WLCR005FE Ohmite component image

WLCR005FE

In Stock

Ohmite logo Ohmite · franchised distributor

RES 5M OHM 1% 2W AXIAL

Listed in Through Hole Resistors

3,790 pcs in stock ships same day before 6pm

RFQ for pricing — volume discounts available for this part.

100% Original Same-Day Ship 180-Day Warranty Worldwide Delivery

Overview

What is the WLCR005FE?

WLCR005FE is a res 5m ohm 1% 2w axial, featuring a power rating of 2W, a tolerance of ±1%, a Wirewound composition, and the Axial case. Stocked at Xinyun IC — volume pricing and datasheet support available on request.

Same Series

Ohmite Series Variants in Stock

47 variants of this series in stock
Part Number Description Stock Unit Price Status
WLCR010FET RES 10M OHM 1% 2W AXIAL 9,432 $0.5320 In Stock
WLCR025FET RES 25M OHM 1% 2W AXIAL 9,444 $0.5320 In Stock
WLAR025FET RES 25M OHM 1% 1/2W AXIAL 9,430 $0.5320 In Stock
WLCR050FET RES 50M OHM 1% 2W AXIAL 9,435 $0.5320 In Stock
WLBR005FET RES 5M OHM 1% 1W AXIAL 9,441 $0.5320 In Stock
WLCR030FET RES 30M OHM 1% 2W AXIAL 9,446 $0.5320 In Stock
WLAR005FET RES 5M OHM 1% 1/2W AXIAL 9,444 $0.5320 In Stock
WLBR010FET RES 10M OHM 1% 1W AXIAL 9,445 $0.5320 In Stock
WLCR020FET RES 20M OHM 1% 2W AXIAL 9,448 $0.5320 In Stock
WLAR020FET RES 20M OHM 1% 1/2W AXIAL 9,438 $0.5320 In Stock
+ 37 more variants in stock — browse the full category

Technical Parameters

WLCR005FE Specifications

Series WL
Package Bulk
Part Status Active
Resistance 5 mOhms
Tolerance ±1%
Power (Watts) 2W
Composition Wirewound
Features Current Sense, Moisture Resistant
Temperature Coefficient ±300ppm/°C
Operating Temperature -
Package / Case Axial
Supplier Device Package Axial
Size / Dimension 0.180" Dia x 0.449" L (4.57mm x 11.40mm)
Height - Seated (Max) -
Number of Terminations 2
Failure Rate -

Buying Guide

Choosing Resistors

When selecting a chip resistor, match four parameters in order of impact: resistance value and tolerance (5% suffices for pulls and straps; 1% or better for precision dividers), power rating (0603 standard is 0.1 W — derate 50% for continuous duty in enclosed assemblies), temperature coefficient (±100~200 ppm/°C typical for thick film; use thin film below ±50 ppm/°C where stability matters), and packaging (tape & reel for automated assembly, cut tape for prototyping). For zero-ohm jumpers, verify the maximum continuous current — most 0603 jumpers handle 1–2 A. In humid or automotive environments, prefer moisture-resistant coatings and AEC-Q200-qualified parts. Higher voltages need larger cases or anti-surge (thick-film surge-resistant) constructions, since arcing and creepage limits scale with package geometry.

Cross-Brand Equivalents

Specs-Comparable Alternatives

Matched on package, key parameters and mounting
Part Number Description Stock Unit Price Match
WLAR005FE RES 0.005 OHM 1/2W 1% AXIAL 16,719 $0.2996 100%
WLCR005FET RES 5M OHM 1% 2W AXIAL 9,430 $0.5320 100%
WLAR005FET RES 5M OHM 1% 1/2W AXIAL 9,444 $0.5320 100%
WLBR005FE RES 5M OHM 1% 1W AXIAL 3,602 RFQ 67%
WLBR005FET RES 5M OHM 1% 1W AXIAL 9,441 $0.5320 67%
Alternatives verified in stock at Xinyun IC Verify dielectric and reflow profile against the datasheet before release

Same Manufacturer

Ohmite Parts in Stock

Request a Quote

Need WLCR005FE or an alternative?

Send your quantity — our team replies with pricing and lead time within 24 hours, from franchised channels only.