TS271IN STMicroelectronics component image

TS271IN

In Stock

STMicroelectronics logo STMicroelectronics · franchised distributor

IC OPAMP GP 1 CIRCUIT 8DIP

Listed in Linear - Amplifiers - Instrumentation, OP Amps, Buffer Amps

774 pcs in stock ships same day before 6pm

RFQ for pricing — volume discounts available for this part.

100% Original Same-Day Ship 180-Day Warranty Worldwide Delivery

Overview

What is the TS271IN?

TS271IN is a ic opamp gp 1 circuit 8dip, featuring the 8-DIP (0.300", 7.62mm) package, Through Hole mounting. It is in stock at Xinyun IC with tiered pricing and same-day worldwide shipping.

Same Series

STMicroelectronics Series Variants in Stock

13 variants of this series in stock
Part Number Description Stock Unit Price Status
TS271AID IC OPAMP GP 1 CIRCUIT 8SO 2,111 RFQ In Stock
TS271ID IC OPAMP GP 1 CIRCUIT 8SO 1,727 RFQ In Stock
TS271AIDT IC OPAMP GP 1 CIRCUIT 8SO 1,886 RFQ In Stock
TS271CD IC OPAMP GP 1 CIRCUIT 8SO 1,611 RFQ In Stock
TS271ACN IC OPAMP GP 1 CIRCUIT 8DIP 4,393 $1.1500 In Stock
TS271ACDT IC OPAMP GP 1 CIRCUIT 8SO 4,381 $1.1500 In Stock
TS271CN IC OPAMP GP 1 CIRCUIT 8DIP 4,473 RFQ In Stock
TS271BIDT IC OPAMP GP 1 CIRCUIT 8SO 3,411 RFQ In Stock
TS271BID IC OPAMP GP 1 CIRCUIT 8SO 1,092 RFQ In Stock
TS271ACD IC OPAMP GP 1 CIRCUIT 8SO 4,241 RFQ In Stock
+ 3 more variants in stock — browse the full category

Technical Parameters

TS271IN Specifications

Series -
Package Tube
Part Status Obsolete
Amplifier Type General Purpose
Number of Circuits 1
Output Type -
Slew Rate 0.04V/µs
Gain Bandwidth Product 100 kHz
-3db Bandwidth -
Current - Input Bias 1 pA
Voltage - Input Offset 1.1 mV
Current - Supply 10µA
Current - Output / Channel 45 mA
Voltage - Supply, Single/Dual (±) 3V ~ 16V, ±1.5V ~ 8V
Operating Temperature -40°C ~ 125°C
Mounting Type Through Hole
Package / Case 8-DIP (0.300", 7.62mm)
Supplier Device Package 8-DIP

Buying Guide

Choosing Integrated Circuits (ICs)

Choosing an IC starts with the datasheet's absolute maximums and recommended operating conditions — never design to typical values. For microcontrollers, budget 30–50% flash/RAM headroom and verify peripheral availability in the exact package (pin-count often removes features). For power ICs, check the controller's minimum on-time, bootstrap voltage and thermal derating at your switching frequency. Interface transceivers must match the bus standard's fault ratings — RS-485 common-mode range, CAN bus fault protection (±40 V or system-level parts). Verify the moisture sensitivity level (MSL) for BGA/QFN parts in your reflow process, and always order by full part number including suffix (package, temperature grade, reel size) — the base number alone is ambiguous.

Cross-Brand Equivalents

Specs-Comparable Alternatives

Matched on package, key parameters and mounting
Part Number Description Stock Unit Price Match
NJU7031D IC OPAMP GP 1 CIRCUIT 8DIP 2,513 RFQ 100%
NJU7022D IC OPAMP GP 2 CIRCUIT 8DIP 5,968 $0.8449 100%
TLC27L1CP TLC27L1 LINCMOS LOW-POWER OPERAT 6,994 $0.7200 100%
NJU7021D IC OPAMP GP 1 CIRCUIT 8DIP 5,308 $0.9500 100%
ALD1703PAL IC OPAMP GP 1 CIRCUIT 8DIP 1,158 $4.5076 100%
AD8005ANZ IC CFA 1 CIRCUIT 8DIP 2,428 $2.0900 100%
Alternatives verified in stock at Xinyun IC Verify dielectric and reflow profile against the datasheet before release

Same Manufacturer

STMicroelectronics Parts in Stock

Request a Quote

Need TS271IN or an alternative?

Send your quantity — our team replies with pricing and lead time within 24 hours, from franchised channels only.