TSV630IQ1T STMicroelectronics component image

TSV630IQ1T

In Stock

STMicroelectronics logo STMicroelectronics · franchised distributor

IC OPAMP GP 1 CIRCUIT 6DFN

Listed in Linear - Amplifiers - Instrumentation, OP Amps, Buffer Amps

5,464 pcs in stock ships same day before 6pm

from $0.3761

Quantity Unit Price
1 - 2,999 $0.9200
3,000 - 5,999 $0.4182
6,000 - 14,999 $0.3998
15,000 - 29,999 $0.3866
30,000+ $0.3761 BEST
100% Original Same-Day Ship 180-Day Warranty Worldwide Delivery

Overview

What is the TSV630IQ1T?

TSV630IQ1T is a ic opamp gp 1 circuit 6dfn, featuring the 6-XFDFN package, Surface Mount mounting. Stocked at Xinyun IC — volume pricing and datasheet support available on request.

Same Series

STMicroelectronics Series Variants in Stock

11 variants of this series in stock
Part Number Description Stock Unit Price Status
TSV630ILT IC OPAMP GP 1 CIRCUIT SOT23-6 5,930 $0.8500 In Stock
TSV630AIQ1T IC OPAMP GP 1 CIRCUIT 6DFN 1,014 RFQ In Stock
TSV631AICT IC OPAMP GP 1 CIRCUIT SC70-5 5,187 $0.9700 In Stock
TSV630ICT IC OPAMP GP 1 CIRCUIT SC70-6 5,246 $0.9600 In Stock
TSV631ICT IC OPAMP GP 1 CIRCUIT SC70-5 5,659 $0.8900 In Stock
TSV630AICT IC OPAMP GP 1 CIRCUIT SC70-6 4,803 $1.0500 In Stock
TSV631IYLT IC OPAMP GP 1 CIRCUIT SOT23-5 5,150 $0.9800 In Stock
TSV630AILT IC OPAMP GP 1 CIRCUIT SOT23-6 5,147 $0.9800 In Stock
TSV631ILT IC OPAMP GP 1 CIRCUIT SOT23-5 6,452 $0.7800 In Stock
TSV630IQ2T IC OPAMP GP 1 CIRCUIT 8DFN 5,411 $0.9300 In Stock
+ 1 more variants in stock — browse the full category

Technical Parameters

TSV630IQ1T Specifications

Series -
Package Tape & Reel (TR)Cut Tape (CT)Digi-Reel®
Part Status Active
Amplifier Type General Purpose
Number of Circuits 1
Output Type Rail-to-Rail
Slew Rate 0.34V/µs
Gain Bandwidth Product 880 kHz
-3db Bandwidth -
Current - Input Bias 1 pA
Voltage - Input Offset 3 mV
Current - Supply 60µA
Current - Output / Channel 74 mA
Voltage - Supply, Single/Dual (±) 1.5V ~ 5.5V
Operating Temperature -40°C ~ 125°C
Mounting Type Surface Mount
Package / Case 6-XFDFN
Supplier Device Package 6-DFN (1.2x1.3)

Buying Guide

Choosing Integrated Circuits (ICs)

Choosing an IC starts with the datasheet's absolute maximums and recommended operating conditions — never design to typical values. For microcontrollers, budget 30–50% flash/RAM headroom and verify peripheral availability in the exact package (pin-count often removes features). For power ICs, check the controller's minimum on-time, bootstrap voltage and thermal derating at your switching frequency. Interface transceivers must match the bus standard's fault ratings — RS-485 common-mode range, CAN bus fault protection (±40 V or system-level parts). Verify the moisture sensitivity level (MSL) for BGA/QFN parts in your reflow process, and always order by full part number including suffix (package, temperature grade, reel size) — the base number alone is ambiguous.

Same Manufacturer

STMicroelectronics Parts in Stock

Request a Quote

Need TSV630IQ1T or an alternative?

Send your quantity — our team replies with pricing and lead time within 24 hours, from franchised channels only.