TSB712IDT STMicroelectronics component image

TSB712IDT

In Stock

STMicroelectronics logo STMicroelectronics · franchised distributor

IC OPAMP GP 2 CIRCUIT 8SOIC

Listed in Linear - Amplifiers - Instrumentation, OP Amps, Buffer Amps

2,469 pcs in stock ships same day before 6pm

from $0.8515

Quantity Unit Price
1 - 2,499 $2.0500
2,500 - 4,999 $0.8843
5,000+ $0.8515 BEST
100% Original Same-Day Ship 180-Day Warranty Worldwide Delivery

Overview

What is the TSB712IDT?

TSB712IDT is a ic opamp gp 2 circuit 8soic, featuring the 8-SOIC (0.154", 3.90mm Width) package, Surface Mount mounting. Stocked at Xinyun IC — volume pricing and datasheet support available on request.

Same Series

STMicroelectronics Series Variants in Stock

5 variants of this series in stock
Part Number Description Stock Unit Price Status
TSB712AIYDT IC OPAMP GP 2 CIRCUIT 8SOIC 1,887 $2.7000 In Stock
TSB712AIYST IC OPAMP GP 2 CIRCUIT 8MINISO 1,891 $2.7000 In Stock
TSB712AIDT IC OPAMP GP 2 CIRCUIT 8SOIC 2,296 $2.2200 In Stock
TSB712IST IC OPAMP GP 2 CIRCUIT 8MINISO 2,476 $2.0500 In Stock
+ 1 more variants in stock — browse the full category

Technical Parameters

TSB712IDT Specifications

Series Automotive, AEC-Q100
Package Tape & Reel (TR)Cut Tape (CT)Digi-Reel®
Part Status Active
Amplifier Type General Purpose
Number of Circuits 2
Output Type Rail-to-Rail
Slew Rate 3V/µs
Gain Bandwidth Product 6 MHz
-3db Bandwidth -
Current - Input Bias 300 nA
Voltage - Input Offset 1.2 mV
Current - Supply 1.8mA
Current - Output / Channel 50 mA
Voltage - Supply, Single/Dual (±) 2.7V ~ 36V, ±1.35V ~ 18V
Operating Temperature -40°C ~ 125°C
Mounting Type Surface Mount
Package / Case 8-SOIC (0.154", 3.90mm Width)
Supplier Device Package 8-SOIC

Buying Guide

Choosing Integrated Circuits (ICs)

Choosing an IC starts with the datasheet's absolute maximums and recommended operating conditions — never design to typical values. For microcontrollers, budget 30–50% flash/RAM headroom and verify peripheral availability in the exact package (pin-count often removes features). For power ICs, check the controller's minimum on-time, bootstrap voltage and thermal derating at your switching frequency. Interface transceivers must match the bus standard's fault ratings — RS-485 common-mode range, CAN bus fault protection (±40 V or system-level parts). Verify the moisture sensitivity level (MSL) for BGA/QFN parts in your reflow process, and always order by full part number including suffix (package, temperature grade, reel size) — the base number alone is ambiguous.

Cross-Brand Equivalents

Specs-Comparable Alternatives

Matched on package, key parameters and mounting
Part Number Description Stock Unit Price Match
INA148QDRQ1 IC OPAMP DIFF 1 CIRCUIT 8SOIC 856 $6.1300 100%
NCS20072DR2G IC OPAMP GP 2 CIRCUIT 8SOIC 6,979 $0.7200 100%
TSB7192IYDT IC OPAMP GP 2 CIRCUIT 8SO 2,076 $2.4500 100%
TSB712IYDT IC OPAMP GP 2 CIRCUIT 8SOIC 2,110 $2.4200 100%
INA148UA IC OPAMP DIFF 1 CIRCUIT 8SOIC 783 $6.7300 100%
INA148UA/2K5 IC OPAMP DIFF 1 CIRCUIT 8SOIC 997 $5.1900 100%
Alternatives verified in stock at Xinyun IC Verify dielectric and reflow profile against the datasheet before release

Same Manufacturer

STMicroelectronics Parts in Stock

Request a Quote

Need TSB712IDT or an alternative?

Send your quantity — our team replies with pricing and lead time within 24 hours, from franchised channels only.