TR100JBD10R0 Stackpole Electronics, Inc. component image

TR100JBD10R0

In Stock

Stackpole Electronics, Inc. logo Stackpole Electronics, Inc. · franchised distributor

RES 10 OHM 100W 5% TO247-2

Listed in Through Hole Resistors

822 pcs in stock ships same day before 6pm

from $6.4000

Quantity Unit Price
1 - 104 $6.4000 BEST
105+ $6.4000 BEST
100% Original Same-Day Ship 180-Day Warranty Worldwide Delivery

Overview

What is the TR100JBD10R0?

TR100JBD10R0 is a res 10 ohm 100w 5% to247-2, featuring a power rating of 100W, a tolerance of ±5%, a Thick Film composition, and the TO-247-2 case. Available from Xinyun IC with immediate dispatch and a 180-day warranty.

Same Series

Stackpole Electronics, Inc. Series Variants in Stock

50+ variants of this series in stock
Part Number Description Stock Unit Price Status
TR35JBC100R RES 100 OHM 35W 5% TO220 1,385 $3.7000 In Stock
TR20JBL4R70 RES 4.7 OHM 20W 5% TO220 1,715 $2.9785 In Stock
TR50JBL2R20 RES 2.2 OHM 50W 5% TO220 1,092 $4.7800 In Stock
TR20JBXR250 RES 0.25 OHM 20W 5% TO220 1,706 $3.0188 In Stock
TR20JBC15R0 RES 15 OHM 20W 5% TO220 1,722 $2.9785 In Stock
TR35JBL4R70 RES 4.7 OHM 35W 5% TO220 1,343 $3.8600 In Stock
TR35JBC75R0 RES 75 OHM 35W 5% TO220 1,331 $3.8600 In Stock
TR20JBD10R0 RES 10 OHM 20W 5% TO220 1,710 $2.9785 In Stock
TR35JBL1R50 RES 1.5 OHM 35W 5% TO220 1,394 $3.7000 In Stock
TR50JBC47R0 RES 47 OHM 50W 5% TO220 1,591 $3.2200 In Stock
More variants of this series in stock — browse the full category

Technical Parameters

TR100JBD10R0 Specifications

Series TR
Package Bulk
Part Status Active
Resistance 10 Ohms
Tolerance ±5%
Power (Watts) 100W
Composition Thick Film
Features Moisture Resistant, Non-Inductive
Temperature Coefficient ±100ppm/°C
Operating Temperature -65°C ~ 175°C
Package / Case TO-247-2
Supplier Device Package TO-247
Size / Dimension 0.620" L x 0.195" W (15.75mm x 4.95mm)
Height - Seated (Max) 0.825" (20.96mm)
Number of Terminations 2
Failure Rate -

Buying Guide

Choosing Resistors

When selecting a chip resistor, match four parameters in order of impact: resistance value and tolerance (5% suffices for pulls and straps; 1% or better for precision dividers), power rating (0603 standard is 0.1 W — derate 50% for continuous duty in enclosed assemblies), temperature coefficient (±100~200 ppm/°C typical for thick film; use thin film below ±50 ppm/°C where stability matters), and packaging (tape & reel for automated assembly, cut tape for prototyping). For zero-ohm jumpers, verify the maximum continuous current — most 0603 jumpers handle 1–2 A. In humid or automotive environments, prefer moisture-resistant coatings and AEC-Q200-qualified parts. Higher voltages need larger cases or anti-surge (thick-film surge-resistant) constructions, since arcing and creepage limits scale with package geometry.

Cross-Brand Equivalents

Specs-Comparable Alternatives

Matched on package, key parameters and mounting
Part Number Description Stock Unit Price Match
AP101 10R J RES 10 OHM 5% 100W TO247-2 648 $8.1100 100%
AP101 12R J RES 12 OHM 5% 100W TO247-2 657 $8.1100 89%
AP101 8R2 J RES 8.2 OHM 5% 100W TO247-2 664 $8.1100 88%
AP101 7R5 J RES 7.5 OHM 5% 100W TO247-2 665 $8.1100 83%
AP101 6R8 J RES 6.8 OHM 5% 100W TO247-2 665 $8.1100 77%
AP101 15R J RES 15 OHM 5% 100W TO247-2 650 $8.1100 76%
Alternatives verified in stock at Xinyun IC Verify dielectric and reflow profile against the datasheet before release

Same Manufacturer

Stackpole Electronics, Inc. Parts in Stock

Request a Quote

Need TR100JBD10R0 or an alternative?

Send your quantity — our team replies with pricing and lead time within 24 hours, from franchised channels only.