101-10KB Riedon component image

101-10KB

In Stock

Riedon logo Riedon · franchised distributor

RES 10K OHM 1/4W 0.1% AXIAL

Listed in Through Hole Resistors

1,381 pcs in stock ships same day before 6pm

from $3.7220

Quantity Unit Price
1 - 49 $3.7220 BEST
50+ $3.7220 BEST
100% Original Same-Day Ship 180-Day Warranty Worldwide Delivery

Overview

What is the 101-10KB?

101-10KB is a res 10k ohm 1/4w 0.1% axial, featuring a power rating of 0.25W, 1/4W, a tolerance of ±0.1%, a Wirewound composition, and the Axial case. Stocked at Xinyun IC — volume pricing and datasheet support available on request.

Same Series

Riedon Series Variants in Stock

50+ variants of this series in stock
Part Number Description Stock Unit Price Status
SM15-2K5X RES 2.5K OHM 0.175W 0.01% AXIAL 838 $6.3000 In Stock
SM10-5KX RES 5K OHM 0.3W 0.01% RADIAL 839 $6.3000 In Stock
SM10-500RB RES 500 OHM 0.3W 0.1% RADIAL 1,065 $4.8400 In Stock
101-50KX RES 50K OHM 1/4W 0.01% AXIAL 830 $6.3000 In Stock
101-5KX RES 5K OHM 1/4W 0.01% AXIAL 826 $6.3000 In Stock
SM10-1KB RES 1K OHM 0.3W 0.1% RADIAL 1,066 $4.8400 In Stock
SM10-1KX RES 1K OHM 0.3W 0.01% RADIAL 829 $6.3000 In Stock
SM15-350RX RES 350 OHM 0.175W 0.01% AXIAL 826 $6.3000 In Stock
SM10-25KB RES 25K OHM 0.3W 0.1% RADIAL 1,387 $3.7220 In Stock
SM15-250RX RES 250 OHM 0.175W 0.01% AXIAL 823 $6.3000 In Stock
More variants of this series in stock — browse the full category

Technical Parameters

101-10KB Specifications

Series 100/SM/PC Precision
Package Bulk
Part Status Active
Resistance 10 kOhms
Tolerance ±0.1%
Power (Watts) 0.25W, 1/4W
Composition Wirewound
Features Flame Proof, Moisture Resistant, Non-Inductive, Safety
Temperature Coefficient ±10ppm/°C
Operating Temperature -55°C ~ 145°C
Package / Case Axial
Supplier Device Package -
Size / Dimension 0.252" Dia x 0.500" L (6.40mm x 12.70mm)
Height - Seated (Max) -
Number of Terminations 2
Failure Rate -

Buying Guide

Choosing Resistors

When selecting a chip resistor, match four parameters in order of impact: resistance value and tolerance (5% suffices for pulls and straps; 1% or better for precision dividers), power rating (0603 standard is 0.1 W — derate 50% for continuous duty in enclosed assemblies), temperature coefficient (±100~200 ppm/°C typical for thick film; use thin film below ±50 ppm/°C where stability matters), and packaging (tape & reel for automated assembly, cut tape for prototyping). For zero-ohm jumpers, verify the maximum continuous current — most 0603 jumpers handle 1–2 A. In humid or automotive environments, prefer moisture-resistant coatings and AEC-Q200-qualified parts. Higher voltages need larger cases or anti-surge (thick-film surge-resistant) constructions, since arcing and creepage limits scale with package geometry.

Cross-Brand Equivalents

Specs-Comparable Alternatives

Matched on package, key parameters and mounting
Part Number Description Stock Unit Price Match
MR10610K000BAE66 RESISTOR 10K OHM 1/4W .1% WW 1,392 $3.6750 100%
SM15-10KB RES 10K OHM 0.175W 0.1% AXIAL 1,392 $3.7220 100%
MR10210K000BAE66 RES 10K OHM 0.175W 0.1% AXIAL 1,395 $3.6750 100%
MR10610K000AAE66 RESISTOR 10K OHM 1/4W .05% WW 1,279 $4.0075 76%
MR10210K000AAE66 RES 10K OHM 0.175W 0.05% AXIAL 1,283 $4.0075 76%
SM15-10KX RES 10K OHM 0.175W 0.01% AXIAL 831 $6.3000 63%
Alternatives verified in stock at Xinyun IC Verify dielectric and reflow profile against the datasheet before release

Same Manufacturer

Riedon Parts in Stock

Request a Quote

Need 101-10KB or an alternative?

Send your quantity — our team replies with pricing and lead time within 24 hours, from franchised channels only.