UA741MN STMicroelectronics component image

UA741MN

In Stock

STMicroelectronics logo STMicroelectronics · franchised distributor

IC OPAMP GP 1 CIRCUIT 8DIP

Listed in Linear - Amplifiers - Instrumentation, OP Amps, Buffer Amps

2,036 pcs in stock ships same day before 6pm

RFQ for pricing — volume discounts available for this part.

100% Original Same-Day Ship 180-Day Warranty Worldwide Delivery

Overview

What is the UA741MN?

UA741MN is a ic opamp gp 1 circuit 8dip, featuring the 8-DIP (0.300", 7.62mm) package, Through Hole mounting. Available from Xinyun IC with immediate dispatch and a 180-day warranty.

Same Series

STMicroelectronics Series Variants in Stock

8 variants of this series in stock
Part Number Description Stock Unit Price Status
UA741MDT IC OPAMP GP 1 CIRCUIT 8SO 4,416 RFQ In Stock
UA741CN IC OPAMP GP 1 CIRCUIT 8DIP 3,761 RFQ In Stock
UA741ID IC OPAMP GP 1 CIRCUIT 8SO 1,825 $2.8100 In Stock
UA741MD IC OPAMP GP 1 CIRCUIT 8SO 3,942 RFQ In Stock
UA741CDT IC OPAMP GP 1 CIRCUIT 8SO 9,289 $0.5400 In Stock
UA741IN IC OPAMP GP 1 CIRCUIT 8DIP 3,214 RFQ In Stock
UA741IDT IC OPAMP GP 1 CIRCUIT 8SO 7,285 $0.6900 In Stock
+ 1 more variants in stock — browse the full category

Technical Parameters

UA741MN Specifications

Series -
Package Tube
Part Status Obsolete
Amplifier Type General Purpose
Number of Circuits 1
Output Type -
Slew Rate 0.5V/µs
Gain Bandwidth Product 1 MHz
-3db Bandwidth -
Current - Input Bias 10 nA
Voltage - Input Offset 1 mV
Current - Supply 1.7mA
Current - Output / Channel 25 mA
Voltage - Supply, Single/Dual (±) 10V ~ 44V, ±5V ~ 22V
Operating Temperature -55°C ~ 125°C
Mounting Type Through Hole
Package / Case 8-DIP (0.300", 7.62mm)
Supplier Device Package 8-DIP

Buying Guide

Choosing Integrated Circuits (ICs)

Choosing an IC starts with the datasheet's absolute maximums and recommended operating conditions — never design to typical values. For microcontrollers, budget 30–50% flash/RAM headroom and verify peripheral availability in the exact package (pin-count often removes features). For power ICs, check the controller's minimum on-time, bootstrap voltage and thermal derating at your switching frequency. Interface transceivers must match the bus standard's fault ratings — RS-485 common-mode range, CAN bus fault protection (±40 V or system-level parts). Verify the moisture sensitivity level (MSL) for BGA/QFN parts in your reflow process, and always order by full part number including suffix (package, temperature grade, reel size) — the base number alone is ambiguous.

Cross-Brand Equivalents

Specs-Comparable Alternatives

Matched on package, key parameters and mounting
Part Number Description Stock Unit Price Match
OPA604AP IC OPAMP GP 1 CIRCUIT 8DIP 1,476 $3.5000 99%
OPA604APG4 IC OPAMP GP 1 CIRCUIT 8DIP 2,095 $2.4434 99%
UPC741C-A OPERATIONAL AMPLIFIER 9,845 $0.5100 96%
OPA552PA IC OPAMP GP 1 CIRCUIT 8DIP 1,051 $4.9700 96%
OPA551PAG4 IC OPAMP GP 1 CIRCUIT 8DIP 1,195 $4.3200 96%
LF412CN/NOPB IC OPAMP JFET 2 CIRCUIT 8DIP 3,082 $1.6400 96%
Alternatives verified in stock at Xinyun IC Verify dielectric and reflow profile against the datasheet before release

Same Manufacturer

STMicroelectronics Parts in Stock

Request a Quote

Need UA741MN or an alternative?

Send your quantity — our team replies with pricing and lead time within 24 hours, from franchised channels only.