XBP24CDMPIS-001 Digi component image

XBP24CDMPIS-001

In Stock

Digi logo Digi · franchised distributor

RX TXRX MOD ISM>1GHZ TRC ANT SMD

Listed in RF Transceiver Modules and Modems

4,313 pcs in stock ships same day before 6pm

RFQ for pricing — volume discounts available for this part.

100% Original Same-Day Ship 180-Day Warranty Worldwide Delivery

Overview

What is the XBP24CDMPIS-001?

XBP24CDMPIS-001 is a rx txrx mod ism>1ghz trc ant smd, featuring a frequency of 2.4GHz, the Module case. Stocked at Xinyun IC — volume pricing and datasheet support available on request.

Same Series

Digi Series Variants in Stock

12 variants of this series in stock
Part Number Description Stock Unit Price Status
XBP24CDMWIT-001 RX TXRX MOD ISM>1GHZ WIRE ANT TH 187 $32.5600 In Stock
XBP24CDMRIS-001 RX TXRX MOD ISM > 1GHZ CAST SMD 3,815 RFQ In Stock
XB24CDMUIS-001 RX TXRX MOD ISM > 1GHZ U.FL SMD 263 $23.1000 In Stock
XBP24CDMUIS-001 RX TXRX MOD ISM > 1GHZ U.FL SMD 2,333 RFQ In Stock
XB24CDMPIS-001 RX TXRX MOD ISM>1GHZ TRC ANT SMD 249 $23.1000 In Stock
XBP24CDMPIT-001 RX TXRX MOD ISM>1GHZ TRC ANT SMD 3,413 RFQ In Stock
XB24CDMRIS-001 RX TXRX MOD ISM > 1GHZ CAST SMD 254 $23.1000 In Stock
XB24CDMWIT-001 RX TXRX MOD ISM>1GHZ WIRE ANT TH 261 $23.1000 In Stock
XB24CDMUIT-001 RX TXRX MOD ISM > 1GHZ U.FL SMD 256 $23.1000 In Stock
XB24CDMPIT-001 RX TXRX MOD ISM>1GHZ TRC ANT SMD 266 $23.1000 In Stock
+ 2 more variants in stock — browse the full category

Technical Parameters

XBP24CDMPIS-001 Specifications

Series XBee-Pro® DigiMesh® 2.4
Package Tray
Part Status Obsolete
RF Family/Standard General ISM > 1GHZ
Protocol -
Modulation DSSS
Frequency 2.4GHz
Data Rate 250kbps
Power - Output 18dBm
Sensitivity -101dBm
Serial Interfaces SPI, UART
Antenna Type Integrated, Trace
Utilized IC / Part EM357
Memory Size -
Voltage - Supply 2.7V ~ 3.6V
Current - Receiving 31mA
Current - Transmitting 120mA
Mounting Type Surface Mount
Operating Temperature -40°C ~ 85°C
Package / Case Module

Buying Guide

Choosing RF/IF and RFID

RF component selection lives and dies by the frequency-conditioned numbers. Judge filters by insertion loss and return loss at the band edges, not center; check passband ripple for modulation-sensitive links. Baluns must cover the full band with amplitude balance ±0.5 dB and phase ±5° or your modulation quality (EVM) degrades. For amplifiers, distinguish small-signal gain from compression: back off 8–10 dB from P1dB for linear modulation, more for high-order QAM. Verify 50 Ω match assumptions — antenna ports and differential chains need their matching networks at design frequency. Finally, respect PCB layout as part of the component: ground vias, pad geometry and trace length all sit inside the signal path above ~1 GHz; datasheet evaluation-board layouts are the safest reference.

Cross-Brand Equivalents

Specs-Comparable Alternatives

Matched on package, key parameters and mounting
Part Number Description Stock Unit Price Match
XBP24CARIS-001 RX TXRX MODULE 802.15.4 SMD 2,527 RFQ 100%
XBP24CDMPIT-001 RX TXRX MOD ISM>1GHZ TRC ANT SMD 3,413 RFQ 100%
XBP24CDMUIS-001 RX TXRX MOD ISM > 1GHZ U.FL SMD 2,333 RFQ 100%
XBP24CDMRIS-001 RX TXRX MOD ISM > 1GHZ CAST SMD 3,815 RFQ 100%
XBP24CAPIS-001 RX TXRX MOD 802.15.4 TRC ANT SMD 1,048 RFQ 100%
XB24-ACI-070 RX TXRX MODULE 802.15.4 CHIP SMD 1,339 RFQ 100%
Alternatives verified in stock at Xinyun IC Verify dielectric and reflow profile against the datasheet before release

Same Manufacturer

Digi Parts in Stock

Request a Quote

Need XBP24CDMPIS-001 or an alternative?

Send your quantity — our team replies with pricing and lead time within 24 hours, from franchised channels only.