1WRD10 NTE Electronics, Inc. component image

1WRD10

In Stock

NTE Electronics, Inc. logo NTE Electronics, Inc. · franchised distributor

RES-1W 0.10 OHM 5%

Listed in Through Hole Resistors

5,039 pcs in stock ships same day before 6pm

from $1.0000

Quantity Unit Price
1+ $1.0000 BEST
100% Original Same-Day Ship 180-Day Warranty Worldwide Delivery

Overview

What is the 1WRD10?

1WRD10 is a res-1w 0.10 ohm 5%, featuring a power rating of 1W, a tolerance of ±5%, a Wirewound composition, and the Axial case. Stocked at Xinyun IC — volume pricing and datasheet support available on request.

Same Series

NTE Electronics, Inc. Series Variants in Stock

42 variants of this series in stock
Part Number Description Stock Unit Price Status
1WR5D0 RES-1W 5 OHM 5% 7,504 $0.6700 In Stock
3WR010 RES-3W 10 OHM 5% 10,043 $0.5000 In Stock
1WR125 RES-1W 250 OHM 5% 6,712 $0.7500 In Stock
1WR010 RES-1W 10 OHM 5% 7,503 $0.6700 In Stock
1WRD50 RES-1W 0.50 OHM 5% 5,048 $1.0000 In Stock
1WRD25 RES-1W 0.25 OHM 5% 5,041 $1.0000 In Stock
3WR020 RES-3W 20 OHM 5% 10,042 $0.5000 In Stock
3WR210 RES-3W 1K OHM 5% 10,038 $0.5000 In Stock
1WRD13 RES-1W 0.13 OHM 5% 5,031 $1.0000 In Stock
1WRD33 RES-1W 0.33 OHM 5% 5,036 $1.0000 In Stock
+ 32 more variants in stock — browse the full category

Technical Parameters

1WRD10 Specifications

Series -
Package Bag
Part Status Active
Resistance 100 mOhms
Tolerance ±5%
Power (Watts) 1W
Composition Wirewound
Features -
Temperature Coefficient ±90ppm/°C
Operating Temperature -65°C ~ 250°C
Package / Case Axial
Supplier Device Package Axial
Size / Dimension 0.094" Dia x 0.437" L (2.39mm x 11.10mm)
Height - Seated (Max) -
Number of Terminations 2
Failure Rate -

Buying Guide

Choosing Resistors

When selecting a chip resistor, match four parameters in order of impact: resistance value and tolerance (5% suffices for pulls and straps; 1% or better for precision dividers), power rating (0603 standard is 0.1 W — derate 50% for continuous duty in enclosed assemblies), temperature coefficient (±100~200 ppm/°C typical for thick film; use thin film below ±50 ppm/°C where stability matters), and packaging (tape & reel for automated assembly, cut tape for prototyping). For zero-ohm jumpers, verify the maximum continuous current — most 0603 jumpers handle 1–2 A. In humid or automotive environments, prefer moisture-resistant coatings and AEC-Q200-qualified parts. Higher voltages need larger cases or anti-surge (thick-film surge-resistant) constructions, since arcing and creepage limits scale with package geometry.

Cross-Brand Equivalents

Specs-Comparable Alternatives

Matched on package, key parameters and mounting
Part Number Description Stock Unit Price Match
WW2JBR100 RES 0.1 OHM 1.5W 5% AXIAL 19,031 $0.2633 81%
41FR10 RES 0.1 OHM 1W 1% AXIAL 1,762 $2.8900 75%
WW12JTR100 RES 0.1 OHM 0.4W 5% AXIAL 15,893 $0.3152 67%
WW12JBR100 RES 0.1 OHM 0.4W 5% AXIAL 15,664 $0.3200 67%
55JR10E RES 100M OHM 5% 5W AXIAL 14,500 $0.3458 67%
40JR10E RES 100M OHM 5% 10W AXIAL 1,437 $3.5800 67%
Alternatives verified in stock at Xinyun IC Verify dielectric and reflow profile against the datasheet before release

Same Manufacturer

NTE Electronics, Inc. Parts in Stock

Request a Quote

Need 1WRD10 or an alternative?

Send your quantity — our team replies with pricing and lead time within 24 hours, from franchised channels only.