TS932BIDT STMicroelectronics component image

TS932BIDT

In Stock

STMicroelectronics logo STMicroelectronics · franchised distributor

IC OPAMP GP 2 CIRCUIT 8SO

Listed in Linear - Amplifiers - Instrumentation, OP Amps, Buffer Amps

1,380 pcs in stock ships same day before 6pm

RFQ for pricing — volume discounts available for this part.

100% Original Same-Day Ship 180-Day Warranty Worldwide Delivery

Overview

What is the TS932BIDT?

TS932BIDT is a ic opamp gp 2 circuit 8so, featuring the 8-SOIC (0.154", 3.90mm Width) package, Surface Mount mounting. It is in stock at Xinyun IC with tiered pricing and same-day worldwide shipping.

Same Series

STMicroelectronics Series Variants in Stock

32 variants of this series in stock
Part Number Description Stock Unit Price Status
TS932BID IC OPAMP GP 2 CIRCUIT 8SO 3,480 RFQ In Stock
TS931BIDT IC OPAMP GP 1 CIRCUIT 8SO 2,700 RFQ In Stock
TS932IN IC OPAMP GP 2 CIRCUIT 8DIP 2,048 RFQ In Stock
TS934BIDT IC OPAMP GP 4 CIRCUIT 14SO 1,613 RFQ In Stock
TS931BILT IC OPAMP GP 1 CIRCUIT SOT23-5 4,580 $1.1000 In Stock
TS934IYDT IC OPAMP GP 4 CIRCUIT 14SO 2,687 $1.8900 In Stock
TS934BIN IC OPAMP GP 4 CIRCUIT 14DIP 2,231 RFQ In Stock
TS932IDT IC OPAMP GP 2 CIRCUIT 8SO 3,746 $1.3500 In Stock
TS934IDT IC OPAMP GP 4 CIRCUIT 14SO 3,127 $1.6200 In Stock
TS934AIPT IC OPAMP GP 4 CIRCUIT 14TSSOP 3,053 RFQ In Stock
+ 22 more variants in stock — browse the full category

Technical Parameters

TS932BIDT Specifications

Series Automotive, AEC-Q100
Package Tape & Reel (TR)
Part Status Obsolete
Amplifier Type General Purpose
Number of Circuits 2
Output Type Rail-to-Rail
Slew Rate 0.05V/µs
Gain Bandwidth Product 100 kHz
-3db Bandwidth -
Current - Input Bias 1 pA
Voltage - Input Offset 2 mV
Current - Supply 20µA (x2 Channels)
Current - Output / Channel 5 mA
Voltage - Supply, Single/Dual (±) 2.7V ~ 10V
Operating Temperature -40°C ~ 105°C
Mounting Type Surface Mount
Package / Case 8-SOIC (0.154", 3.90mm Width)
Supplier Device Package 8-SOIC

Buying Guide

Choosing Integrated Circuits (ICs)

Choosing an IC starts with the datasheet's absolute maximums and recommended operating conditions — never design to typical values. For microcontrollers, budget 30–50% flash/RAM headroom and verify peripheral availability in the exact package (pin-count often removes features). For power ICs, check the controller's minimum on-time, bootstrap voltage and thermal derating at your switching frequency. Interface transceivers must match the bus standard's fault ratings — RS-485 common-mode range, CAN bus fault protection (±40 V or system-level parts). Verify the moisture sensitivity level (MSL) for BGA/QFN parts in your reflow process, and always order by full part number including suffix (package, temperature grade, reel size) — the base number alone is ambiguous.

Cross-Brand Equivalents

Specs-Comparable Alternatives

Matched on package, key parameters and mounting
Part Number Description Stock Unit Price Match
TS931IDT IC OPAMP GP 1 CIRCUIT 8SO 9,259 $0.5425 100%
TS932IDT IC OPAMP GP 2 CIRCUIT 8SO 3,746 $1.3500 100%
TS972IYDT IC OPAMP GP 2 CIRCUIT 8SO 4,113 $1.2300 100%
TS462CDT IC OPAMP GP 2 CIRCUIT 8SO 6,296 $0.8000 100%
TS461CDT IC OPAMP GP 1 CIRCUIT 8SO 6,073 $0.8300 100%
TS931AIDT IC OPAMP GP 1 CIRCUIT 8SO 3,394 RFQ 100%
Alternatives verified in stock at Xinyun IC Verify dielectric and reflow profile against the datasheet before release

Same Manufacturer

STMicroelectronics Parts in Stock

Request a Quote

Need TS932BIDT or an alternative?

Send your quantity — our team replies with pricing and lead time within 24 hours, from franchised channels only.