1183 1" 3M component image

1183 1"

In Stock

3M logo 3M · franchised distributor

RF EMI SHIELDING TAPE 54'X1"

Listed in RFI and EMI - Shielding and Absorbing Materials

119 pcs in stock ships same day before 6pm

from $53.7485

Quantity Unit Price
1 - 9 $63.9000
10 - 24 $60.1387
25 - 99 $56.3798
100+ $53.7485 BEST
100% Original Same-Day Ship 180-Day Warranty Worldwide Delivery

Overview

What is the 1183 1"?

1183-1 is a rf emi shielding tape 54'x1", featuring the Box package. Stocked at Xinyun IC — volume pricing and datasheet support available on request.

Same Series

3M Series Variants in Stock

18 variants of this series in stock
Part Number Description Stock Unit Price Status
1183-3/8"X18YD RF EMI SHIELDING TAPE 54'X0.38" 3,853 RFQ In Stock
2-6-1183 RF EMI SHIELDING TAPE 18'X2" 100 $83.5400 In Stock
3/4-6-1183 RF EMI SHIELDING TAPE 18'X0.75" 176 $37.8700 In Stock
11.5X12-6-1183 RF EMI SHLDING SHEET 12"X11.5" 221 $26.2000 In Stock
1183-3/4X18YD RF EMI SHIELDING TAPE 54'X0.75" 132 $49.9800 In Stock
1-6-1183 RF EMI SHIELDING TAPE 18'X1" 150 $46.4100 In Stock
1/2-6-1183 RF EMI SHIELDING TAPE 54'X0.5" 218 $27.7700 In Stock
1183 1/4" RF EMI SHIELDING TAPE 54'X0.25" 262 $22.2000 In Stock
5/8"-18YDS-1183 RF EMI SHLDING TAPE 54'X0.625" 160 $44.5200 In Stock
11.5-6-1183 RF EMI SHLDING SHEET 18'X11.5" 47 $301.4100 In Stock
+ 8 more variants in stock — browse the full category

Technical Parameters

1183 1" Specifications

Series 1183
Package Box
Part Status Active
Type Shielding Tape
Shape -
Length 54.000' (16.50m)
Width 1.000" (25.40mm)
Thickness - Overall 0.003" (0.07mm)
Operating Temperature -40°C ~ 130°C
Adhesive Conductive, Single Sided
Material Tin-Plated Copper Foil

Buying Guide

Choosing RF/IF and RFID

RF component selection lives and dies by the frequency-conditioned numbers. Judge filters by insertion loss and return loss at the band edges, not center; check passband ripple for modulation-sensitive links. Baluns must cover the full band with amplitude balance ±0.5 dB and phase ±5° or your modulation quality (EVM) degrades. For amplifiers, distinguish small-signal gain from compression: back off 8–10 dB from P1dB for linear modulation, more for high-order QAM. Verify 50 Ω match assumptions — antenna ports and differential chains need their matching networks at design frequency. Finally, respect PCB layout as part of the component: ground vias, pad geometry and trace length all sit inside the signal path above ~1 GHz; datasheet evaluation-board layouts are the safest reference.

Same Manufacturer

3M Parts in Stock

Request a Quote

Need 1183 1" or an alternative?

Send your quantity — our team replies with pricing and lead time within 24 hours, from franchised channels only.