UCC3808N-2 Texas Instruments component image

UCC3808N-2

In Stock

Texas Instruments logo Texas Instruments · franchised distributor

IC REG CTRLR PUSH-PULL 8DIP

Listed in PMIC - Voltage Regulators - DC DC Switching Controllers

1,197 pcs in stock ships same day before 6pm

from $2.0971

Quantity Unit Price
1 - 9 $4.3400
10 - 49 $3.8996
50 - 99 $3.6864
100 - 499 $3.1948
500 - 999 $2.7197
1,000 - 2,499 $2.2937
2,500 - 4,999 $2.1790
5,000+ $2.0971 BEST
100% Original Same-Day Ship 180-Day Warranty Worldwide Delivery

Overview

What is the UCC3808N-2?

UCC3808N-2 is a ic reg ctrlr push-pull 8dip, featuring the 8-DIP (0.300", 7.62mm) package, Through Hole mounting. Available from Xinyun IC with immediate dispatch and a 180-day warranty.

Same Series

Texas Instruments Series Variants in Stock

15 variants of this series in stock
Part Number Description Stock Unit Price Status
UCC2808DTR-2G4 IC REG CTRLR PUSH-PULL 8SOIC 2,656 $1.9105 In Stock
UCC3808DTR-2G4 IC REG CTRLR PUSH-PULL 8SOIC 2,664 $1.9105 In Stock
UCC2808DTR-2 IC REG CTRLR PUSH-PULL 8SOIC 1,599 $3.2100 In Stock
UCC3808D-2 IC REG CTRLR PUSH-PULL 8SOIC 1,329 $3.8600 In Stock
UCC3808DTR-2 IC REG CTRLR PUSH-PULL 8SOIC 2,660 $1.9105 In Stock
UCC2808D-2 IC REG CTRLR PUSH-PULL 8SOIC 1,325 $3.8600 In Stock
UCC2808D-2G4 IC REG CTRLR PUSH-PULL 8SOIC 1,805 $2.8380 In Stock
UCC3808N-2G4 IC REG CTRLR PUSH-PULL 8DIP 1,610 $3.1915 In Stock
UCC3808N-1 IC REG CTRLR ISO PWM CM 8DIP 2,191 $2.3297 In Stock
UCC2808D-1 IC REG CTRLR ISO PWM CM 8-SOIC 1,713 $2.9700 In Stock
+ 5 more variants in stock — browse the full category

Technical Parameters

UCC3808N-2 Specifications

Series -
Package Tube
Part Status Active
Output Type Transistor Driver
Function Step-Up/Step-Down
Output Configuration Positive
Topology Push-Pull
Number of Outputs 2
Output Phases 1
Voltage - Supply (Vcc/Vdd) 4.1V ~ 15V
Frequency - Switching 194kHz
Duty Cycle (Max) 49%
Synchronous Rectifier No
Clock Sync No
Serial Interfaces -
Control Features Frequency Control
Operating Temperature 0°C ~ 70°C (TA)
Mounting Type Through Hole
Package / Case 8-DIP (0.300", 7.62mm)
Supplier Device Package 8-PDIP

Buying Guide

Choosing Integrated Circuits (ICs)

Choosing an IC starts with the datasheet's absolute maximums and recommended operating conditions — never design to typical values. For microcontrollers, budget 30–50% flash/RAM headroom and verify peripheral availability in the exact package (pin-count often removes features). For power ICs, check the controller's minimum on-time, bootstrap voltage and thermal derating at your switching frequency. Interface transceivers must match the bus standard's fault ratings — RS-485 common-mode range, CAN bus fault protection (±40 V or system-level parts). Verify the moisture sensitivity level (MSL) for BGA/QFN parts in your reflow process, and always order by full part number including suffix (package, temperature grade, reel size) — the base number alone is ambiguous.

Cross-Brand Equivalents

Specs-Comparable Alternatives

Matched on package, key parameters and mounting
Part Number Description Stock Unit Price Match
UCC2808AN-2G4 UCC2808A-2 LOW-POWER CURRENT-MOD 2,226 $2.2900 100%
UCC2808N-2 UCC2808-2 LOW POWER CURRENT MODE 2,219 $2.2900 100%
UCC3808N-2G4 IC REG CTRLR PUSH-PULL 8DIP 1,610 $3.1915 100%
UCC3808AN-2 UCC3808A-2 LOW-POWER CURRENT-MOD 2,224 $2.2900 100%
UCC2808AN-2 UCC2808A-2 LOW-POWER CURRENT-MOD 2,223 $2.2900 100%
Alternatives verified in stock at Xinyun IC Verify dielectric and reflow profile against the datasheet before release

Same Manufacturer

Texas Instruments Parts in Stock

Request a Quote

Need UCC3808N-2 or an alternative?

Send your quantity — our team replies with pricing and lead time within 24 hours, from franchised channels only.