1WR125 NTE Electronics, Inc. component image

1WR125

In Stock

NTE Electronics, Inc. logo NTE Electronics, Inc. · franchised distributor

RES-1W 250 OHM 5%

Listed in Through Hole Resistors

6,712 pcs in stock ships same day before 6pm

from $0.7500

Quantity Unit Price
1+ $0.7500 BEST
100% Original Same-Day Ship 180-Day Warranty Worldwide Delivery

Overview

What is the 1WR125?

1WR125 is a res-1w 250 ohm 5%, featuring a power rating of 1W, a tolerance of ±5%, a Wirewound composition, and the Axial case. Stocked at Xinyun IC — volume pricing and datasheet support available on request.

Same Series

NTE Electronics, Inc. Series Variants in Stock

42 variants of this series in stock
Part Number Description Stock Unit Price Status
1WR5D0 RES-1W 5 OHM 5% 7,504 $0.6700 In Stock
3WR010 RES-3W 10 OHM 5% 10,043 $0.5000 In Stock
1WR010 RES-1W 10 OHM 5% 7,503 $0.6700 In Stock
1WRD10 RES-1W 0.10 OHM 5% 5,039 $1.0000 In Stock
1WRD50 RES-1W 0.50 OHM 5% 5,048 $1.0000 In Stock
1WRD25 RES-1W 0.25 OHM 5% 5,041 $1.0000 In Stock
3WR020 RES-3W 20 OHM 5% 10,042 $0.5000 In Stock
3WR210 RES-3W 1K OHM 5% 10,038 $0.5000 In Stock
1WRD13 RES-1W 0.13 OHM 5% 5,031 $1.0000 In Stock
1WRD33 RES-1W 0.33 OHM 5% 5,036 $1.0000 In Stock
+ 32 more variants in stock — browse the full category

Technical Parameters

1WR125 Specifications

Series -
Package Bag
Part Status Active
Resistance 250 Ohms
Tolerance ±5%
Power (Watts) 1W
Composition Wirewound
Features -
Temperature Coefficient ±30ppm/°C
Operating Temperature -65°C ~ 250°C
Package / Case Axial
Supplier Device Package Axial
Size / Dimension 0.094" Dia x 0.437" L (2.39mm x 11.10mm)
Height - Seated (Max) -
Number of Terminations 2
Failure Rate -

Buying Guide

Choosing Resistors

When selecting a chip resistor, match four parameters in order of impact: resistance value and tolerance (5% suffices for pulls and straps; 1% or better for precision dividers), power rating (0603 standard is 0.1 W — derate 50% for continuous duty in enclosed assemblies), temperature coefficient (±100~200 ppm/°C typical for thick film; use thin film below ±50 ppm/°C where stability matters), and packaging (tape & reel for automated assembly, cut tape for prototyping). For zero-ohm jumpers, verify the maximum continuous current — most 0603 jumpers handle 1–2 A. In humid or automotive environments, prefer moisture-resistant coatings and AEC-Q200-qualified parts. Higher voltages need larger cases or anti-surge (thick-film surge-resistant) constructions, since arcing and creepage limits scale with package geometry.

Cross-Brand Equivalents

Specs-Comparable Alternatives

Matched on package, key parameters and mounting
Part Number Description Stock Unit Price Match
CW005250R0JE73 RES 250 OHM 6.5W 5% AXIAL 4,144 $1.2200 67%
CW02C250R0JE70 RES 250 OHM 3.25W 5% AXIAL 13,411 $0.3737 67%
ALSR03250R0JE12 RES 250 OHM 3W 5% AXIAL 4,976 $1.0125 67%
CW02B250R0JE70 RES 250 OHM 3.75W 5% AXIAL 5,140 $0.9800 67%
25J250 RES 250 OHM 5W 5% AXIAL 3,117 $1.6200 67%
20J250 RES 250 OHM 10W 5% AXIAL 2,298 $2.2200 67%
Alternatives verified in stock at Xinyun IC Verify dielectric and reflow profile against the datasheet before release

Same Manufacturer

NTE Electronics, Inc. Parts in Stock

Request a Quote

Need 1WR125 or an alternative?

Send your quantity — our team replies with pricing and lead time within 24 hours, from franchised channels only.