-1182 or an alternative?

Send your quantity — our team replies with pricing and lead time within 24 hours, from franchised channels only.