SM10-5KX Riedon component image

SM10-5KX

In Stock

Riedon logo Riedon · franchised distributor

RES 5K OHM 0.3W 0.01% RADIAL

Listed in Through Hole Resistors

839 pcs in stock ships same day before 6pm

from $3.0542

Quantity Unit Price
1 - 9 $6.3000
10 - 24 $5.6960
25 - 49 $5.2116
50 - 99 $4.8480
100 - 249 $4.2420
250 - 499 $3.6360
500 - 999 $3.3330
1,000+ $3.0542 BEST
100% Original Same-Day Ship 180-Day Warranty Worldwide Delivery

Overview

What is the SM10-5KX?

SM10-5KX is a res 5k ohm 0.3w 0.01% radial, featuring a power rating of 0.3W, a tolerance of ±0.01%, a Wirewound composition, and the Radial case. It is in stock at Xinyun IC with tiered pricing and same-day worldwide shipping.

Same Series

Riedon Series Variants in Stock

50+ variants of this series in stock
Part Number Description Stock Unit Price Status
SM15-2K5X RES 2.5K OHM 0.175W 0.01% AXIAL 838 $6.3000 In Stock
SM10-500RB RES 500 OHM 0.3W 0.1% RADIAL 1,065 $4.8400 In Stock
101-50KX RES 50K OHM 1/4W 0.01% AXIAL 830 $6.3000 In Stock
101-5KX RES 5K OHM 1/4W 0.01% AXIAL 826 $6.3000 In Stock
SM10-1KB RES 1K OHM 0.3W 0.1% RADIAL 1,066 $4.8400 In Stock
SM10-1KX RES 1K OHM 0.3W 0.01% RADIAL 829 $6.3000 In Stock
SM15-350RX RES 350 OHM 0.175W 0.01% AXIAL 826 $6.3000 In Stock
SM10-25KB RES 25K OHM 0.3W 0.1% RADIAL 1,387 $3.7220 In Stock
SM15-250RX RES 250 OHM 0.175W 0.01% AXIAL 823 $6.3000 In Stock
SM10-50KB RES 50K OHM 0.3W 0.1% RADIAL 1,573 $3.2568 In Stock
More variants of this series in stock — browse the full category

Technical Parameters

SM10-5KX Specifications

Series 100/SM/PC Precision
Package Bulk
Part Status Active
Resistance 5 kOhms
Tolerance ±0.01%
Power (Watts) 0.3W
Composition Wirewound
Features Flame Proof, Moisture Resistant, Non-Inductive, Safety
Temperature Coefficient ±10ppm/°C
Operating Temperature -55°C ~ 145°C
Package / Case Radial
Supplier Device Package -
Size / Dimension 0.299" L x 0.102" W (7.60mm x 2.60mm)
Height - Seated (Max) 0.344" (8.74mm)
Number of Terminations 2
Failure Rate -

Buying Guide

Choosing Resistors

When selecting a chip resistor, match four parameters in order of impact: resistance value and tolerance (5% suffices for pulls and straps; 1% or better for precision dividers), power rating (0603 standard is 0.1 W — derate 50% for continuous duty in enclosed assemblies), temperature coefficient (±100~200 ppm/°C typical for thick film; use thin film below ±50 ppm/°C where stability matters), and packaging (tape & reel for automated assembly, cut tape for prototyping). For zero-ohm jumpers, verify the maximum continuous current — most 0603 jumpers handle 1–2 A. In humid or automotive environments, prefer moisture-resistant coatings and AEC-Q200-qualified parts. Higher voltages need larger cases or anti-surge (thick-film surge-resistant) constructions, since arcing and creepage limits scale with package geometry.

Cross-Brand Equivalents

Specs-Comparable Alternatives

Matched on package, key parameters and mounting
Part Number Description Stock Unit Price Match
SM10-5KB RES 5K OHM 0.3W 0.1% RADIAL 1,571 $3.2568 75%
SM10-2K5X RES 2.5K OHM 0.3W 0.01% RADIAL 841 $6.3000 58%
SM10-10KX RES 10K OHM 0.3W 0.01% RADIAL 835 $6.3000 58%
Alternatives verified in stock at Xinyun IC Verify dielectric and reflow profile against the datasheet before release

Same Manufacturer

Riedon Parts in Stock

Request a Quote

Need SM10-5KX or an alternative?

Send your quantity — our team replies with pricing and lead time within 24 hours, from franchised channels only.